• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.304-306
• /
• 2003

Oceanic pycnocline depth is usually obtained from in situ measurements. As ocean internal waves occur on and propagate along oceanic pycnocline, it is possible to estimate the depth remotely. This paper presents a method for retrieving pycnocline depth from synthetic aperture radar (SAR) imagery where internal waves are visible. This model is constructed by combining a two-layer ocean model and a nonlinear internal wave model. It is also assumed that the observed groups of internal wave packets on SAR imagery are generated by local semidiurnal tides. Case study in East China Sea shows a good agreement with in situ CTD data.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.04a
• /
• pp.329-338
• /
• 2011

Business processes are often of long duration, and include internal worker's decision making, which makes business processes to be exposed to many exceptional situations. These properties of business processes makes it difficult to design processes to support uncertainties from internal or external environments. The behavioral properties of business processes mainly depends on the data aspects of business processes. To formalize the data aspect of process modeling, this paper proposes a graph-based model, called Data Dependency Graph (DDG), constructed from dependency relationships specified between business data. The paper also defines a mechanism of describing a set of mapping rules that generates a process model semantically equivalent to a DDG, which is accomplished by allocating data dependencies to component activities.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.150-154
• /
• 2008

In this research, stress components and principal stresses of O-ring under internal pressure and under uniform squeeze rate were obtained from the stress freezing method of photoelastic experiment and photoelastic experimental Hybrid method for 3-dimensional problems. The obtaining processes of those were introduced. It was certified that the processes of those are effective for the 3-dimensional stress analysis of structures. Stress freezing method, the obtaining processes of those and photoelastic experimental hybrid method were effectively applied to the stress analysis of O-ring made from rubber that under uniform deformation and internal pressure. Stress components and principal stress of Oring under uniform squeeze rate and under internal pressure were analyzed.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.5
• /
• pp.333-342
• /
• 2021

PURPOSE. To evaluate the impact of five different tooth preparation designs on the marginal and internal fit discrepancies of cobalt-chromium (CoCr) crowns produced by computer-aided designing (CAD) and selective laser melting (SLM) processes. MATERIALS AND METHODS. Five preparation data were constructed, after which design crowns were obtained. Actual crowns were fabricated using an SLM process. After the data of actual crowns were obtained with structural light scanning, intaglio surfaces of the design crown and actual crown were virtually superimposed on the preparation. The fit-discrepancies were displayed with colors, while the root means square was calculated and analyzed with one-way analysis of variance (ANOVA), Tukey's test or Kruskal-Wallis test (α = .05). RESULTS. The marginal or internal color-coded images in the five design groups were not identical. The shoulder-lip and sharp line angle groups in the CAD or SLM process had larger marginal or internal fit discrepancies compared to other groups (P < .05). In the CAD process, the mean marginal and internal fit discrepancies were 10.0 to 24.2 ㎛ and 29.6 to 31.4 ㎛, respectively. After the CAD and SLM processes, the mean marginal and internal fit discrepancies were 18.4 to 40.9 ㎛ and 39.1 to 47.1 ㎛, respectively. The SLM process itself resulted in a positive increase of the marginal (6.0 - 16.7 ㎛) and internal (9.0 - 15.7 ㎛) fit discrepancies. CONCLUSION. The CAD and SLM processes affected the fit of CoCr crowns and varied based on the preparation designs. Typically, the shoulder-lip and sharp line angle designs had a more significant effect on crown fit. However, the differences between the design groups were relatively small, especially when compared to fit discrepancies observed clinically.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.2
• /
• pp.224-230
• /
• 2012

Thermal batteries have excellent mechanical robustness, reliability, and long shelf life. Due to these characteristics as well as their unique activation mechanism, thermal batteries are widely adopted as military power sources. Li(Si)/$FeS_2$ thermal batteries, which are used mostly in these days, use LiCl-KCl and LiBr-LiCl-LiF as molten salt electrolyte. However, it is known that Li(Si)/$FeS_2$ thermal batteries have high internal resistance. Especially, $FeS_2$ cathode accounts for the greater part of internal resistance in unit cell. Many efforts have been put into to decrease the internal resistance of thermal batteries, which result in the development of new electrode material and new electrode manufacturing processes. But the applications of these new materials and processes are in some cases very expensive and need complicated additional processes. In this study, internal resistance study was conducted by adding carbon black and carbon nano-tube, which has high electron conductivity, into the $FeS_2$ cathode. As a results, it was found that the decrease of internal resistance of $FeS_2$ cathode by the addition of carbon black and carbon nano-tube.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.832-835
• /
• 1997

In this paper, we first analyze the structural limitation of the conventional PID controller in controlling unstable processes through mathematical proof. To overcome this structural limitation, we add an internal feedback loop to the PID controller. Secondly, we obtain conditions when unstable processes can be stabilized by a controller through an analytical analysis. Finally, we propose a simple on-line process identification and autotuning method for unstable processes. Many simulation results show that, in spite of its simplicity, the proposed on-line process identification method provides good accuracy in modeling the unstable process and acceptable robustness to measurement noises and disturbances. Also, the proposed autotuner shows good control performances for both servo and regulatory problems.

• Knowledge Management Research
• /
• v.6 no.1
• /
• pp.1-17
• /
• 2005

Both knowledge management and BSC practices are in its inception in the tourism field, and the study explores the relationships between knowledge and BSC perspectives using correlations and path analysis. The purpose of this study was to explore the casual relationships among tourist destination knowledge and BSC performance perspectives. The study model added knowledge perspectives to the usual BSC model (with customer, growth and learning, internal process, and financial perspectives), in addition to the modification of the financial perspectives to economic, socio-cultual and physical impact. The study found out that knowledge supports learning and growth perspectives greatly, and less extent, internal processes and customer perspectives. Learning and growth affects internal processes and customer perspectives. Internal process supports customer perspectives. Both customer and, less extent, internal process have impact on the final results. The final analysis results were different by destination type. The study concludes with recommendations for further studies including rational BSC model for tourist destinations and relationships between BSC performance indicators.

• Journal of Korean Society on Water Environment
• /
• v.31 no.4
• /
• pp.367-376
• /
• 2015

The momentum and kinetic turbulent energy carried by the wind to a stratified lake lead to basin-scale motions, which provide a major driving force for vertical and horizontal mixing. A three-dimensional (3D) hydrodynamic model was applied to Lake Tahoe, located between California and Nevada, USA, to simulate the dominant basin-scale internal waves in the deep lake. The results demonstrated that the model well represents the temporal and vertical variations of water temperature that allows the internal waves to be energized correctly at the basin scale. Both the model and thermistor chain (TC) data identified the presence of Kelvin modes and Poincare mode internal waves. The lake was weakly stratified during the study period, and produced large amplitude (up to 60 m) of internal oscillations after several wind events and partial upwelling near the southwestern lake. The partial upwelling and followed coastal jets could be an important feature of basin-scale internal waves because they can cause re-suspension and horizontal transport of fine particles from nearshore to offshore. The internal wave dynamics can be also associated with the distributions of water quality variables such as dissolved oxygen and nutrients in the lake. Thus, the basin-scale internal waves and horizontal circulation processes need to be accurately modeled for the correct simulation of the dissolved and particulate contaminants, and biogeochemical processes in the lake.

• Educational Technology International
• /
• v.13 no.1
• /
• pp.145-173
• /
• 2012

The purpose of this study is to develop collaboration scripts as an instructional means to facilitate argumentation in computer-supported collaborative learning, and to analyze their effects. To develop collaboration scripts for argumentation, researchers used activity theory as a conceptual framework and refined the design principles by design-based research. Using LAMS, collaboration scripts for argumentation were developed based on the ArgueGraph. To examine their effects, 72 participants were divided into two groups by internal scripts and randomly allocated to one of three external scripts. Applying mixed methods, researchers analyzed argumentation competence related to the cognitive aspect, examined self-efficacy related to the motivational aspect, and identified the factors influencing collaborative learning processes and outcomes. Researchers found that the internal script is a critical factor to determine the dimensions, degrees, and duration of improvement in argumentation competence. That is, learners with higher internal scripts improved highly in the quality of single arguments, while learners with lower internal scripts improved continuously in the quality of argumentation sequences. The effects of the external scripts varied with the internal script levels and supporting periods. Besides, collaboration scripts for argumentation had positive effects on learners' self-efficacy, and learners with higher internal scripts had better self-efficacy. The factors influencing collaborative learning processes and outcomes showed different results depending on the learning context. Therefore, when scripting learner's interaction in CSCL, researchers should design the scripts adaptable to a natural context of activities.

• Journal of The Association for Neo Medicine
• /
• v.1 no.1
• /
• pp.57-89
• /
• 1996

A Typification of diagnosis and treatment(DT) model must be done in order to generalize the objective stage to the result of treatment to internal disease in connection with the type of viscera and bowel symptom. We could find 108 DT models in internal disease from the combination of 18 types of viscera and bowel and 6 types of DT treatment processes. Thus, the typification of 108 models of DT can be viewed as a modeling processes of utilizing DT knowledge at each stage. We argue that objectivity in diagnosis and treatment of internal disease can be obtained practically from typification of DT model.