• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.30-34
• /
• 1999

Photolysis behavoirs of pesticides(Chlorothalonil and Endosulfan) over UV irradiation UV irradiation with pH 3.0 and irradiation with 3.5% salt were studied. The analyses of pesticides were carried out using gas chromatograph with an electron-capture detector, total organic carbon, and Ion chromatograph, respectively. The reactions were conducted in a alumium annular reactor equipped with a low pressure mercury multilamp ($8W{\times}6$) and initial concentration was 10 ppm. Chlorothalonil was almost photodegraded by UV irradiation, UV irradiation with pH 3.0 and 3.5% salt within 30 min of reaction time. Endosulfan-${\alpha}$,${\beta}$(100%) were photodegraded to 38% of Endosulfan-${\alpha}$ and 25% of Endisulfan-${\beta}$ by UV irradiation. Endosulfan-${\alpha}$(83%) was photodegraded to 66% by UV irradiation, 70% by UV irradiation and pH 3.0 and 75% by UV irradiation and 3.5% salt. Endosulfan-${\beta}$(16%) was photodegraded to 80% by UV irradiation, 98% by UV irradiation and pH 3.0 and 90% by UV irradiation and 3.5% salt.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.177-180
• /
• 2000

We studied the degradation of EVA for the protection of solar cell by UV-rays irradiation. We investigated the reduction of electrical efficiency, photo transmmitance and degradation of EVA by UV-rays irradiation. We utilized the UV irradiation equiped with fluorescent 313nm UV lamp and radiated for 400 hours. For the chemial analysis, we used the UV-vis spectrometer, XPS and examined the degradation mechanism by UV irradiation. It is found that the discolored phenomena, the decrease of photo transmmitance and oxidation reaction is occured by UV irradiation on the EVA sample for the protection of solar cell.

• Journal of the Korea Furniture Society
• /
• v.26 no.4
• /
• pp.428-434
• /
• 2015

In this study, we received each wood plastic composites (WPC) from three manufacturers. These WPCs were evaluated regarding their physical and mechanical properties of both before and after accelerated weathering by ultraviolet (UV) irradiation. The total time of exposure of the WPCs to UV irradiation was 1800 h. The water absorption, volumetric swelling and shrinkage of WPCs did not affected by UV irradiation. Among the mechanical properties, there was no significant differences in bending strength and screw withdrawal resistance of UV treated WPCs compared with those of reference WPCs. However, surface hardness of WPCs showed decrease under UV irradiation. Stereoscopic microscopy observation revealed deterioration of the surface layer polymer in all weathered WPCs by UV. Exposure of the WPCs to UV irradiation caused decomposition and disappearance of the polymer layer. From this result, we can estimate that damage of polymer by UV led to a decrease in the surface hardness of the WPCs. The wood flours retained original shape after accelerated weathering by UV irradiation.

• Korean Journal of Human Ecology
• /
• v.20 no.5
• /
• pp.1009-1023
• /
• 2011

This study was carried out to investigate the variations of catechu dyed fabrics under UV irradiation. Catechu dyed cotton and silk fabrics mordanted with Fe and Cu were irradiated with UV under dry and wet conditions, and then were evaluated on color changes and mechanical properties. Owing to UV irradiation, the K/S values of catechu dyed cotton fabrics increased until a certain amount of time but those of catechu-dyed silk fabrics increased continuously. Cu mordanting cotton fabrics showed the smallest changes due to the UV treatment, and silk fabrics mordanted with Fe showed the largest changes. Wetted fabrics were accelerated maillard browning by UV. Un-mordanted cotton fabrics treated with UV under dry conditions changed its YR color to Y, but changed its Y color to YR under wet conditions. However, mordanted cotton fabrics treated with UV didn't change their color. Dyed silk fabrics except those Fe mordanted and in wet conditions continued to keep their color after UV irradiation. Silk fabric mordanted with Fe under wet conditions changed its Y color to YR by UV irradiation. UV irradiation didn't affect the mechanical properties of catechu-dyed cotton and silk fabrics in any significant way.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.1 s.18
• /
• pp.65-69
• /
• 2007

A design of experiments was applied in order to investigate the effect of processing variables in UV irradiation on the electrical/optical properties in indium-zinc oxide thin films, The processing variables, equivalently input variables are listed as UV irradiation time, oxygen flow rate, and chamber pressure. The statistical significance of Ultra Violet (UV) treatment was confirmed using a paired-t test. The full factorial $2^3$ design was employed to determine significant main and interaction effects in UV irradiation process. The chamber pressure and the interaction between UV irradiation time and $O_2$ flow rate were found to be statistically significant at the significance level of 0.1. Furthermore, the optimized approach was proposed in achieving the improved conductivity after UV irradiation.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.28-32
• /
• 1998

Two organophosphorous insecticides, Dichlorovos and Chloropyrifos were degraded in the presence of UV irradiation, UV irradiation with $TiO_2$ powder and UV irradiation with sea sand using low pressure mercury lamp. The identification of these compounds was carried out by gas chromatograph with a nitrogen-phosphorous detector, Total Organic Carbon and Ion Chromatograph, respectively. Both dichlorvos and chloropyrifos, UV irradiation with sea sand were more degradable than UV irradiation and UV irradiation with $TiO_2$ powder. The final products were $Cl^-$ in Dichlorvos, $Cl^-$ $SO_4{^{2-}}$ in Chloropyrifos, respectively.

• Food Science and Preservation
• /
• v.20 no.1
• /
• pp.45-51
• /
• 2013

This study was conducted to evaluate the changes in the quality of rice wine (Makgeolli) treated with UV-C and electron beam (EB) irradiation during its storage at $4^{\circ}C$ for 15 days. The EB irradiation was found to be more effective than the UV-C irradiation for microbiological control. The pH tended to be increased by UV-C, EB irradiation, and storage period. Acidity was significantly higher in rice wine treated with EB irradiation than those of control and UV-C irradiation during storage period. The $L^*$-value of the samples treated with UV-C and EB irradiation tended to be proportionately higher than that of the control, but this was not consistent during storage period. The $a^*$-value of the sample treated with EB was higher than that of the others, but this was not consistent during the storage period. The reducing sugar content was higher in the control at day 0, but it rapidly decreased compared with the control during the storage. The results indicate that EB irradiation was more effective than UV-C irradiation in controlling microorganisms of rice wine. However, a further study is needed to minimize the rice wine quality deterioration caused by UV-C or EB irradiation during storage.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.12 no.1
• /
• pp.75-80
• /
• 1999

In this study, we have investigated the relationship between the generation of pretilt angle and the polarization component in cells with UV light irradiation on polyimide (PI) surface. It was found that the generated pretilt angle is about $1.4^{\circ}$ with S-polarized UV light irradiation of $75^{\circ}$ on PI surface; it may be attributed to the asymmetry triangular of polymer surface with oblique S-polarized UV light irradiation on PI surface. Also, we measured that the generated pretilt angle is about $2.0^{\circ}$ with oblique P polarized UV light irradiation of $75^{\circ}$ on PI surface. Consequently, we suggest that the generated pretilt angle of the NLC is attributed to the interaction between the LC molecules and the polymer surface with oblique polarized UV light irradiation on PI surface.

• Textile Coloration and Finishing
• /
• v.13 no.4
• /
• pp.256-263
• /
• 2001

Polyester fabrics were irradiated by UV produced by the low pressure mercury lamp. UV irradiation broke a C-H bond of PET fiber and caused the carbonyl groups on the fiber surfaces. Surface modification of PET fibers were accelerated by pretreatment with methanol, ethanol and acetone. The irradiated PET was dyed with basic dyes having cationic groups. The dye uptakes were proportional to irradiation times, and in inversely proportional to irradiation distances. The tensile strengths of PET fabrics decreased by UV irradiation. Washing fastness of PET dyeings were good, about 4-5 grade,andlightfastnesswerepoor, about l grade.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.5
• /
• pp.755-761
• /
• 2006

Recently, there is growing interest in ultraviolet (UV) irradiation as a disinfection technic in drinking water production due to its effectiveness to inactivate microorganisms such as Crytosporidium parvum without forming disinfection byproducts. However, UV disinfection is known for its drawback such as photoreactivation. Despite many works concerning the photoreactivation, most of works were focused on indicator or non pathogenic microorganisms. The objective of this study is to examine the photoreactivation of Pseudomonas aeruginosa which is an opportunistic pathogen as UV radiation by LP and MP UV lamp was applied. The result showed that P. aeruginosa had high photo repair efficiency regardless of the type of UV irradiation. Both of the effective log repair values of LP and MP UV irradiation were found approximately 2.6 log. In addition, photo repaired P. aeruginosa was not significantly different in forming biofilm in comparison with non treated P. aeruginosa.