• Structural Engineering and Mechanics
• /
• v.53 no.4
• /
• pp.725-744
• /
• 2015

In this paper, a new damage indicator based on mode shape data is introduced to identify damage in beam structures. In order to construct the indicator proposed, the mode shape, mode shape slope and mode shape curvature of a beam before and after damage are utilized. Mode shape data of the beam are first obtained here using a finite element modeling and then the slope and curvature of mode shape are evaluated via the central finite difference method. In order to assess the robustness of the proposed indicator, two test examples including a simply supported beam and a two-span beam are considered. Numerical results demonstrate that using the proposed indicator, the location of single and multiple damage cases having different characteristics can be accurately determined. Moreover, the indicator shows a better performance when compared with a well-known indicator found in the literature.

• Smart Structures and Systems
• /
• v.32 no.1
• /
• pp.1-7
• /
• 2023

In modal analysis, the mode shape reflects the vibration characteristics of the structure, and thus it is widely performed for finite element model updating and structural health monitoring. Generally, the acceleration-based mode shape is suitable to express the characteristics of structures for the translational vibration; however, it is difficult to represent the rotational mode at boundary conditions. A tilt sensor and gyroscope capable of measuring rotational mode are used to analyze the overall behavior of the structure, but extracting its mode shape is the major challenge under the small vibration always. Herein, we conducted a feasibility study on a multi-mode shape estimating approach utilizing a single physical quantity signal. The basic concept of the proposed method is to receive multi-metric dynamic responses from two sensors and obtain mode shapes through bridge loading test with relatively large deformation. In addition, the linear transformation matrix for estimating two mode shapes is derived, and the mode shape based on the gyro sensor data is obtained by acceleration response using ambient vibration. Because the structure's behavior with respect to translational and rotational mode can be confirmed, the proposed method can obtain the total response of the structure considering boundary conditions. To verify the feasibility of the proposed method, we pre-measured dynamic data acquired from five accelerometers and five gyro sensors in a lab-scale test considering bridge structures, and obtained a linear transformation matrix for estimating the multi-mode shapes. In addition, the mode shapes for two physical quantities could be extracted by using only the acceleration data. Finally, the mode shapes estimated by the proposed method were compared with the mode shapes obtained from the two sensors. This study confirmed the applicability of the multi-mode shape estimation approach for accurate damage assessment using multi-dimensional mode shapes of bridge structures, and can be used to evaluate the behavior of structures under ambient vibration.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.4
• /
• pp.188-193
• /
• 2003

This paper describes a novel burst-mode clock and data recovery (CDR) circuit which can be used for 622Mbps burst mode applications. The CDR circuit is basically a phase locked loop (PLL) having two phase detectors (PDs), one for the reference clock and the other for the NRZ data, whose operations are controlled by an external control signal. This CDR was fabricated in a 1-poly 5-metal $0.25{\;}\mu\textrm{m}$ CMOS technology. Jitter generation, burst/continuous mode data receptions were tested. Operational frequency range is 320Mhz~720Mhz and BER is less than 1e-12 for PRBS31 at 622Mhz. For the same data sequence, the extracted clock jitter is less than 8ps rms. Power consumption of 100mW was measured without I/O circuits.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.1105-1108
• /
• 1999

In this paper, we propose a new addressing mode, which can be used for programmable image processor to perform image- processing algorithms effectively. Conventional addressing modes are suitable for one-dimensional data processing such as voice, but the proposed addressing mode consider two-dimensional characteristics of image data. The proposed instruction for two-dimensional addressing requires two operands to specify a pixel and doesn't require any change of memory architecture. Combining several instructions to load a pixel-data from an external memory to a register, the proposed instruction reduces code size so that satisfy hish performance and low power requirements of image processor. In addition, it uses inherent two-dimensional characteristics of image data and offers user-friendly instruction to assembler programmer.

• Smart Structures and Systems
• /
• v.11 no.6
• /
• pp.569-587
• /
• 2013

This paper evaluates the closed loop performance of the reaching law based discrete sliding mode controller with multisensor data fusion (MSDF) in real time, by controlling the first two vibrating modes of a piezo actuated structure. The vibration is measured using two homogeneous piezo sensors. The states estimated from sensors output are fused. Four fusion algorithms are considered, whose output is used to control the structural vibration. The controller is designed using a model identified through linear Recursive Least Square (RLS) method, based on ARX model. Improved vibration suppression is achieved with fused data as compared to single sensor. The experimental evaluation of the closed loop performance of sliding mode controller with data fusion applied to piezo actuated structure is the contribution in this work.

• Structural Monitoring and Maintenance
• /
• v.5 no.3
• /
• pp.379-390
• /
• 2018

In this paper, a novel and effective damage diagnosis algorithm is proposed to detect and estimate damage using two stages least squares support vector machine (LS-SVM) and limited number of attached sensors on structures. In the first stage, LS-SVM1 is used to predict the unmeasured mode shapes data based on limited measured modal data and in the second stage, LS-SVM2 is used to predicting the damage location and severity using the complete modal data from the first-stage LS-SVM1. The presented methods are applied to a three story irregular frame and cantilever plate. To investigate the noise effects and modeling errors, two uncertainty levels have been considered. Moreover, the performance of the proposed methods has been verified through using experimental modal data of a mass-stiffness system. The obtained damage identification results show the suitable performance of the proposed damage identification method for structures in spite of different uncertainty levels.

• Journal of Korean Academy of Nursing
• /
• v.33 no.5
• /
• pp.538-543
• /
• 2003

Purpose: The purpose of this study was to identify the stress and the coping methodes in the cancer patients and their caregivers. Method: The stress method was measured by V AS(Visual Analogue Scale). The coping methodes was measured using the modified Ways of Coping Questionnaire. The phases of patient illness consisted of Ist(initial) stage, and 2nd(recurred) stage and 3rd(terminal) stage based on Lewandowski & Jones(1988) method. The data were collected by a survey of convenience sampling of 257 cancer patients and 196 of their caregivers from two hospitals in Seoul. The data were analyzed using paired t-test, unpaired t-test. Result: The stress level of cancer patients was lower than their caregivers. The cancer patients used emotion-focused coping mode than problem-focused coping mode. The caregivers problem-focused coping mode over emotion-focused coping mode. In the problem-focused coping mode, the caregivers significantly used two coping strategies that were ‘positve cope’, ‘information seeking’ more than patients. In emotion-focused coping mode, the caregivers significantly used one coping strategies that was ‘wish’ more than patients. The patients tended to used two coping strategies that were ‘blame’ and ‘emotion expression’ more than the caregivers. Conclusion: Further study needs to be done to positively identify these coping methods and develop interventions to assist patients and their caregivers.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.5
• /
• pp.486-497
• /
• 2001

In this paper, we propose a new addressing mode, which can be used for programmable image processor to perform image-processing algorithms effectively. Conventional addressing modes are suitable for one-dimensional data processing such as voice, but the proposed addressing mode consider two-dimensional characteristics of image data. The proposed instruction for two-dimensional addressing requires two operands to specify a pixel and doesn't require any change of memory architecture. The proposed two-dimensional addressing mode for image processor has the following advantages. The proposed instruction combines several instructions to load a pixel data from an external memory to a register. Hence, the proposed instruction reduces required code size so that it satisfies high performance and low power requirements of image processor. In addition, it uses inherent two-dimensional characteristics of image data and offers user-friendly instruction to assembler programmer The proposed two-dimensional addressing mode is applicable to DSP, media processor, graphic device, and so on. In this paper, we propose a new concept of two-dimensional addressing mode and an efficient hardware implementation method of it.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.52.3-52
• /
• 2002

Natural frequencies and mode shapes are two important modal data which specify the system. If the real system and FE model don't have the same local physical parameters, there will be a difference between modal data from real system and FE model. Because there is little difference in displacement mode shapes measured by an accelerometer, displacement modal update based on mode shapes including measurement errors may not be successful. In this research, strain mode shapes are used as modal data because the strain mode shapes measured by strain gauges are more sensitive than the displacement mode shapes with respect to the change of the parameters concerned in FE stiffness matrix...

• Journal of Industrial Technology
• /
• v.32 no.A
• /
• pp.3-8
• /
• 2012

In IEEE 802.16j standard document, two modes about usage of RS are proposed; one is transparent mode to enhance data throughput and the other is non-transparent mode to extend coverage. In this paper, we focus on non-transparent mode and find that the mode also affects data throughput. We analyze data throughput on various RS topology and their extended coverage area in non-transparent mode. From the analysis, we see that higher throughput can be obtained when MR-BS and RS are located distantly.