• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.789-794
• /
• 2001

In this study, a program for the off-design performance prediction of multi-stage axial-compressors is developed based on stage-stacking method. To account for the increased losses at off-design conditions, generalized performance curve is applied. The purpose of this study is to investigate the influence of the choice of generalized performance curve and stator exit angle. For this purpose, we tested various generalized performance curves and stator exit angles. In conclusion, Muir's pressure coefficient curve gives a good prediction results regardless of the efficiency curve for a low-stage compressors. On the other hand, for high-stage compressors, The combination of Muir's pressure coefficient curve and Stone's efficiency curve gives a optimistic results. Stator exit angle has a small effect on overall performance curve.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.37-43
• /
• 2004

The performance of magnetic abrasive finishing fur surface is evaluated by the characteristic curve. The characteristic curve is generated by experiment in surface finishing. For experiment, new magnetic inductor is designed and manufactured. 15 kinds of powders are provided to find the relationship between powder characteristic and finishing performance. As powder, Fe-TiC. Polymer-TiC and Fe-NbC are used with different size. The size of abrasives and location are also important factor for the performance. From characteristic curve, two index are obtained, which specify the initial finishing performance and endurance of finishing performance. It is proved that the performance index can be applied to select proper powder for efficient deburring. It is shown that the characteristic curve can be used as good tools for evaluating powder performance in surface finishing and deburring.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.143-148
• /
• 2001

In this study, to investigate the effect of the generalized performance curve on the performance prediction and to find the optimal ones, a systematic study is performed. For this purpose, we compared the influence of the stage performance curves with experimental data in multi-stage axial compressors. As a result, it is discovered that the optimal generalized performance curves vary according to the number of the stages in compressors. And we found that for a low-stage compressors, Muir's pressure coefficient curve gives the best prediction results at design rotational frequency regardless of the efficiency curve. On the other hand, for high-stage compressors, Stone's pressure coefficient curve gives the optimistic results about the performance prediction at design rotational frequency.

• Journal of Information Technology Services
• /
• v.11 no.3
• /
• pp.89-101
• /
• 2012

The study investigated if IT investment in Korean financial markets for the past 18 years has grown following the s-curve pattern based on Nolan's growth model in order to find the correlation between IT investment and management performance in the financial industry. According to the research finding it can be said that the overall financial markets maintain s-curve pattern, and IT investment is related to management performance, particularly increase in total assets and net profit. However, each sector has defining features of growth patterns. The banking industry has grown similarly to the s-curve, and the insurance industry also shows the s-curve but it looks more like linear pattern. In terms of securities industry, its growth patterns can hardly be considered s-curve due to the irregular changes. his research outcome illustrates the analysis of IT growth patterns in the financial industry and thus, it is expected to be a useful reference when deciding the appropriate time for IT investment in the financial industry.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.6
• /
• pp.696-702
• /
• 2015

This paper suggests a new method for making a navigation path by using Bezier curve in order to improve the navigation performance used to avoid obstacles during a robot soccer game. We analyzed the advantages and disadvantages of both vector-field and limit-cycle navigation methods, which are the mostly widely used navigation methods for avoiding obstacles. To improve the disadvantages of these methods, we propose a new design technique for generating a more proper path using Bezier curve and describe its advantages. Using computer simulations and experiments, we compare the performance of vector-field navigation with that of Bezier curve navigation. The results prove that the navigation performance using Bezier curve is relatively superior to the other method.

• Advances in concrete construction
• /
• v.10 no.6
• /
• pp.559-571
• /
• 2020

This study aimed to inspect the axial compression mechanical performance of basalt-fiber-reinforced recycled - concrete (BFRRC)-filled square steel tubular stub column. The replacement ratio of recycled coarse aggregate (RCA) and the basalt fiber (BF) dosage were used as variation parameters, and the axial compression performance tests of 15 BFRRC-filled square steel tubular stub column specimens were conducted. The failure mode and the load-displacement/strain curve of the specimen were measured. The working process of the BFRRC-filled square steel tubular stub column was divided into three stages, namely, elastic-elastoplasticity, sudden drawdown, and plasticity. The influence of the design parameters on the peak bearing capacity, energy dissipation performance, and other axial compression performance indexes was discussed. A mathematical model of segmental stiffness degradation was proposed on the basis of the degradation law of combined secant-stiffness under axial compression. The full-process curve equation of axial compressive stress-strain was proposed by introducing the influencing factors, including the RCA replacement ratio and the BF dosage, and the calculated curve agreed well with the test-measured curve.

• Journal of Information Processing Systems
• /
• v.8 no.1
• /
• pp.145-158
• /
• 2012

Hyperelliptic Curve Cryptosystem (HECC) is well suited for all kinds of embedded processor architectures, where resources such as storage, time, or power are constrained due to short operand sizes. We can construct genus 3 HECC on 54-bit finite fields in order to achieve the same security level as 160-bit ECC or 1024-bit RSA due to the algebraic structure of Hyperelliptic Curve. This paper explores various possible attacks to the discrete logarithm in the Jacobian of a Hyperelliptic Curve (HEC) and addition and doubling of the divisor using explicit formula to speed up the scalar multiplication. Our aim is to develop a cryptosystem that can sign and authenticate documents and encrypt / decrypt messages efficiently for constrained devices in wireless networks. The performance of our proposed cryptosystem is comparable with that of ECC and the security analysis shows that it can resist the major attacks in wireless networks.

• Structural Engineering and Mechanics
• /
• v.53 no.5
• /
• pp.881-896
• /
• 2015

In this study, a method for fatigue performance estimation of deepwater steel catenary riser (SCR) under short-term vortex-induced vibration was investigated for selected S-N curves. General tendency between S-N curve capacity and fatigue performance was analysed. SCRs are generally used to transport produced oil and gas or to export separated oil and gas, and are exposed to various environmental loads in terms of current, wave, wind and others. Current is closely related with VIV and it affects fatigue life of riser structures significantly. In this regards, the process of appropriate S-N curve selection was performed in the initial design stage based on the scale of fabrication-related initial imperfections such as welding, hot spot, crack, stress concentration factor, and others. To draw the general tendency, the effects of stress concentration factor (SCF), S-N curve type, current profile, and three different sizes of SCRs were considered, and the relationship between S-N curve capacity and short-term VIV fatigue performance of SCR was derived. In case of S-N curve selection, DNV (2012) guideline was adopted and four different current profiles of the Gulf of Mexico (normal condition and Hurricane condition) and Brazil (Amazon basin and Campos basin) were considered. The obtained results will be useful to select the S-N curve for deepwater SCRs and also to understand the relationship between S-N curve capacity and short-term VIV fatigue performance of deepwater SCRs.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.1326-1333
• /
• 2006

Purpose of this research is a development for the curve fitted equations that can improve practical calculation and work application when seismic performance has been evaluated and this work has been made a study of the dynamic response under various boundary conditions of buried pipelines to compare the dynamic behavior of concrete pipe and steel pipe, FRP pipe. This research have been developed curve fitted equations that can be improving efficiency and practicality. Using a nonlinear least square method, and after testing several different exponential equations, Proposed the curve fitted equations to give the best result and constant value by the propagation velocities. With these results, dynamic response analysis and seismic performance evaluation have been achieved on concrete pipe, steel pipe and FRP pipe that have a various boundary conditions. Degree of a polynomial expression and coefficient value by propagation velocity have been calculated when using the curve fitting equations.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.9 no.1
• /
• pp.85-102
• /
• 1999

In this paper, we propose an EC-SRP(Elliptic Curve - Secure Remote Password) protocol that uses ECDLP(Elliptic Curve Discrete Logarithm Problem) instead SRP protocols’s DLP. Since EC-SRP uses ECDLP, it inherits the high performance and security those are the properties of elliptic curve. And we reduced the number of elliptic curve scalar multiplication to improve EC-SRP protocol’s performance. Also we have proved BC-SRP protocol is a secure AKC(Authenticated Key Agreement with Key Confirmation) protocol in a random oracle model.