• 동의생리병리학회지
• /
• 제19권5호
• /
• pp.1105-1111
• /
• 2005

In order to investigate the meanings and bases of transforming theories of diseases(病傳論), several relevant theories were collected from medical books since . The outside-to-inside changing process(pyoree jeon) was the fundamental pattern in febrile diseases regardless of slang han and wen bing after Han dynasty. But in case of numb disease the three exogenous pathogenic factors of wind, cold and dampness got into each viscera through five tissues like skin, vessesl, flesh, tendons, bones respectively. It was called corresponding changing process(sanghap jeon) here. The pathogenic changing process(byungsa jeon) had complicated details to explain pathologic processes, but could give useful informations on evaluating relative strength of pathogens and tendency ahead. The changing process of diseases of internal injuries were explained in case of emotional distress which is outbroken abruptly didn't follow regular order of viscera-emotion relations. So it was named random changing process(bulcha jeon) after 's usage. And marasmus and asthenic disease followed top-to-down or down-to-top changing process(sangha jeon) based on . There are many types of changing process of diseases between viscera and viscera or viscera and bowels like generation changing process, restriction changing process, changing process between couple, changing process of mutual transmission based on attributions of each element by the theory of 5 phases(五行論). And changing process to a neighbor doesn't have any special relations within two organs but has anatomical contiguity and physiological continuity between them. The transforming theories of diseases bring forth useful understanding on comings and goings of pathogenic factors and tendency and prognosis of disease, so they are needed to be taught in the course of pathology class.

• 기록학연구
• /
• 제54호
• /
• pp.151-178
• /
• 2017

본 연구는 기록관리 현장의 전자기록관리영역의 문제를 확인하고 IT신기술의 도입으로 인해 급변하고 있는 기록 생산 및 관리 환경의 변화에 조응할 수 있는 새로운 전자기록관리체계의 설계를 위해 과제를 도출하는 것을 목적으로 한다. 새로운 정부의 기록관리 혁신에 맞추어 프로세스, 시스템, 인프라 모든 영역에서 이전과는 다른 차세대 기록관리 개념 설계가 이루어져야 하는 시기이다. 이러한 관점에서 차세대 기록관리의 가치와 지향이 어떠해야 하는지 방향성을 도출하고 이에 따라 프로세스, 시스템, 인프라 영역의 문제를 확인하고 과제화하였다.

• 한국실내디자인학회논문집
• /
• 제23권5호
• /
• pp.3-13
• /
• 2014

Typology in Contemporary Architecture wants to escape from the classical typology that has the problems about specific program of structuralism, typical repeatation of customary form. As visible and non-visible things are appeared in contemporary architecture through the analysis of the inner system involving development process of changing itself, typology of contemporary is utilized at a tool of form generation in the process of architect. And it notes that the structural properties of the building system. The form of contemporary architecture has the new connecting strucure not reduced to existing ones. It carries out generative access as a device in order to solve the complexity of society. From this perspective, we analyze the process of projects of contemporary architects that can be typological strategy not representation of post geometric form but a tool of form generation in architectural process. As a result, we can find four characteristics of typology as a tool of form generation; 'interference and mix of program', 'continous slabs', 'rearrangement through relationship setting', 'transformation of multi-layers'. These are expanding to the process that reflect history and context or infer from morphology. Therefore, typology as architectural process of form generation overcomes morphological typology of classical typology and suggests that the different architectural approach having potential possibility.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집(한일합동학술편); 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.780-785
• /
• 1987

The measuring point data of clay model are widely used to design parts whose external features are important design factor such as automobiles and general die products. This paper presents a method for improving the process to generate smooth surfaces from the measuring point data using turnkey CAD/CAM system. The process of smooth-surface generation involves several steps: styline finding, curve fairing, surface generation and filleting. The process is improved by automatic curve fairing, local correction of surface and multi-boundary surface treatment. An automobile bumper and a telephone receiver are measured and modeled to test the new method. Significant time saving is resulted by changing interactive mode to automatic mode and eliminating inefficient loop of surface generation process.

• 진공이야기
• /
• 제4권4호
• /
• pp.14-17
• /
• 2017

Recently, quantum-dots light emitting diodes (QLEDs) are considered as a next-generation display due to the superior luminescence behaviors, photo stability and narrow spectral emission bandwidth. Moreover, the emission color of QLEDs can be easily controlled by changing the dimension of quantum dots (QDs). A flexible display based on QLEDs can be achieved using low-cost solution process, such as a printing technology. Therefore, QLEDs are expected as a next generation display. In this document, recent progresses in QDs technology will be introduced.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.69.6-69
• /
• 2002

The optimal byproduct gas supply system was developed for the optimal management of the byproduct gases in the iron and steel making process based on EXCEL environment. It supplies optimal byproduct gas distribution result as well as analysis including expected electricity generation, holder level change, amount of oil consumption, energy distribution to each boiler, and efficiency of energy resource. To reflect the changing environment of the plant such as maintenance, the system was developed to easily change the optimization model for changing configuration of the system. To verify the performance of the system , case studies for various situation was performed with the developed system, a...

• 한국기계가공학회지
• /
• 제8권1호
• /
• pp.3-9
• /
• 2009

Recently, a high speed cutting is essential requirement to satisfy latest demand of high precision product and machining of hard materials. However heat generation by high speed rotation causes many problems. The machining error and shortening spindle lifetime by thermal stress is typical example. Generation of heat is mostly caused by sliding at the rotor and bearing. For minimization of heat generation at bearing, decision of the condition of proper lubrication is necessary. The thermal study about 40,000rpm spindle by changing the condition of oil-air lubrication method is carried out in this paper. The results of this paper can be used effectively in the decision of oil-air lubrication condition of other types of spindle for machine tools.

• 산업기술연구
• /
• 제15권
• /
• pp.15-22
• /
• 1995

We have studied the generation and behavior of negative ions in silane plasmas. The negative ions were formed by homogeneous reaction in silane plasma and the behavior of negative ions were predicted by solving the model equations. The concentration profiles of negative ions were shown as a function of reactor length and time. The effects of process variables such as reactor pressure, flow rate and electrical field strengths on the behavior of negative ions were analyzed.

• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.61-68
• /
• 2007

There has been a lot of research on and release of commercial systems that enable evaluation and visualization of construction methods. These have enabled the selection of good construction plans. However, the process in which engineers build 3D geometry, formulate a schedule and eventually synchronize them is still a time-consuming process. Changing any aspect of the geometry or the schedule and re-linking them is also time-consuming. Therefore, the engineers may compromise on getting the best solution. This paper describes a technique to automate the generation of multiple sets of schedules, quantity takeoffs and 4D visualization from a single 3D model.

• 한국정밀공학회지
• /
• 제14권2호
• /
• pp.66-73
• /
• 1997

In many optimal methods for the structural design, the structural analysis is performed with the given design parameters. Then the design sensitivity is calculated based on its structural anaysis results. There-after, the design parameters are changed iteratively. But genetic algorithm is a optimal searching technique which is not depend on design sensitivity. This method uses for many design para- meter groups which are generated by a designer. The generated design parameter groups are become initial population, and then the fitness of the all design parameters are calculated. According to the fitness of each parameter, the design parameters are optimized through the calculation of reproduction process, degradation and interchange, and mutation. Those are the basic operation of the genetic algorithm. The changing process of population is called a generation. The basic calculation process of genetic algorithm is repeatly accepted to every generation. Then the fitness value of the element of a generation becomes maximum. Therefore, the design parameters converge to the optimal. In this study, the optimal design pro- cess of a machine tool structure for static loading is presented to determine the optimal base supporting points and structure thickness using a genetic algorithm.