• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.421-426
• /
• 1999

수중 프로펠러의 비공동 소음을 Ffowcs William-Hawkings 형태의 음향 상사 방정식을 시간영역에서 해석하였으며 전산공력음향학(CAA)과 경계 요소법(BIEM)등 수치적 방법을 통해 해석하였다. 덕트 없는 프로펠러와 덕트 프로펠러에 대해서 비균일 유입류 조건에 대해서 소음 강도와 방향성을 예측하였으며 이는 수중 프로펠러의 운용시 지배적인 소음원을 구별하고 그 특성을 파악하여 적절한 소음 제어 책을 마련하는 기반이 될 것이다.

• Journal of computational fluids engineering
• /
• v.18 no.1
• /
• pp.22-27
• /
• 2013

Researches in the area of aeroacoustics have been conducted by two methods. In the first method theoretical formula or experimentation are utilized, and in the second method flow field analysis and acoustic analogy are utilized. In contrast to the first method, the second method does not need new experiments for every individual change of flow configurations and conditions, and it can predict their effects by the flow field analysis, which makes the second method preferred than the first one. In this paper numerical analysis to predict noise generated by a turbulent flow about a two dimensional circular cylinder by use of CAA (Computational Aeroacoustics) method is conducted and the results are compared to the available experimental data.

• Journal of the Korean Society of Visualization
• /
• v.2 no.2
• /
• pp.3-7
• /
• 2004

In this paper, computational aeroacoustics (CAA) method is used for flow-noise analysis and flow-noise visualization. High order high resolution scheme of optimized high order compact is used to resolve the small acoustic quantities and large flow quantities at the same time. An adaptive nonlinear artificial dissipation model and generalized characteristic boundary condition are also used. Aeolion tone noise, cavity noise, and jet noise are investigated. The visualizations of flow-noise are successful and characteristics of noise are studied. It is observed that the propagation directivity of noise is different with that of flow. With the help of CAA method, the visualization of noise is possible.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.247-250
• /
• 2000

본 논문에서는 최근 공력소음 및 소음제어 분야의 연구 동향을 정리하고, 이에 대한 미래의 가능성을 진단해 본다. 공력소음공학은 학문적 관심과 실용적 응용성을 동시에 만족시키면서, 이러한 목적을 달성하기 위해 수치적 혹은 실험적인 여러 가지 방법들을 다양하게 채용하고 있는 학제적 (interdisciplinary) 연구 분야이다. 자동차 냉각팬 소음, 헬리콥터 소음, HRSG 소음, 고속 철도 소음, 원심 압축기 소음, 수중 추진기 소음, 전산공력음향학, 능동 소음 제어, 충격파-와동 간섭 소음 등 현재 연구되어지고 있는 문제들을 간략하게 조명하면서, 환경 과학과 인간 공학으로서의 이 분야가 지닌 미래의 무한한 잠재력을 고찰한다.

• 한국전산유체공학회:학술대회논문집
• /
• 2000.05a
• /
• pp.1-13
• /
• 2000

This paper presents a review of the methodology, problems and progress in computational aeroacoustics(CAA). The nature, characteristics, and objectives of aeroacoustics problems are quite different from the commonly encountered CFD problems. In this paper, computational methods that are designed especially for CAA applications are introduced. The potential offered by CAA, the numerical issues which need to be given careful attention, and some of the recent progress in solving aeroacoustic problem are discussed

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.2
• /
• pp.115-124
• /
• 2015

A methodology is proposed to estimate a trajectory of a flying target and its velocity using the time and frequency analysis of the acoustic signal. The measurement of sound emitted from a flying acoustic source with a microphone above a ground shall receive both direct and ground-reflected sound waves. For certain frequency contents, the destructive interference happens in received signal waveform reflected path lengths are in multiple integers of direct path length. This phenomenon is referred to as the acoustical mirror effect and it can be observed in a spectrogram plot. The spectrogram of acoustic measurement for a flying vehicle measurement shows several orders of destructive interference curves. The first or second order of curve is used to find the best approximate path by using nonlinear least-square method. Simulated acoustic signal is generated for the condition of known geometric of a sensor and a source in flight. The estimation based on cepstrogram analysis provides more accurate estimate than spectrogram.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.167-170
• /
• 2004

본 논문에서는 수중익 버블 캐비테이션과 날개 끝 볼텍스 캐비테이션의 거동 및 소음을 Eulerian-Lagrangian 기법을 이용하여 수치적으로 해석하였다. Eulerian-Lagrangian 기법은 캐비테이션 버블이 유동장에 미치는 영향이 거의 없다는 가정하에 유동장과 캐비테이션 거동을 일방으로 연계하여 해석하는 방식이다. 수중익 버블 캐비테이션 해석을 위한 유동장은 비압축성 RAMS 방정식을 해석하여 구하고 날개 끝 볼텍스 캐비테이션 유동장은 일반적 CFD 기법의 큰 수치 소산으로 그 특성이 잘 나타나지 않으므로 Sculley 볼텍스 모델을 이용하여 해석한다. 해석한 유동장 정보를 입력치로 하고 버블의 지배 방정식인 Rayleigh-Plesset 방정식과 Newton의 제2법칙에 근거한 궤적 방정식을 연계하여 캐비테이션의 성장-붕괴와 운동을 예측한다. 계산된 거동 정보를 이용하여 버블 캐비테이션과 날개 끝 볼텍스 캐비테이션의 소음을 예측하였다. 본 연구는 수중 운동체에서 발생하는 캐비테이션의 거동과 소음의 특성을 파악하고 그에 따른 대비책을 마련하는 기본 연구로서 활용할 수 있을 것이다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.2
• /
• pp.83-91
• /
• 2003

Pantograph design Process must be considered in terms of stability of aerodynamics and reduction of aeroacoustics. Furthermore pantograph needs to be insensible to severe circumstance condition like typhoon, tunnel, a change of season. In this paper, robust design of panhead sections is conducted based on the Taguchi's design of experiment method. In the aeroacoustic noise analysis, an acoustic analogy using the Ffowcs Williams and Hawkings(FW-H) equation is used to calculate the flow induced sound pressure level in aeroacoustics. From the near-field CFD analysis data, the far-field noise is predicted at the positions of 25 m away from Pantograph. Based on aerodynamic(CFD) and aeroacoustic(FW-H) analysis data, the optimal sizing and Positioning of panhead elements are determined using robust design optimization method. Design parameters such as thickness, length and radius are controllable factors, while outdoor air temperature and atmospheric pressure are considered as uncontrollable factors in the context of Taguchi's approach. A number of CFD simulation and aeroacoustic analysis are performed based on orthogonal arrays. In this paper, two-step optimization method is used as a parameter design procedure. It is executed using signal to noise(S/N) ratio and analysis of means(ANOM) method. So Thus, an optimal level of design parameters Is extracted to minimize the disconnection ration between contact strips and catenary system, and reduce the far-field aeroacoustic noise.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.29-36
• /
• 1998

• 한국전산유체공학회:학술대회논문집
• /
• 2006.05a
• /
• pp.63-65
• /
• 2006