• Korean Journal of Veterinary Research
• /
• v.46 no.1
• /
• pp.27-34
• /
• 2006

This paper describes the slaughter check results of breeding pigs from the Korean Swine Testing Station for the control of endemic diseases. Gross lesions monitored in the present study included those conditions commonly associated with economically significant subclinical herd infections: enzootic pneumonia, pleuropneumonia, pleuritis, atrophic rhinitis, liver white spots, papular dermatitis and ileitis. A total of 128 slaughter pigs were investigated at 4 subsequent tests according to the slaughter check procedures established. The prevalence of enzootic pneumonia, pleuropneumonia and pleuritis in the initial test was 67.9%, 28.6% and 17.9%, respectively. However, these were decreased to 46.7%, 6.7% and 6.7%, respectively, in the last test after implementation of counter measures including clean-up protocols and medication programs (p > 0.05). The mean pneumonic score also significantly decreased from 6.8 in the initial test to 2.8 in the last test. The prevalence of atrophic rhinitis (${\geq}score\;2$) was 32.2% and mean atrophic rhinitis score of 1.1 were recorded. However, no significant improvement of conditions was achieved with the counter measures indicating that atrophic rhinitis was originated from the source herds and lesions developed early in the life. In the initial test, prevalence of liver white spots and papular dermatitis lesions was 21.4% and 25.0%, respectively. These conditions were cleaned by the implementation of parasite control measures with all-in all-out, strict clean-up protocols and proper medications adopted in the present study (liver white spots, p = 0.0124; papular dermatitis lesions, p = 0.0055). The prevalence of ileitis lesions in slaughter pigs from the initial test was 28.6%, it could be gradually reduced by the use of repeated treatments and control measures but the effect was not so significant (p > 0.05). In conclusion, slaughter check procedures were successfully established and applied for the control of endemic diseases in the Korean Swine Testing Station.

• Journal of Forest and Environmental Science
• /
• v.12 no.1
• /
• pp.1-12
• /
• 1996

This study was carried out to estimate drying schedule of Fagaceae four species grown in Kangwon-Do by oven-drying at $100^{\circ}C$ which aimed to elucidate the characteristics such as current moisture content, drying process, initial check, collapse and internal check during drying following each board thickness (1.5cm, 2.5cm, 3.5cm, 4.5cm). The results were as follows; Current moisture content of each board showed a rapid drying curve with the high initial moisture content of board. With the high initial moisture content, the incease of board thickness and the slowness of changing rate of moisture content, species took long to do drying. Also, the initial conditions of drying had to be mild condition with the increase of board thickness.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.5 s.54
• /
• pp.48-56
• /
• 2003

This paper has developed an efficient nonlinear finite element method that covers both initial deformations and initial stresses of general distribution in calculating the ultimate strength of ring-stiffened cylinders. The developed method and two widely-used commercial codes (NASTRAN and ABAQUS) were simultaneously applied to the same analysis model within the extent of those commercial codes' coverage to check the validity of the present method. After the validity check, it was used for parametric studies for more general cases of initial stress distribution, which produced some useful information about the imperfection sensitivity of the ultimate strength of ring-stiffened cylinders.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• v.6 no.1
• /
• pp.51-59
• /
• 2003

This paper has developed an efficient nonlinear finite element method that covers both initial deformations and initial stresses of general distribution in calculating the ultimate strength of ring-stiffened cylinders. The developed method and two widely-used commercial codes (NASTRAN and ABAQUS) were simultaneously applied to the same analysis model within the extent of those commercial codes' coverage to check the validity of the present method. After the validity check, it was used for parametric studies for more general cases of initial stress distribution, which produced some useful information about the imperfection sensitivity of the ultimate strength of ring-stiffened cylinders.

• International Journal of Fluid Machinery and Systems
• /
• v.1 no.1
• /
• pp.140-147
• /
• 2008

An experiment setup was introduced to study dynamic behaviour of different types of check valves and the effects of air entrainment on the check valve performance under pressure transient condition. The experiment results show that the check valves with low inertia, assisted by springs or small traveling distance/angle gave better performance under pressure transient condition than check valves without these features. Air entrainment was found to affect both wave speed and reverse velocity. With the increase of the initial air void fraction in pipeline, the experiment results show that the wave speed was reduced, the reverse velocity was increased. The first peak pressure increased initially and then decreased with the increase of the initial air void fraction, the pressure surge periods were increased proportionally with air void fraction due to the greatly reduced wave speed. The study can be applied to help choosing suitable check valves for a particular pumping system.

• Journal of Forest and Environmental Science
• /
• v.10 no.1
• /
• pp.38-48
• /
• 1994

This study was carried out to estimate drying schedule of Fagaceae four species grown in Kangwon-Do by oven-drying at $100^{\circ}C$ which aimed to elucidate the characteristics such as current moisture content, drying process, initial check, collapse and internal check during drying. The results were summerized as follows ; Current moisture content of each board showed a rapid drying curve with the hight initial moisture content of board and species with the high initial moisture content took long to do drying. Appearance of checks for Quercus variabilis were extremely severe and estimated schedule was $T_5-C_2$. The shrinkage rate of grain direction was in the order of tangential direction > radial direction > longitudial direction and the shrinkage rate of oven-drying at $100^{\circ}C$ was bigger than normal shrinkage rate.

• Journal of Forest and Environmental Science
• /
• v.11 no.1
• /
• pp.50-60
• /
• 1995

This study was carried out to estimate drying schedules of Larix Leptolepis and Pinus koraiensis by oven-drying at $100^{\circ}C$ which aimed to elucidate the characteristics such as current moisture content, drying process. initial check, collapse, internal check and drying rate during drying following each board thickness (2, 3. 4, 5, 6cm). the results were summerized as follows; Current moisture content of each board showed a rapid drying curve with the decrease of board thickness. At 20% moisture content, the drying rate of Larix leptolepis was higher than that of Pinus koraiensis and the drying rate of boards was lower with the increase of board thickness. From the estimated drying schedules. the initial conditions of drying of Larix leptolepis had to be milder than those of Pinus koraiensis and the boards thickness of 5cm, 6cm had to be most mild conditions.

• Computers and Concrete
• /
• v.22 no.2
• /
• pp.133-142
• /
• 2018

The deterioration of existing bridges has become a major problem around the world. In the paper, a new model and an associated stress checking method are proposed for concrete box girders strengthened by external prestressing. The new model called the spatial grid model can analyze all the spatial behaviors clearly by transforming the box girder into discrete orthogonal grids which are equivalent to plate elements. Then the three-layer stresses are employed as the stress checking indices to evaluate the stress state of the plate elements. The initial stress check before strengthening reveals the cracked and potential cracking areas for existing bridges, making the strengthening design more targeted and scientific; the subsequent stress check after strengthening evaluates the strengthening effect and ensures safety. A deficient bridge is selected as the practical example, verifying the accuracy and applicability of the proposed model and stress checking method. The results show that principal stresses in the middle layer of plate elements reflect the main effects of external prestressing and thus are the key stress checking indices for strengthening. Moreover, principal stresses check should be conducted in all parts of the strengthened structure not only in the webs. As for the local effects of external prestressing especially in the areas near anchorage and deviator, normal stresses check in the outer and inner layers dominates and local strengthening measures should be taken if necessary.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.4
• /
• pp.529-546
• /
• 2009

Gauss and Laplace methods for initial orbit determination (IOD) are classical orbit determination tools and have been used very efficiently in optical satellite surveillance system. Several studies related to these two methods have been released until now. In this study, we found that the trends of IOD accuracy for different time interval between three pairs of measurement datas show unexpected results. Therefore, we checked the possible cause of these differences. In order to check various orbit types, we used most of satellite data which is able to obtain. To check the characteristics of methodology-only, we used simulated observation data. And we used real observation data for specific satellites to check the characteristics appeared when we applyed these methods to optical satellite surveillance system. As a result, we found that trends of IOD accuracy for time interval could be different because of satellite position observed.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.33-38
• /
• 2012

A LEO Satellite performs automatic initial operations by FSW after separation from a launch vehicle. After initial operation by FSW is finished, preparation for normal operation is performed by ground during bus initial activation and checkout phase. First of all, we check state of health of the satellite including solar array deployment status. After then, each unit of spacecraft bus is activated and checked. After activation and checkout of every units used for normal operation, we check maneuver performance for imaging mission and orbit maintenance performance. Because the Bus IAC is performed during limited ground contact time, every detailed procedure must be designed considering ground contact. Therefore, the Bus IAC procedure is separated into several parts based on ground contact duration. In addition, the procedures for every possible operation including expected situation as results of IAC procedures and unexpected contingency situation must be prepared. The contingency operation is also designed based on ground contact duration. The LEO satellite was successfully launched and the Bus IAC was successfully performed. In this paper, we explain design concepts and execution results of Bus IAC.