• Atmosphere
• /
• v.14 no.3
• /
• pp.19-28
• /
• 2004

In this study, two years Automatic Weather Station (AWS) data observed near the coast and islands are used to evaluate gust factors only when time averaged wind speed is higher than 5 ms. The gust factors are quite different in spatial and temporal domain according to analysis method. As the averaged time is increased, the gust factors are also increased. But the gust factors are decreased when wind speed is increased. It is because each wind speed is averaged one and a maximum wind is the greatest one for each time interval. The result from t-test is shown that all data are included within the 99% significance level. A sample standard deviation of ten minutes and one minute are 0.137~0.197, 0.067~0.142, respectively. Recently, the gust factor provided at the Korea Meteorological Administration (KMA) Homepage is calculated with one-hour averaged method. All though this method is hard to use directly for forecasting the strong wind over sea and coast, the result will be a great help to express Ocean Storm Flash in the Regional Meteorological Offices and the Meteorological Stations.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1993.06a
• /
• pp.206-209
• /
• 1993

The main purpose of this paper is to verify the effectiveness of a high resolution direction finding method, so called the‘averaged MUSIC’. This method uses a new sample array covariance matrix that consists of diagonal components obtained by taking averages of the diagonal component values of the sample covariance matrix for the MUSIC. The paper shows that the proposed method performs higher resolved direction-of-arrival estimation and better resolution probability than the MUSIC in such cases as low signal-to-noise ratio, when the number of sensors used is finite, based on the statistical analysis.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.4
• /
• pp.129-137
• /
• 1994

In this paper, a new texture feature extraction method for texture image classification is proposed. The proposed method is a modified texture spectrum method. It uses local weighting averaged texture unit, that is, the neighbor pixels are weithted and averaged in 4-direction and the calculated values are compared with center pixel to find texture units. The proposed method has only 81 texture units and these units are really good features for texture classification. The proposed method is applied to vegetable images and Blodatz album images and compared with several conventional methods for the feature extraction time and the recognition rate.

• Journal of Nutrition and Health
• /
• v.30 no.5
• /
• pp.512-519
• /
• 1997

To investigate the energy, protein, lipid, and lactose intakes of breast-fed infants of lacto-ove-vegetarians, 25 infants(13 boys, 10 girls) were examined on the 0.5th, 1st, 2nd, and 3nd months of lactation. The amount of breast milk intake was determined by a test-weighing method, and the energy content of protein, lipid, and lactose was calculated using the Atwater factor. Thedaily energy intake for boys averaged 316, 436, 447, and 431kcal and that of girls averaged 284, 399, 401, and 390kcal during lactation, respectively. Average energy intake of boys from milk from 2nd week to the 3rd month postpartum was significantly higher than that of girls(p<0.05), because milk intake volume of boys was much higher than that of girls. The protein intake of boys on 2nd week-3rd month averaged 7.33g/day and that of girls averaged 6.29g/day. The lipid intake of 2nd week, months averaged 21.8g/day and that of girls averaged 20.1g/day. The lactose intake of boys averaged 45.48g/day, while that of girls averaged 41.09g/day. The mean intake of protein and lactose in boys was significantly higher than that of girls.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.9A
• /
• pp.2355-2364
• /
• 1998

In conventional fractal decoding procedure, the reconstructed image is obtained by a rpredefined number of iterations starting with an arbitrary initial image. Its convergence speed depends on the selection of the initial image. It should be solved to get high speed convergence. In this paper, we theoretically reveal that conventional method is approximately decomposed into the decoding of the DC and AC components. Based on this fact, we proposed a novel fast fractal decoding algorithm made up of two steps. The averaged-image considered as an optimal initial image is estimated in the first step. In the second step, the reconstructe dimag eis genrated from the output image obtained in the first step. From the simulations, it is shown that the output image of the first step approximately converges to the averaged-image with only 15% calculations for one iteration of conventional method. And the proposed method is faster than various decoding mehtods and evenly equal to conventioanl decoding with the averaged-image. In addition, the proposed method can be applied to the compressed data resulted from the various encoding methods because it does not impose any constraints in the encoding procedure to get high decoding speed.

• Nuclear Engineering and Technology
• /
• v.24 no.3
• /
• pp.252-262
• /
• 1992

The intent of this study is to develop an efficient calculation method which can be used to analyze the heterogeneous time-dependent reactor problems. By using the nodal theory one can not only reduce the calculational efforts, but accurately determine the group dependent flux densities averaged over the entire homogeneous nodes. This method uses correction factors(called“discontinuity factors”) in a rigorous manner to obtain the relationship between the node-averaged flux and the surface-averaged fluxes and currents. The discontinuity factors are calculated from the node-averaged fluxes, diffusion coefficients, and the discontinuity factors of the previous time step. The test results for two benchmark problems demonstrate the accuracy and efficiency of the method developed for the transient application in which assembly-size nodes can be used.

• MALSORI
• /
• no.64
• /
• pp.155-169
• /
• 2007

Discrimination between speech and music is important in many multimedia applications. In our previous work, focusing on the spectral change characteristics of speech and music, we presented a method using the mean of minimum cepstral distances (MMCD), and it showed a very high discrimination performance. In this paper, to further improve the performance, we propose to employ time-averaged MFCC in computing the MMCD. Our experimental results show that the proposed method enhances the discrimination between speech and music. Moreover, the proposed method overcomes the weakness of the conventional MMCD method whose performance is relatively sensitive to the choice of the frame interval to compute the MMCD.

• Nuclear Engineering and Technology
• /
• v.21 no.3
• /
• pp.193-204
• /
• 1989

This paper develops a new method for reconstructing neutron flux distribution, that is based on the maximum entropy Principle in information theory. The Probability distribution that maximizes the entropy Provides the most unbiased objective Probability distribution within the known partial information. The partial information are the assembly volume-averaged neutron flux, the surface-averaged neutron fluxes and the surface-averaged neutron currents, that are the results of the nodal calculation. The flux distribution on the boundary of a fuel assembly, which is the boundary condition for the neutron diffusion equation, is transformed into the probability distribution in the entropy expression. The most objective boundary flux distribution is deduced using the results of the nodal calculation by the maximum entropy method. This boundary flux distribution is then used as the boundary condition in a procedure of the imbedded heterogeneous assembly calculation to provide detailed flux distribution. The results of the new method applied to several PWR benchmark problem assemblies show that the reconstruction errors are comparable with those of the form function methods in inner region of the assembly while they are relatively large near the boundary of the assembly. The incorporation of the surface-averaged neutron currents in the constraint information (that is not done in the present study) should provide better results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.493-503
• /
• 2014

The NRCS-CN method is generally applied for estimating effective rainfalls in practice, in which the basin-averaged CN is normally used. In order to develop a more appropriate method for estimating effective rainfalls in a basin, this study compared estimated effective rainfalls from two distinct methods with the observed direct runoff. The first method is to estimate the basin-representative effective rainfall using the basin-averaged CN (hereafter, effective rainfall I), whereas the second method to estimate the basin-averaged effective rainfall through areal-averaging sub-area effective rainfalls corresponding to the soil type and landuse type (hereafter, effective rainfall II). The overall results indicated that the effective rainfall II was higher than the effective rainfall I and closer to the observed direct runoff. The study also performed error analyses to verify that the effective rainfall II can be applied in practice in a basin as more accurate estimate of basin-representative effective rainfall.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.4
• /
• pp.79-86
• /
• 1999

Electronic Speckle Pattern Interferometry(ESPI) is a powerful tool to measure the vibration mode shape and resonance frequency for modal analysis. As for ESPI this method is very suited for full-field measurement of objects in industrial areas because the interferograms are recorded with a video camera and evaluated in real-time with a computer. In this study We performed experiments at the same constraint conditions as disk brake of the practical vehicle as far as possible and obtained the resonance frequencies and vibration mode shapes by using time-averaged ESPI at once. Finally to assure the expetimental results by time-averaged ESPI we also compare those with results obtained by Laser Doppler Vibrometer and obtained good agreement.