• Korean journal of aerospace and environmental medicine
• /
• v.30 no.1
• /
• pp.40-49
• /
• 2020

In accordance with ICAO SARPs, the states should implement appropriate aviation-related health promotion for airmen subject to an aviation medical examination to reduce future medical risks to flight safety. We aimed to analyze the results of the aviation medical examination to use as objective evidence for establishing an aviationrelated health promotion plan. The results of the final issuance of airmen medical certificate from 2015~2017 were collected from the e-sky computer system. The 30 cases (0.3%) in 2015, 22 cases (0.2%) in 2016, 38 cases (0.3%) in 2017 were unfit for flight duty. The 34 unfit out of the total 90 cases were renewal physical examinations. The cardiovascular disease was most commonly in 11 cases, followed by 8 tumors, 4 psychiatric diseases, 3 ophthalmic diseases, 2 respiratory diseases, 2 neurologic diseases, 2 otolaryngological diseases, 1 endocrine disease and 1 digestive disease. The results of this study can be used as objective data in aviation-related health promotion plan. The health promotion activities based on objective data can contribute to improving aviation safety by improving the lifestyles of airmen.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.13 no.3
• /
• pp.43-60
• /
• 2005

In september 2004, a new pilot certificate scheme referred to as Sport Pilot Certificate was declared official and standardized in the US. The designation of Light-sport aircraft and the details of the relevant pilot certificate policy was announced out of the perception that a new regulation is required to be applied whereby the limitations on the manufacturing process enhancements and current aviation rules are considered the triggering factors. US Federal Aviation Regulation retains a comprehensive range of airworthiness certificates and aircrafts are managed systematically in accordance with FAR 21, 103. The airworthiness are further segregated into sub categories, which allows differentiated management. Korean Aviation Law classify aircraft into five different categories and powered air vehicle that weighs more than 150kg(19liters fuel capacity) for one seat, 225kg for two seats(38liters fuel capacity) while the systems that fall under a specific mass threshold level are known as ultralight vehicle. The research discusses the policy of the sport pilot certificate and the light-sport aircraft ratings announced official by the Federal Aviation Administration in an intuitive fashion with the analysis of the operations providing the evidence as to the viability of adopting the policy in local grounds. Based on the findings, the report discusses the case for introducing the light-sport aircraft and make recommendation on a strategy of applying the policy in Korea with respect to the pilot certificates, safety agenda, and the written test for the pilot certificate, and operating efficiency.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.2
• /
• pp.112-121
• /
• 2010

With the global climate changes, a global concerns on building energy uses and $CO_2$ emission to improve the environment friendly has been increasingly growing. To achieve this global goal, the Korea government has been seeking an environment-friendly and sustainable development. As the results, the government started Green Building Certification Criteria system. however the certificate system has still been at the basic stage. To upgrade and advance it's level, it's necessary to identify the current status. This study aims to pick out the items requiring improvement for the Ecology of Education Facilities. We expect that the results of this study will be helpful for the next design works of certificate system.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.783-788
• /
• 2005

This document provides the concerning information of the MEPC Committee and DE sub-Committee of International Maritime Organization in accordance with enforcement of an International Air Pollution Prevention Certificate at May 19 2005years.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.2
• /
• pp.57-62
• /
• 2015

As the issuance of type certificate and production certificate for KC-100 Naraon, Korea is ranked as the State of Design and the State of Manufacture for civil aircraft specified in the Convention on International Civil Aviation. It means that another responsibilities are imposed and new frameworks are required for the airworthiness management including the continuing airworthiness. So far the minimum airworthiness management system was sufficient as the State of Registry for the aircraft operations and safety management. However, we need to establish and maintain the airworthiness management system for the effective certification and oversight of our air operators and approval holders. This paper introduces the new obligations under the Convention on International Civil Aviation, reviews the current aviation regulations and procedures and presents the strategy for the establishment of the regulatory system to ensure the airworthiness of aircraft.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.525-528
• /
• 2006

Recently, Korea government prepared Act on facilitation of construction waste recycling in December 2003 for effective recycling of rapidly increasing construction wastes, and has enforced the Act on Jan. 2005. This Act limits the definition of recycled aggregates to the aggregates which obtained quality certificate and for this purpose, government has operated quality standard and certificate system of recycling aggregate. The objective of this experimental study is to evaluate the mechanical properties of recycled coarse aggregate concrete according to curing method by ready-mixed concrete. Compressive strength ratio of recycled aggregate concrete under air-dry curing/wet curing was $74{\sim}91%$. KCI code for conventional concrete overestimated elastic modulus for recycled coarse aggregate concrete.

• Journal of Aerospace System Engineering
• /
• v.15 no.4
• /
• pp.30-39
• /
• 2021

This paper presents a study on the design and structural substantiation of the interior structure of the new VVIP aircraft. In this study, the structural design and analysis of the compartment with aluminum alloy and sandwich composite panel were performed. The structural design requirements from the Federal Aviation Administration were identified. The structural analysis of the compartment was performed by the utilization of the finite element analysis method, for the structural design process. Therefore, the designed cabin compartment secured the structural integrity, and satisfied its certification standards and design requirements via structural analysis.

• Journal of the Korea Safety Management & Science
• /
• v.24 no.4
• /
• pp.101-107
• /
• 2022

To test a flameproof enclosure for the safety certificate, a reference pressure of explosion needs to be determined. However, the explosion pressure may be changed according to relative humidity of explosive gases. Therefore, the guideline on relative humidity should be recommended for measuring the explosion pressure for accurate and reproducible testings. This study examined the relationship of explosion pressure with relative humidity of hydrogen (31 vol %)-air and acetylene (14 vol %)-air mixture gases. The explosion pressures were measured by increasing the relative humidity of the gases by 10 % from dry state to 80 % in a cylindrical explosion enclosure of 2.3 L. on ambient temperature and atmospheric pressure (1 atm). The maximum explosive pressures were remained almost constant until the relative humidity reached 10 % for the hydrogen-air mixture and 20 % for the acetylene-air mixture. However, the maximum explosive pressures linearly decreased as the relative humidity increased. Based on the results of the study, it would be recommended to use 10 % relative humidity for the hydrogen-air mixture and 20 % for the acetylene-air mixture as the critical value in testing a flameproof enclosure.

• Journal of radiological science and technology
• /
• v.30 no.2
• /
• pp.147-151
• /
• 2007

AAPM TG43 report has recommended to measure air kerma strength with the strength of source. Main purpose of this study is to verify the accuracy of air kerma strength provided by manufacturer. Materials for this study were MAX-4001 Electrometer, HDR 1000 Plus of the corporation of standard imaging, and 6 french bronchial Applicator with 1000 mm. we measured ionization current in 10-90 mm range from the bottom of the central axis of chamber. The reference point of calibration displayed by the maximum ionization current in the ionization current curve was measured, and air kerma strength was computed from the maximum ionization current. we acquired 50 mm distance to correspond with the maximum ionization current in the ionization current curve. Its distance has perfectly fitted to the source reference point of calibration certificate of UW-ADCL. Air kerma strength computed value has measured about 0.5% more than calibration value provided by manufacturer. Air kerma strength of calibration certificate provided by manufacturer has acquired reliable results. This study shows that considering the move error of dwell position of source and the dead space length in well-type chamber is a good way to get an accurate result.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.1
• /
• pp.32-38
• /
• 2003

Staged combustion, such as air- and fuel-staging, is a relatively well-known technique fur reduction of NOx emission and used in combination with other techniques nowadays. However, the design variables are still selected depending upon operating conditions. There are many variables tested to investigate the NOx emission characteristics fur changing of fuel or air velocity, swirl intensity, and staging ratio of air and fuel in multi-staged burner. In air-staging case, the fuel-rich condition of the primary combustion zone is very helpful to reduce NOx emission and its range is known to be restricted by the increase of carbon monoxide. However, in many cases carbon monoxide level is not too high to be restricted operating condition. So we tried to expand the equivalence ratio range to the richer condition in the primary combustion zone and certificate the function of each burner component and its contribution to the overall NOx production.