• 제목/요약/키워드: FSI

검색결과 811건 처리시간 0.024초

FSI-IDEALS AND FSC-IDEALS OF BCI-ALGEBRAS

  • Liu, Yong-Lin;Liu, San-Yang;Meng, Jie
    • 대한수학회보
    • /
    • 제41권1호
    • /
    • pp.167-179
    • /
    • 2004
  • The notions of FSI-ideals and FSC-ideals in BCI-algebras are introduced. The characterization properties of FSI-ideals and FSC-ideals are obtained. We investigate the relations between FSI-ideals (resp. FSC-ideals) and other fuzzy ideals, between FSI-ideals (resp. FSC-ideals) and BCI-algebras, and show that a fuzzy subset of a BCI-algebra is an FSI-ideal if and only if it is both an FSC-ideal and a fuzzy BCI-positive implicative ideal.

FSI 해석법을 이용한 고속 주축계의 열특성 해석 (Thermal Characteristics Analysis of a High Speed Spindle System by Using FSI Method)

  • 김수태;이석준;최영휴
    • 한국기계가공학회지
    • /
    • 제13권3호
    • /
    • pp.83-88
    • /
    • 2014
  • FSI (Fluid Structure Interaction) method, in this study, has been applied to analyzing thermal characteristics of a high speed machine tool spindle system. The spindle is composed of angular contact ceramic ball bearings, a high speed built-in motor, a cooling jacket, and so on. The cooling jacket has three inlets and outlets. Using the FSI method, temperature distributions and thermal displacements of the spindle system were computed considering the heating of the front and rear bearings and the built-in motor. The results computed using the FSI method were compared with those determined by experiment and using the conventional numerical approach. The results determined using the FSI method were similar to those from the conventional numerical approach but showed better agreement with the experimental results. Therefore, it is concluded that the FSI method is useful for analyzing the thermal characteristics of high speed spindles and can be applied to the design of high speed spindles.

인천국제공항의 안개 특성에 따른 안개 안정 지수 FSI(Fog Stability Index) 개발 및 검증 (Development and Verification of the Fog Stability Index for Incheon International Airport based on the Measured Fog Characteristics)

  • 송윤영;염성수
    • 대기
    • /
    • 제23권4호
    • /
    • pp.443-452
    • /
    • 2013
  • The original Fog Stability Index (FSI) is formulated as FSI=$2(T-T_d)+2(T-T_{850})+WS_{850}$, where $T-T_d$ is dew point deficit (temperature-dew point temperature), $T-T_{850}$ is atmospheric stability measure (temperature-temperature at 850 hPa altitude) and $WS_{850}$ is wind speed at 850 hPa altitude. As a way to improve fog prediction at Incheon International Airport (IIA), we develop the modified FSI for IIA, using the meteorological data at IIA for two years from June 2011 to May 2013, the first one year for development and the second one year for validation. The relative contribution of the three parameters of the modified FSI is 9: 1: 0, indicating that $WS_{850}$ is found to be a non-contributing factor for fog formation at IIA. The critical success index (CSI) of the modified FSI is 0.68. Further development is made to consider the fact that fogs at IIA are highly influenced by advection of moisture from the Yellow Sea. One added parameter after statistical evaluation of the several candidate parameters is the dew point deficit at a buoy over the Yellow Sea. The relative contribution of the four parameters (including the new one) of the newly developed FSI is 10: 2: 0.5: 6.4. The CSI of the new FSI is 0.50. Since the developmental period of one year is too short, the FSI should be refined more as the data are accumulated more.

FSI 기법을 적용한 인체 회전 시 협착 혈관에서의 혈류 특성 (Study of Blood Characteristics in Stenosed Artery under Human Body Rotation by Using FSI Method)

  • 조성욱;김승욱;노경철;유홍선
    • 대한기계학회논문집B
    • /
    • 제37권5호
    • /
    • pp.449-457
    • /
    • 2013
  • 본 논문에서는 FSI(Fluid-Structure Interaction)기법을 이용하여 인체 회전의 영향을 고려한 혈류와 혈관벽의 거동을 이해하기 위한 수치해석을 수행하였다. 혈관은 협착률이 50%이고 편심이 없는 형상이며 인체 회전 효과를 묘사하기 위하여 혈관 주축에 대해 2 ~ 6 rps 의 회전을 가하였다. 협착과 축 회전의 영향으로 나선형, 비대칭 유동이 강체와 FSI 모델에서 모두 나타났다. 그러나 FSI 모델에서 혈관벽 움직임의 영향으로 혈류의 주기적, 과도적 차이가 발생했다. 특히 혈관 내 경화반의 진전과 경화반 위험성을 나타내는 대표적인 인자로 알려진 유동 재순환 영역이 감소하였다. 혈관벽의 움직임은 협착과 회전효과와 마찬가지로 유동 재순환 영역의 생성에 영향을 미친다.

미국의 축산물중 잔류물질 검사제도 소개

  • 박종명
    • 대한수의사회지
    • /
    • 제29권3호
    • /
    • pp.165-167
    • /
    • 1993
  • 1. FDA와 FSIS는 제약회사에서 설정한 잔류 검사 방법의 유효성과 실용성에 대하여 합의한다. 2. FSIS는 식용동물에서 약물이나 살충제, 환경오염물질의 잔류를 조사한다. 3. FSIS에서 불법적인 약물잔류를 발견하면 FDA와 가축생산자 그리고 적절한 주정부기관에 통보한다. 4. FDA나 적절한 주 정부기관은 의심되는 생산자의 현장조사를 할 수도 있다. 만약 중대한 법률의 위반이 발견되거나 불법적인 잔류가 반복된 경우 생산자에게 벌금형이 부과될 수도 있다. 5. 유죄로 판결된 동물약품남용자는 죄과에 따라 벌금형이나 징역형을 받을 수 있다. 6. 출고 보류된 가축에서 불법적인 잔류가 발견되면 FSIS에 의해 폐기되며 이러한 가축의 생산자는 그들이 생산하는 가축이 잔류허용한계에 적합하다는 것이 증명될 때까지 출하를 금지 당할 수 있다.

  • PDF

발전용 저압터빈 최종단 블레이드의 정적 유체-구조 연계해석 (Static Fluid-Structure Coupled Analysis of Low-Pressure Final-Stage Turbine Blade)

  • 권순국;이영신;배용채
    • 대한기계학회논문집A
    • /
    • 제34권8호
    • /
    • pp.1067-1074
    • /
    • 2010
  • 본 논문에서는, 운전조건에서의 저압최종단 블레이드에 대하여 약결합 유체-구조 연계해석기법을 이용한 해석이 수행되었다. 저압터빈 최종단에 대한 해석이전에 경계조건에 대한 검증을 위하여 15도 후퇴익과 NASA Rotor 37을 대상으로 예비해석이 수행되었다. 각각의 해석결과들을 기존 문헌들과 비교하였다. 15도 후퇴익에 대한 안정상태와 불안정상태에서 동적 FSI해석이 수행되었다. 해석결과 변위가 일정한 안정상태에 비하여 고속에서는 0.05 초 만에 발산하는 결과를 산출하였다. NASA Rotor 37의 정상상태 해석결과를 바탕으로 정적 동적 FSI 해석을 수행하여 뒷전의 변형크기에 대하여 정적 FSI 결과와 동적 FSI간의 차이가 있음을 확인하였다. 저압 최종단 블레이드의 형상측정 및 동특성시험을 바탕으로 해석모델을 생성하였다. 이를 바탕으로, 운전조건에서 저압최종단 블레이드에 대한 정적 유체-구조 연계해석을 성공적으로 수행하였다.

FSI 해석에 의한 비정형 초고층 빌딩의 풍응답 특성에 관한 연구 (A Study on the Wind-Induced Response Characteristics of Freeform Shaped Tall Building using FSI Analysis)

  • 박성철;김효진;한상을
    • 한국전산구조공학회논문집
    • /
    • 제27권4호
    • /
    • pp.223-230
    • /
    • 2014
  • 본 논문에서는 FSI해석을 이용하여 비정형 초고층 빌딩의 풍응답 특성을 연구하였다. 해석모델은 Twist모델이며, 뒤틀림 각도와 풍가속도의 상관관계에 대해 연구 중점을 두었다. 먼저 단방향 해석을 수행하여 100년 재현주기 풍속에 대한 최대 횡 변위를 구하고, 제한조건을 만족하는 탄성계수를 산출한다. 그리고 양방향 해석을 수행, 시간이력해석을 통해 산출된 탄성계수와 임의의 밀도를 가지는 풍가속도를 예측하게 된다. 정방형 모델은 높이 400m, 변장비 1:1, 세장비 8로 설정, 뒤틀림 모델은 0도에서 90도까지 15도 간격으로, 90도에서 360도까지 90도 간격으로 비틀어 회전시켰다. 형상에 따른 풍가속도 예측 결과, 정방형 모델이 뒤틀림 모델보다 크게 산출되어 풍진동 영향에 더 민감한 것을 검증하였다.

시뮬레이션 복부 대동맥의 양방향 FSI 유속과 인체 4D flow MRI 유속의 상관계수, 급내상관계수 비교 (Comparison of Correlation Coefficients and Intraclass Correlation Coefficients Between Two-way FSI Flow Velocity of Simulated Abdominal Aorta and Human 4D Flow MRI Flow Velocity)

  • 안해남;김정훈;박지은;최현우;이종민
    • 대한의용생체공학회:의공학회지
    • /
    • 제42권4호
    • /
    • pp.143-149
    • /
    • 2021
  • In order to predict and prevent the disease of the abdominal aorta, which is the largest artery in the human body and the most common aneurysm, the normal arterial blood flow operation should be considered. To this end, we are trying to solve problems that may arise in the future by executing FSI based on the data obtained from 4D flow MRI. However, to match the similarity between the 4D flow MRI flow and the FSI flow, correlation was used in previous papers, but the correlation did not show the degree of agreement. Therefore, in this paper, we analyzed the correlation between the 4D flow MRI flow velocity of the human abdominal aorta and the two-way FSI flow velocity in which the three physical properties used for the aortic FSI were added to the CT abdominal aorta 3D model and the interclass correlation coefficient. As a result, the physical property M2 showed the highest similarity in correlation and intraclass correlation coefficient, and this property is intended to be helpful in the future study of the abdominal aortic two-way FSI flow rate.