• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.7
• /
• pp.795-805
• /
• 2016

Nonlinear normal modes(NNMs) is a branch of periodic solution of nonlinear dynamic systems. Determination of stable periodic solution is very important in many engineering applications since the stable periodic solution can be an attractor of such nonlinear systems. Periodic solutions of nonlinear system are usually calculated by perturbation methods and numerical methods. In this study, numerical method is used in order to calculate the NNMs. Iteration of the solution is presented by multiple shooting method and continuation of solution is presented by pseudo-arclength continuation method. The stability of the NNMs is analyzed using Floquet multipliers, and bifurcation points are calculated using indirect method. Proposed analyses are applied to two nonlinear numerical models. In the first numerical model nonlinear spring-mass system is analyzed. In the second numerical model Jeffcott rotor system which has unstable equilibria is analyzed. Numerical simulation results show that the multiple shooting method can be applied to self excited system as well as the typical nonlinear system with stable equilibria.

• Journal of Radiation Protection and Research
• /
• v.26 no.1
• /
• pp.19-26
• /
• 2001

In order to assess the atmospheric dispersion for the accidental releases of nuclear power plants, in calculating X/Q values in the XOQAR and PAVAN codes which are based on Reg. Guide 1.145, the X/Q and frequency values are plotted on log-normal paper. Starting with the highest X/Q value of this plot, the codes compare the slope of the line drawn from this point to every other point within an increment containing ten X/Q values. If there are fewer than ten values, only the number available are used. The coefficients that produce the line with the least negative slope are saved. The end point of this line is used as the next starting point, from which slopes to the points within the next increment, containing ten X/Q values, are compared. The X/Q values corresponding to the cumulative frequency values 0.5%, 5% or 50% are calculated to search for the $0{\sim}2$ hour X/Q value that tends to be a very conservative value. In this work, a fuzzy logic inference method is used for nonlinear interpolation of the X/Q values versus the cumulative frequency. The fuzzy logic inference method is known to be a food technique for nonlinear interpolation. The proposed method was applied to a potential accidential radioactive release of the Yonggwang nuclear power plant, which gives more realistic X/Q values.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 1995.03a
• /
• pp.1-26
• /
• 1995

Key aspects of the Norwegian Method of Tunnelling (NMT) are reviewed. These include a predictive method of support design using the six-parameter Q-system of rock mass characterisation. The rock mass rating or Q-value is updated during tunnel driving. The designed tunnel support generally consists of wet process, steel fibre reinforced shotcrete combined with fully grouted, untensioned rock bolts, Even in poor rock conditions S(fr) + B usually acts as the final rock reinforcement and tunnel lining. Since it is a drained lining, it is very economic compared to cast concrete with membranes. Light, free-standing steel liners are used to prevent water affecting the runnel environment. Rock mass conditions, and hence lining design and cost estimation can be assessed by careful use of seismic surveys. Relationships between the P-wave velocity, the rock mass deformation modulus and the Q-value have recently been established, where tunnel depth, rock porosity and the uniaxial compression strength of the rock are important variables. The rock mass modulus estimate, and simple index testing of the joints, provide the key input which joints are discretely represented (either in two dimensions with the UDEC code or in three dimensions with the 3DEC code) is generally favoured compared to continuum analysis. The latter may give a misleading impression of uniformity and deformations tend to be understimated. Q-system NMT designs of S(fr) + B (fibre reinforced shotcrete and bolting) are numerically checked and adjustments made to bolt capacities and shotcrete thickness if overloading is evident around the modelled profile.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.1
• /
• pp.26-30
• /
• 2012

In this paper, we propose a signal generation method of rectangular QAM for rotationally invariant I/Q TCM. The proposed method consists of only digital logic gates without look-up table so that we can implement the system compactly. Our scheme can be applied to every rectangular QAM with the level higher than 64.

• East Asian mathematical journal
• /
• v.26 no.5
• /
• pp.681-691
• /
• 2010

A system of variational inclusions with (A, ${\eta}$, m)-accretive operators in real q-uniformly smooth Banach spaces is introduced. Using the resolvent operator technique associated with (A, ${\eta}$, m)-accretive operators, we prove the existence and uniqueness of solutions for this system of variational inclusions and propose a Mann type iterative algorithm for approximating the unique solution for the system of variational inclusions.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.90-92
• /
• 2001

This Paper presents a part of system study results for UPFC Pilot Plant application in Korea. The system study includes short circuit rate of Kangjin S/S which is site of UPFC Pilot Plant, ${\Delta}V/{\Delta}Q$ characteristics in STATCOM mode, P and Q flow control boundary of UPFC Pilot Plant. The system study is simulated by PSS/E Ver. 26.

• Korean Journal of Cognitive Science
• /
• v.26 no.3
• /
• pp.263-278
• /
• 2015

Online Q&A for the National Institute of the Korean Language provides expert's answers for questions about the Korean language, in which many similar questions are repeatedly posted like other Q&A boards. So, if a system automatically finds questions that are similar to a user's question, it can immediately provide users with recommendable answers to their question and prevent experts from wasting time to answer to similar questions repeatedly. In this paper, we set 5 classes of questions based on its topic which are frequently asked, and propose to classify questions to those classes. Our system searches similar questions by combining topic similarity, vector similarity and sequence similarity. Experiment shows that our method improves search correctness with topic classification. In experiment, Mean Reciprocal Rank(MRR) of our system is 0.756, and precision for the first result is 68.31% and precision for top five results is 87.32%.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.15 no.26
• /
• pp.99-109
• /
• 1992

This paper presents a cost model of the system which is managed under a continuous review (Q,r) policy at each retailer and peridic review (R,T) policy at the central warehouse. An iterative procedure is performed to find the optimal or near-optimal' solution for the policy parameters at each retailers and a central warehouse in this study.

• Journal of the Korean Professional Engineers Association
• /
• v.26 no.3
• /
• pp.26-33
• /
• 1993

위성을 이용한 DAMA-SCPC 지구국시스템의 경우 대체적으로 전송경로상에서 발생되는 에러를 제어하는 방법으로 FEC 기법을 채택하고 있다. 본 고에서는 DAMA -SCPC 지구국 시스템의 설계에 적용할 수 있도록 길쌈부호와 Viterbi 복호법, 그리고 (m-1)/m의 부호율을 위한 소기식 길쌈부호에 대해 살펴보고, 상용화 FEC CODEC 제품 중 가격이 비교적 저렴하고 다양한 기능을 제공하는 QUALCOM사의 Q0256 CODEC의 구성 및 제공 기능에 대해 분석한 후, 이 FEC CODEC을 DAMA-SCPC 지구국 시스템의 채널부에 적용시킬 때의 내장 부가 장치와 제공 기능들의 설계 및 이용 방안에 대해 고찰하였다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.3
• /
• pp.160-166
• /
• 2001

A numerical analysis has been performed for natural convection in an air conditioner duct system. The governing equations were solved a finite volume method using a SIMPLE algorithm. In the calculation mode of duct, the room temperature was preserved at $25.0^{\circ}C$ and duct wall temperature had a temperature of 15, 20.0, 22.5, 23.75, 26.25, 27.5 30 and $35^{\circ}C$. The results of velocity vectors and contours have been represented for various parameters. Based on the numerical data, the relationships between temperature difference and flow rate into room was represented. In the case of $T_\gamma>T_\omega$, the equation for temperature difference and flow rate was $Q=0.0285\triangleT^0.4005$, and in the case of $T_\gamma>T_\omega$, the equation was $Q=0.0099\triangleT^0.4752$. The duct system has an important relation to room temperature and duct wall temperature.