• Journal of Radiation Protection and Research
• /
• v.28 no.4
• /
• pp.337-342
• /
• 2003

On a basis of the washout model and concentrations of anthropogenic tritium in rainwater around the Wolsong site, the washout coefficients of tritium by rainwater were calculated, and the validity of washout deposition model are estimated. As the result of that, the washout coefficients in 10 sampling stations around Wolsong site were in the range of $2.9{\times}10^{-5}\;-\;16{\times}10^{-5}\;s^{-1}$ with the mean value of $7.21{\times}10^{-5}\;s^{-1}$. The validity of the washout deposition model was confirmed by comparing the observed data with the calculated ones.

• Journal of Mechanical Science and Technology
• /
• v.17 no.2
• /
• pp.221-229
• /
• 2003

In the virtual environment, reality can be enhanced by offering the motion based on a motion simulator in harmony with visual and auditory modalities. In this research the Stewart-Gough-platform-based motion simulator has been developed. Implementation of vehicle dynamics is necessary in the motion simulator for realistic sense of motion, so bicycle dynamics is adopted in this research. In order to compensate for the limited range of the motion simulator compared with the real vehicle motion, washout algorithm composed of high-pass filter, low-pass filter and tilt coordination is usually employed. Generally, the washout algorithm is used with fixed parameters. In this research a new approach is proposed to tune the filter parameters based on fuzzy logic in real-time. The cutoff frequencies of the filters are adjusted according to the workspace margins and driving conditions. It is shown that the washout filter with the fuzzy-based parameters presents better performance than that with the fixed ones.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.6
• /
• pp.519-528
• /
• 2004

For reappearance of driving perception in a driving simulator, a washout algorithm is required. This algorithm can reappear the vehicle driving motions within workspace of the driving simulator. However classical washout algorithm contains several problems such as selection of order, cut-off frequency of filters, generation of wrong motion cues by characteristics of filters, etc. In order to overcome these problems, this paper proposes a new washout algorithm which gives more accurate sensations to drivers. The algorithm consists of an artificial inclination of the motion plate and human perception model with band pass filter and dead zone. As a result of this study, the motion of a real car could be reappeared satisfactorily in the driving simulator and the workspace of motion plate is restrained without scaling factor.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.5 s.98
• /
• pp.19-28
• /
• 1999

In this study, a real-time simulation system and a washout algorithm for an excavator have been developed for a driving simulator with six degrees of freedom. The excavator model consisting of a boom. bucket, upper frame, lower frame and four wheels, has total 11 degrees of freedom. The suggested washout algorithm consists of high and low pass filters with second order. The high pass filters cut off low frequency of the motion cues limited by platform motion. The cut off frequency for the tilt coordination are suggested for a realistic regeneration of excavator motion.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.E2
• /
• pp.97-106
• /
• 2002

The purpose of this study was to quantitatively estimate the washout removal efficiencies of criteria air pollutants such as SO$_2$, TSP, PM10, CO, NO$_2$, and O$_3$corresponding to the amounts and durations of precipitation. The removal patters by washout were studied with air pollutants data and the corresponding precipitation data in Seoul, Korea during the periods of 1990 to 1999. In addition, washout patterns were classified into four seasons and four time Bones, i.e., night, morning, afternoon, and evening. In this study, natures of air pollutants by sequential precipitation were also intensively studied by examining the linear relationships between removal efficiencies and the amounts and durations of precipitation for each pollutant. The results of this study showed that SO$_2$, TSP, and O$_3$were rapidly removed by initial precipitation; however, NO$_2$was slowly removed 2-hour after precipitation. Both CO and PM10 were weakly removed by washout and their removal patters showed to be irregular.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.7
• /
• pp.634-642
• /
• 2004

Unlike actual vehicles, a vehicle driving simulator is limited in kinematic workspace and bounded on dynamic characteristics. So it is difficult to simulate dynamic motions of a multi-body vehicle model. In order to overcome these problems, a washout algorithm which controls the workspace of the simulator within the kinematic limitation is needed. However, a classical washout algorithm contains several problems such as generation of wrong sensation of motions by filters in tilt coordination, requirement of trial and error method in selecting the proper cut-off frequencies, difficulty in returning the simulator to its origin using only high pass filters and etc. This paper proposes a new tilt coordination method as an algorithm which gives more accurate sensations to drivers. In order to reduce time for returning the simulator to its origin, a new washout algorithm that the proposed algorithm selectively onset mode from high pass filters and return mode from error functions is proposed. As a result of this study, the results of the proposed algorithm are compared with the results of classical washout algorithm through the human perception models. Also, the performance of the suggested algorithm is evaluated by using human perception and sensibility of some drivers through experiments.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.8
• /
• pp.823-830
• /
• 2009

For developing automotive parts and telematics devices the real car test often shows limitation because it needs high cost, much time and has the possibility of the accident. Therefore, a Vehicle Driving Simulator (VDS) instead of the real-car test has been used by some automotive manufactures, research centers, and universities. The VDS is a virtual reality device which makes a human being feel as if one drives a vehicle actually. Unlike actual vehicle, the simulator has limited kinematic workspace and bounded dynamic characteristics. So it is difficult to simulate dynamic motions of a multi-body vehicle model fully. In order to overcome these problems, a washout algorithm which restricts workspace of the simulator within the kinematic limits is needed, and analysis of dynamic characteristics is required also. However, a classical washout algorithm contains several problems such as time delay and generation of wrong motion signal caused by characteristics of filters. Specially, the classical washout algorithm has the simulator sickness when driver hardly turns brakes and accelerates the VDS. In this paper, a new washout algorithm is developed to enhance the motion sensitivity and improve the simulator sickness by using the vehicle tilt signal which is generated in the real time vehicle dynamic model.

• Journal of Mechanical Science and Technology
• /
• v.19 no.spc1
• /
• pp.272-282
• /
• 2005

A vehicle driving simulator is a virtual reality device which makes a man feel as if he drove an actual vehicle. Unlike actual vehicles, the simulator has limited kinematical workspace and bounded dynamic characteristics. So it is difficult to simulate dynamic motions of a multi-body vehicle model. In order to overcome these problems, a washout algorithm which controls the workspace of the simulator within the kinematical limitation is needed. However, a classical washout algorithm contains several problems such as generation of wrong sensation of motions by filters in tilt coordination, requirement of trial and error method in selecting the proper cut-off frequencies and difficulty in returning the simulator to its origin using only high pass filters. This paper proposes a washout algorithm with new tilt coordination method which gives more accurate sensations to drivers. To reduce the time in returning the simulator to its origin, an algorithm that applies selectively onset mode from high pass filters and return mode from error functions is proposed. As a result of this study, the results of the proposed algorithm are compared with the results of classical washout algorithm through the human perception models. Also, the performance of the suggested algorithm is evaluated by using human perception and sensibility of some drivers through experiments.

• Explosives and Blasting
• /
• v.38 no.4
• /
• pp.46-52
• /
• 2020

Although anti-washout grouts are used extensively in underwater targets, major constraints continue to be associated with their use. These include poor bonding strength, poor pumpability, and loss of high strength in everyday engineering applications. In this study, based on the literature pertaining to self-compacted, non-dispersive, anti-washout grouts, a review of research trends in anti-washout grouts for underwater construction and sealing of karst cavities was carried out in order to determine the problems faced in this field. Grouts used under water suffer a loss of strength and bonding strength in comparison to grouts cast in air. Researchers are designing high-viscosity grouts to overcome the inrush of water and seal karst cavities; however, in doing so, they have inadvertently caused serious problems pertaining to the pumpability of these grouts and concretes in deep target locations. Thus, the majority of the anti-washout grouts and concretes that have been developed are not applicable to deep target environments, instead being suitable for only near-surface targets.

• Restorative Dentistry and Endodontics
• /
• v.38 no.4
• /
• pp.248-252
• /
• 2013

Objectives: Fast-setting pozzolan cement (Endocem, Maruchi) was recently developed. The aim of this study was to investigate the effects of various root canal irrigants on the washout of Endocem in comparison to the previously marketed mineral trioxide aggregate (ProRoot; Dentsply) in a furcal perforation model. Materials and Methods: ProRoot and Endocem were placed into acrylic molds on moist Oasis. Each mold was then immediately exposed to either physiologic saline, 2.5% sodium hypochlorite (NaOCl), or 2% chlorhexidine (CHX) under gentle shaking for five minutes. Washout testing was performed by scoring scanning electron microscope (SEM) images. Results: Endocem exhibited higher washout resistance compared to ProRoot, especially in the NaOCl group. Conclusions: These results suggest that Endocem can be considered a useful repair material for furcal perforation, especially in a single-visit scenario.