• Journal of Physiology & Pathology in Korean Medicine
• /
• v.18 no.1
• /
• pp.179-186
• /
• 2004

In order to search for the ways of use in distilled liquid of Shogunjung-tang, an oriental medical prescription, the study examined the differences in the activated degree of cells and immunological effects, which are supplied by restoratives such as the existing extracted liquid and distilled liquid of Shogunjung-tang. As seen from the above results, both the extracted liquid of Shogunjung-tang and distilled liquid have remarkable efficiency in the increase of cells, the efficient condition of immunity activation degree possibly formed by these two and activation of cells and organism, in which distilled liquid in the beginning and the extracted liquid later tend to show its efficiency.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.18 no.1
• /
• pp.148-156
• /
• 2004

In order to searched for the ways of use for distilled liquid of Cervus Elaphus Xanthopgus, the study examined the difference of immunological efficiency generally raised in the existing extracted liquid and distilled liquid of Cervus Elaphus Xanthopgus. As seen from the above results, both the extracted liquid of Cervus Elaphus Xanthopgus and distilled liquid have remarkable efficiency in the increase of cells, the efficient condition of immunity activation degree, the effect of anti-cancer possibly formed by these two and activation of cells and organism, in which distilled liquid in the beginning and the extracted liquid later tend to show its efficiency.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.732-737
• /
• 2000

The purpose of this study is to compare the SMD(Sauter mean diameter) with different vibrant plates. Each vibrant plates have different surface roughness. Also liquid film thickness are measured for explanation how to concern atomization. Ultrasonic waves is used for vibration. Immersion liquid method is used for the measure of SMD and also liquid film thickness is measured using of point needle method. Distilled water and gasoline fuel are used to liquids. Supplied liquid flow rates are $18{\sim}296cc/min$. Centerline average roughness of vibrant plates are 0.5, 2.0, 4.7, $9.5\;{\mu}m$ and diameter of vibrant plate is 60mm. In result, good atomization of liquid is obtained in widen flow rates. The mean droplet size is increased in orders of 4.7, 2.0. 9.5, $0.5\;{\mu}m$ surface roughness. Distilled water has a big mean droplet size than gasoline fuel in low flow rate. Above the 78cc/min flow rates, distilled water has a small mean droplet size than gasoline fuel. Liquid films changes are measured with ultrasonic power. Also, cavitation effect on sprays is observed.

• Journal of Technologic Dentistry
• /
• v.36 no.2
• /
• pp.83-89
• /
• 2014

Purpose: This study is to evaluate the effect of modeling liquid on the shear-bond strength between zirconia core and veneering ceramic. Methods: Disk-shaped (diameter: 12.0mm; height: 3.0mm) zirconia were randomly divided into six groups according to the surface conditioning method and whether modeling liquid is used or not to be applied (N=60, n=10 per group): group 1-control group with distilled water(ZD); group 2-control group with modeling liquid(ZM); group 3-airborne particle abrasion with $110-{\mu}m$ $Al_2O_3$(AD) with distilled water; group 4-airborne particle abrasion with $110-{\mu}m$ $Al_2O_3$ with modeling liquid(AM); group 5-liner with distilled water(LD); group $6{\pounds}{\neq}liner$ with modeling liquid(LM). Contact angles were determined by the sessile drop method at room temperature using a contact angle measurement apparatus. The specimens were prepared using dentin veneering ceramics, veneered, 3mm high and 2.8mm in diameter, over the cores. The shear bond strength test was performed in a Shear bond test machine. Load was applied at a cross-head speed of 0.50mm/min until failure. The fractured zirconia surfaces were evaluated by using stereomicroscope (${\times}30$). Collected data were analyzed using SPSS(Statistical Package for Social Sciences) Win 12.0 statistics program. Results: ZD showed the highest contact angle($50.6{\pm}5.4^{\circ}$) and LD showed the lowest value($6.7{\pm}1.3^{\circ}$). Control groups and zirconia liner groups were significantly higher contact angle than liner groups(p<0.05). LD was the highest shear bond strength($43.9{\pm}3.8MPa$) and ZD was the lowest shear bond strength($24.8{\pm}4.9MPa$). Shear bond strengths of control groups and contact angle of liner groups were not significantly different((p>0.05). Liner groups presented adhesive failures. The others groups showed cohesive and adhesive failures. Conclusion: Modeling liquid groups showed lower contact angles and lower shear bond strength compared to those of distilled water groups.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.5
• /
• pp.273-276
• /
• 2001

In order to develop effective acclimatization methods for Aralia elata plantlets regenerated from somatic embryos, various acclimatizing conditions were compared regarding both survival rate and growth of the plantlets. The plantlets were transplanted into plastic boxes containing artificial soil in the presence of either several levels of MS liquid media, distilled water, 2% sucrose or 0.1% hyponex solution. They were then cultured by spraying of distilled water twice a week and maintained in the normal tissue culture room. Perlite was proved to be better than vermiculite on survival rate and growth of the plantlets. As the size of perlite (larger than 0.2 cm in diameter) increased, both the survival rate and growth of the plantlets improved. Among the various MS liquid media and different aqueous solutions tested, distilled water appeared to result in the best survival rate and growth. MS media were also effective in increasing survival rate and supporting growth when diluted to 1/4 and/or 1/8. The acclimatized plantlets could be transplanted directly onto the nursery bed and grown normally. The above results suggest that plantlets regenerated from somatic embryos of Aralia elata be effectively acclimatized using a plastic box containing perlite with distilled water treatment.

• Korean Journal of Veterinary Service
• /
• v.39 no.2
• /
• pp.81-86
• /
• 2016

Honeybee venom (BV) from Apis mellifera L. has been used as natural antimicrobial compounds in pigs, cows, dairy cattle and chicken farms in Korea. The purpose of this study was conducted to confirm homogeneity and stability of BV dissolved with distilled water or saline solution. Melittin was analyzed with ultra-high performance liquid chromatography (UPLC) for BV to secure the validation of analysis. BV at concentration of 1 mg/mL was dissolved with distilled water or saline solution at room temperature. Homogeneity of BV dissolved with distilled water or saline solution at upper, milddle, and lower layers all satisfied the accuracy and precision criteria. Stability of BV dissolved with distilled water or saline solution for 7 days all satisfied the criterion both light and dark storage condition. BV has satisfied with homogeneity and stability in distilled water or saline solution at room temperature under light or dark condition. The results of this study suggest that BV has a possibility as the substitute of natural antimicrobial agents for the animal drugs and feed additives.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.29 no.2
• /
• pp.124-131
• /
• 1993

Recently. with the rapid development in large sea water systems. there occurs much interest in the study of erosion-corrosion. In this study. the mild steel(SB41) was tested by using of a erosion-corrosion test apparatus with fountain-jet and was investigated under the environments of liquid, air-liquid 2 phase flow and solid particle-liquid 2 phase flow. Main results obtained are as follows : 1. The weight loss by corrosion-erosion in air-liquid 2 phase flow are more increased than that in only liquid solution. 2. Effect of air-liquid 2 phase flow on corrosion-erosion sensitivity becomes more sensitive in natural seawater than that in distilled water. 3. The corrosion potential by corrosion-erosion in air-liquid and solid particle-liquid 2 phase flow becomes noble than that of only liquid solution.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.11a
• /
• pp.103-103
• /
• 2018

The liquid cathode processing is necessary to separate cadmium from the actinide elements in the pyroprocessing since the actinide deposits are dissolved or precipitated in a liquid cathode. Distillation process was employed for the cathode processing owing to the compactness. It is very important to avoid a splattering of cadmium during evaporation due to the high vapor pressure. Several methods have been proposed to lower the splattering of cadmium during distillation. A multi-layer porous round cover was proposed to avoid a cadmium splattering in our previous study. In this study, distillation behavior of $Cd-ZrO_2$ and Cd - Bi systems were investigated to examine a multi-layer porous round cover for the development of the cadmium splatter shield of distillation crucible. It was designed that the cadmium vapor can be released through the holes of the shield, whereas liquid drops can be collected in the multiple hemisphere. The cover was made with three stainless steel round plates with a diameter of 33.50 mm. The distance between the hemispheres and the diameter of the holes are 10 and 1 mm, respectively. Bismuth or zirconium oxide powder was used as a surrogate for the actinide elements. About 40 grams of Cd was distilled at a reduced pressure for two hours at various temperatures. The mixture of the cadmium and the surrogate was distilled at 470, 570 and $620^{\circ}C$ in the crucible with the cover. Most of the bismuth or zirconia remained in the crucible after distillation at 470 and $570^{\circ}C$ for two hours. It was considered that the crucible cover hindered the splattering of the liquid cadmium from the distillation crucible. A considerable amount of the surrogate material reduced after distillation at $620^{\circ}C$ due to the splattering of the liquid cadmium. The low temperature is favorable to avoid a liquid cadmium splattering during distillation. However, the optimum temperature for the cadmium distillation should be decided further, since the evaporation rate decreases with a decreasing temperature.

• Journal of ILASS-Korea
• /
• v.3 no.4
• /
• pp.50-57
• /
• 1998

The utilization of resonance should be considered to get the maximum effect of ultrasonic to atomize liquid. The ultrasonic generator, transducer, horn, and all attached parts are used to produce the resonance, and specially the characteristics of liquids such as liquid load, property, and etc., for the liquid atomization affinity are considered. In this study, the variable device of liquid load was made and distilled water and city water selected as experimental liquids were sprayed by a twin-fluid spray method and their diameters, distributions, and spray quantum of spray droplets were measured by the light scattering system. And all data were observed, compared and considered relatively. In results, a lot of phenomena of liquid atomization affinity by ultrasonic appeared in accordance with liquid loads, namely head h.

• Food Science and Biotechnology
• /
• v.17 no.3
• /
• pp.637-641
• /
• 2008

This study investigated the heat stability of L-ascorbic acid (AA) in acetic acid solution. To analyze the degradation of AA using high performance liquid chromatography (HPLC), AA was measured at a wavelength of 244 nm in acetic acid and 265 nm in distilled water. During the storage of AA in acetic acid or distilled water at $37^{\circ}C$, degradation of AA was slower in acetic acid than in distilled water. On examining various ratios of AA to acetic acid, the stability of AA at $100^{\circ}C$ for 30 min was the highest when the concentration of acetic acid was 10 times higher than the concentration of AA. After acetic acid was added into AA degraded by heating, the AA is stabilized by reheating. Ultimately, these results indicate that degraded AA is reduced by hydrogen ions dissociated from acetic acid, and the rate of reduction of degraded AA in acetic acid solution is improved with heat processing.