• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.1
• /
• pp.22-30
• /
• 2011

Plane detection is very important information for mission-critical of robot in 3D environment. A representative method of plane detection is Hough-transformation. Hough-transformation is robust to noise and makes the accurate plane detection possible. But it demands excessive memory and takes too much processing time. Iterative randomized Hough-transformation has been proposed to overcome these shortcomings. This method doesn't vote all data. It votes only one value of the randomly selected data into the Hough parameter space. This value calculated the value of the parameter of the shape that we want to extract. In Hough parameters space, it is possible to detect accurate plane through detection of repetitive maximum value. A common problem in these methods is that it requires too much computational cost and large number of memory space to find the distribution of mixed multiple planes in parameter space. In this paper, we detect multiple planes only via data sampling using Self Organizing Map method. It does not use conventional methods that include transforming to Hough parameter space, voting and repetitive plane extraction. And it improves the reliability of plane detection through division area searching and planarity evaluation. The proposed method is more accurate and faster than the conventional methods which is demonstrated the experiments in various conditions.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.5
• /
• pp.419-428
• /
• 2011

This paper suggests a judgement method for an inclined plane before entrance of it and the detection of obstacle position. Main idea is started from the assumption that obstacle is always on the bottom plane, and corner appears at this position. The process to detect the obstacle consists of three steps. First the 3D data using stereo matching is acquired to detect an obstacle. Second a bottom plane is extracted by using limit condition. Last the obstacle position is found by using Harris corner detection. Obstacle position detection on an inclined plane was verified by outdoor and indoor experiment. In error analysis, it is confirmed that an average error of obstacle detection in outdoor was larger than the error in indoor but the error are within about 0.030 m. This method will be applied to unmanned vehicles to navigate under various environment.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.11
• /
• pp.2086-2094
• /
• 2008

Finding a planar surface on 3D space is very important for efficient and safe operation of a mobile robot. In this paper, we propose a method using a plane detection cell (PDC) and iterative randomized Hough transform (IRHT) for finding the planar region from a 3D range image. First, the local planar region is detected by a PDC from the target area of the range image. Each plane is then segmented by analyzing the accumulated peaks from voting the local direction and position information of the local PDC in Hough space to reduce effect of noises and outliers and improve the efficiency of the HT. When segmenting each plane region, the IRHT repeatedly decreases the size of the planar region used for voting in the Hough parameter space in order to reduce the effect of noise and solve the local maxima problem in the parameter space. In general, range images have many planes of different normal directions. Hence, we first detected the largest plane region and then the remained region is again processed. Through this procedure, we can segment all planar regions of interest in the range image.

• Journal of Korea Multimedia Society
• /
• v.22 no.5
• /
• pp.580-587
• /
• 2019

In this paper, a plane detection method using depth information is proposed. 3-D characteristics of a pixel are defined as a direction and length of a normal vector whose is calculated from a plane consisting of a local region centered on the pixel. Image coordinates of each pixel are transformed to 3-D coordinates in order to obtain the local planes. Regions of each plane are detected by calculating similarity of the 3-D characteristics. The similarity of the characteristics consists of direction and distance similarities of normal vectors. If the similarity of the characteristics between two adjacent pixels is enough high, the two pixels are regarded as consisting of same plane. Simulation results show that the proposed method using the depth picture is more accurate for detecting plane areas than the conventional method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.588-591
• /
• 2004

In this paper, we propose a ground plane detection algorithm, using a new image processing method (IPD). To extract the ground plane from the color image acquired by monocular camera, we use a new identical pixel detection method (IPD) and an edge detection method. This IPD method decides whether the pixel is identical with the ground plane pixel or not. The IPD method needs the reference area and its performance depends on the reference area size. So we propose the reference area auto-expanding algorithm in accordance with situation. And we evaluated the proposed algorithm by the experiments in the various environments. From the experiments results, we know that the proposed algorithm is efficient in the real indoor environment.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.2
• /
• pp.47-55
• /
• 2019

In this paper, we propose a method for vehicle plate detection using depth information which is not influenced by illumination. The 3D camera coordinates of pixels in each block are obtained by using the depth information. Factors of the plane in the block are calculated by 3D coordinates of pixels. After that, the plane similarity between adjacent blocks is calculated by comparing between factors of planes. The adjacent blocks are grouped if the plane similarity is high so that the plane areas are detected. The actual height and width of the plane area are calculated by using depth information and compared with the vehicle plate in order to detect the vehicle plate.

• Journal of Multimedia Information System
• /
• v.6 no.3
• /
• pp.119-124
• /
• 2019

In this paper, a method of detecting vehicle plates through depth pictures is proposed. A vehicle plate can be recognized by detecting the plane areas. First, plane factors of each square block are calculated. After that, the same plane areas are grouped by comparing the neighboring blocks to whether they are similar planes. Width and height for the detected plane area are obtained. If the height and width are matched to an actual vehicle plate, the area is recognized as a vehicle plate. Simulations results show that the recognition rates for the proposed method are about 87.8%.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.10
• /
• pp.983-988
• /
• 2011

This paper presents a robust method for ground plane detection in vision-based applications based on a monocular sequence of images with a non-stationary camera. The proposed method, which is based on the reliable estimation of the homography between two frames taken from the sequence, aims at designing a practical system to detect road surface from traffic scenes. The homography is computed using a feature matching approach, which often gives rise to inaccurate matches or undesirable matches from out of the ground plane. Hence, the proposed homography estimation minimizes the effects from erroneous feature matching by the evaluation of the difference between the predicted and the observed matrices. The method is successfully demonstrated for the detection of road surface performed on experiments to fill an information void area taken place from geometric transformation applied to captured images by an in-vehicle camera system.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.9-11
• /
• 2002

We improve the free-space optical interconnection efficiency by using circular aperture computer-generated hologram (CGH). In free-space optical interconnection system using CGH, the single CGH is composed of sub-CGHs, which can change the direction of input beams to desired output positions, by Fourier transform. Each sub-CGH is rectangular shape, so the input beams through each sub-CGH are transformed to sinc functions in output plane. The side lobes of each sinc function are superimposed in output plane and they result in detection error in output plane, so the detection efficiency is low. We use the circular shaped sub-CGHs in order to reduce the side lobe value in output plane instead of rectangular shaped sub-CGHs. The each input beam is transformed to first-order Bessel functions through circular shaped sub-CGHs in output plane. The side lobes of first-order Bessel functions us low values compared with side lobes of sinc function, so we can improve the detection efficiency in output plane. We use binary phase modulated CGH, and confirm this improvement results by simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.6
• /
• pp.984-989
• /
• 2000

A microstrip patch array designed at 35 GHz is described for use in the detection of the position of moving targets. To obtain wide detection range, the array is arranged to give a narrow beamwidth in the elevation plane and a wide beamwidth on the azimuth plane. This can be achieved by aligning the electric field plane of each element to the array axis. Employing a 3 dB-tapered feed network, the array has a side lobe level of less than -20 dB and wider azimuth beam width of 12.8$^{\circ}$ simultaneously.