• Smart Structures and Systems
• /
• v.21 no.4
• /
• pp.407-420
• /
• 2018

In structural health monitoring, it is meaningful to comprehensively utilize accelerometers and strain gauges to obtain the modal information of a structure. In this paper, a modal estimation theory is proposed, in which the displacement modes of the locations without accelerometers can be estimated by the strain modes of selected strain gauge measurements. A two-stage sensor placement method, in which strain gauges are placed together with triaxial accelerometers to obtain more structural displacement mode information, is proposed. In stage one, the initial accelerometer locations are determined through the combined use of the modal assurance criterion and the redundancy information. Due to various practical factors, however, accelerometers cannot be placed at some of the initial accelerometer locations; the displacement mode information of these locations are still in need and the locations without accelerometers are defined as estimated locations. In stage two, the displacement modes of the estimated locations are estimated based on the strain modes of the strain gauge locations, and the quality of the estimation is seen as a criterion to guide the selection of the strain gauge locations. Instead of simply placing a strain gauge at the midpoint of each beam element, the influence of different candidate strain gauge positions on the estimation of displacement modes is also studied. Finally, the modal assurance criterion is utilized to evaluate the performance of the obtained multitype sensor placement. A bridge benchmark structure is used for a numerical investigation to demonstrate the effectiveness of the proposed multitype sensor placement method.

• Korean Journal of Remote Sensing
• /
• v.36 no.4
• /
• pp.503-513
• /
• 2020

This paper presents a method to evaluate denoising filters based on edge locations in their denoised images. Image quality assessment has often been performed by using structural similarity (SSIM). However, SSIM does not provide clearly the geometric accuracy of features in denoised images. Thus, in this paper, a method to localize edge locations with subpixel accuracy based on adaptive weighting of gradients is used for obtaining the subpixel locations of edges in ground truth image, noisy images, and denoised images. Then, this paper proposes a method to evaluate the geometric accuracy of edge locations based on root mean squares error (RMSE) and jaggedness with reference to ground truth locations. Jaggedness is a measure proposed in this study to measure the stability of the distribution of edge locations. Tested denoising filters are anisotropic diffusion (AF), bilateral filter, guided filter, weighted guided filter, weighted mean of patches filter, and smoothing filter (SF). SF is a simple filter that smooths images by applying a Gaussian blurring to a noisy image. Experiments were performed with a set of simulated images and natural images. The experimental results show that AF and SF recovered edge locations more accurately than the other tested filters in terms of SSIM, RMSE, and jaggedness and that SF produced better results than AF in terms of jaggedness.

• Korean Journal of Child Studies
• /
• v.25 no.6
• /
• pp.1-13
• /
• 2004

The purposes of this study were to investigate whether there were differences in the young children's abilities to use spatial coordinates and to represent spatial locations by children's age and sex, and to examine the relationship between these two abilities. It also explored whether the young children could use coordinates as the frames of reference for representing spatial locations. Seventy 5- and 6-year-old children from two kindergartens in Seoul and in Bucheon participated in this study. Results indicated that there were statistically significant differences between age groups on the children's ability to use spatial coordinates and to represent spatial locations. However, there were no significant differences between boys and girls on these two abilities. A positive correlation was found between theses two abilities of using spatial coordinates and representing spatial locations. Most of the young children used landmarks as the frames of reference to represent spatial locations while some of the children were partially able to use spatial coordinates. Twenty percent of 6-year-old children were fully able to use spatial coordinates as the frames of reference to represent spatial locations.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.330-333
• /
• 2006

In this paper experimental tests were performed to evaluate velocities of the acoustic waves through prestressed concrete beam and source locations using AE technique. Seven AE sensors are mounted on the surface of 5m length test beam with equal spacing and using Schmidt Hammer AE events are made 18 locations. The velocities of AE signals are evaluated using the time differences of arrival times and the distances between the AE source loactions and the AE sensor locations. In addition, using the Least Square Method, the AE source locations are re-evaluated reversely using both of the arrival times and the velocities of AE signals. Test results show the average velocity of the AE signals is about 4,000m/sec and the velocity decreased with the increase of the trevalling times due to the effect of attenuation. Based on the estimation of the source locations, it is observed that the accuracy of source location is increased when the velocity of each AE sensor used rather than the average velocity.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.3
• /
• pp.187-191
• /
• 2012

The methods for constructing network of observational locations for measuring water quality in water reservoirs have been widely proposed, but they had some limitations to be applied to river areas, which lie in awkward clustering and finding representative observational locations among locations within each clustering. In this paper, a statistical approach to detect anomaly locations which were significantly different in important measurements for the water quality from the previous locations and construct observational network with them was proposed. Anomaly was detected with the sampling distribution of each primary principal component score, sum of primary PCs, or sum of residual PCs. The empirical study with the data of Nakdong Dam for guiding how to use our proposed approach and showing limitations of previous studied was described.

• Structural Engineering and Mechanics
• /
• v.5 no.6
• /
• pp.691-703
• /
• 1997

This paper investigates the optimal locations of internal point supports in a symmetric crossply laminated rectangular plate for maximum fundamental frequency of vibration. The method used for solving this optimization problem involves the Rayleigh-Ritz method for the vibration analysis and the simplex method of Nelder and Mead for the iterative search of the optimum support locations. Being a continuum method, the Rayleigh-Ritz method allows easy handling of the changing point support locations during the optimization search. Rectangular plates of various boundary conditions, aspect ratios, composed of different numbers of layers, and with one, two and three internal point supports are analysed. The interesting results on the optimal locations of the point supports showed that (a) there are multiple solutions; (b) the locations are dependent on both the plate aspect ratios and the number of layers (c) the fundamental frequency may be raised significantly with appropriate positioning of the point supports.

• Journal of Information Processing Systems
• /
• v.13 no.6
• /
• pp.1640-1651
• /
• 2017

To make an unmanned aerial vehicle (UAVs) fly in indoor environments, the indoor locations of the UAV are required. One of the approaches to calculate the locations of an UAV in indoor environments is enhanced trilateration using one Bluetooth-based beacon and three or more access points (APs). However, the locations of the UAV calculated by the common chord-based trilateration has errors due to the distance errors of the beacon measured at the multiple APs. This paper proposes a method that corrects the errors that occur in the process of applying the common chord-based trilateration to calculate the locations of an UAV. In the experiments, the results of measuring the locations using the proposed method in an indoor environment was compared and verified against the result of measuring the locations using the common chord-based trilateration. The proposed method improved the accuracy of location measurement by 81.2% compared to the common chord-based trilateration.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5A
• /
• pp.917-925
• /
• 2006

Experimental tests were performed to estimate velocities of the acoustic signals through prestressed concrete beam and source locations using acoustic emission (AE) techniques. Seven AE sensors are mounted on the surface of 5m length test beam with equal spacing and using Schmidt Hammer AE events are made at 18 locations. The velocities of AE signals are estimated using the time differences of arrival times and the distances between the source locations and the AE sensor locations. In addition, using the Least Square Method, the AE source locations are re-evaluated reversely using both of the arrival times and the velocities of AE signals. Test results show the average velocity of the AE signals is about 4,000 m/sec and the velocity decreased with the increase of the distance from source locations to AE sensors due to the effect of attenuation. Based on the estimation of the source locations, it is observed that the errors of source locations are decreased when the velocities of each AE sensor are used rather than the average velocity.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.146-150
• /
• 1989

In the pole assignment strategy, the closed loop poles are placed at prespecified locations. The amount of control effort required is to some extent proportional to the distance of the proposed closed loop locations of the poles from their open loop locations. The poor choice of closed loop locations may result in Large control effort and it may nuke the system unstable. To overcome this problem, pole shift control strategy is described in this paper. The validity of the proposed control strategy is assured through some simulations.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.2
• /
• pp.99-104
• /
• 2013

With diversity of mobile services (e.g., messenger, and social network service) on smartphone, the demand of text input using a soft keyboard is increasing. However, studies on subjective and physiological responses of users for various touch locations are lacking. The present study investigated the ergonomic effects according to touch locations of a soft keyboard on smartphone. The experiment of the present study measured perceived discomfort using Borg's CR-10 scale and electromyography (EMG) on forearm (abductor pollicis longus, and extensor digitorum communis) and thumb (abductor pollicis brevis, and first dorsal interossei) muscles. Perceived discomfort was significantly varied from 0.7 (extremely weak discomfort) to 2.5 (weak discomfort) depending on touch locations. %MVC according to touch locations was only significant at abductor pollicis brevis which varied from 10% to 23%. The experimental results of the present study can be utilized in the ergonomic design of a soft keyboard.