• 제목/요약/키워드: long-length logs

검색결과 6건 처리시간 0.02초

Computing the Bucking Rate of Japanese Larch Logs for Timber Harvesting

  • Daesung Lee;Yonghee Lee;Ilsub Lee;Jungkee Choi
    • Journal of Forest and Environmental Science
    • /
    • 제40권1호
    • /
    • pp.35-42
    • /
    • 2024
  • The Japanese larch (Larix kaempferi [Lamb.] Carriere) is a major timber species in Korea. However, studies on bucking rates and merchantable logs of this species are insufficient in South Korea. To bridge these gaps, in this study, the bucking rate of Japanese larch (Larix kaempferi [Lamb.] Carriere) was computed and the number of long logs and merchantable log volumes were analyzed. Sample trees were bucked according to the log grade for trading, and collected from a forest field in Gangwon Province. The bucking rate of all Japanese larch logs was >89%. The highly profitable 2-4 logs of 3.6 m length from trees with ≤30 cm diameter at breast height (DBH) and 5-6 logs with ≥34 cm DBH were produced. The bucking rate of long logs was >84%; thus, Japanese larch was found to be suitable for the supply of high-grade timber. Additionally, to follow reasonable wood supply plans, merchantable volume tables were offered based on 3.6 m-long number of logs and small-end diameter classes. Understanding the proportion of merchantable log volumes, bucking rates, and the number of long and short logs has large-scale applications in practical forestry.

다양한 예측기법을 이용한 현장타설말뚝의 최적길이 산정 (Estimation of Optimum Pile length Using Various Prediction)

  • 최영석;임형준;송명준;장학성
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2008년도 추계 학술발표회
    • /
    • pp.700-707
    • /
    • 2008
  • As plan connecting island to island or island to land is needed, a lot of long-span bridge is being designed lately in Southern part of Korea. With development of pile equipment, overhanging large-scaled concrete pile are adopted to foundation type of main tower or pylon. About the number of 15~30 group piles per tower foundation is designed to resist long-spaning super-structure load, but by restricted condition of site investigation cost, a few boring-hole tests are performed to identify sub-ground layers. Up to now, direct-curved method connecting two or three known boring logs and representative interval method are usually used to evaluate unknown depth and rock properties at locations where piles are constructed. Because this approach is not logical and so rough, much difference occurs between designed length of piles and real length of it. In this paper, using a lot of various prediction method(reciprocal distance method, inverse square distance method and kriging method etc.), we suggest optimum length of group piles.

  • PDF

소나무와 잣나무 원목에서 변재변색 발생 (Development of Fungal Sapstain in Logs of Japanese Red Pine and Korean Pine)

  • 김규혁;김재진;나종범
    • Journal of the Korean Wood Science and Technology
    • /
    • 제30권2호
    • /
    • pp.128-133
    • /
    • 2002
  • 본 연구는 동절기(1월 중순)에 벌채된 후 목재집하장으로 운반되어 야적장에 저목 중인 소나무와 잣나무 원목을 대상으로 변재변색의 발생시기와 변색 특성을 조사하기 위하여 수행되었다. 벌채 후 3, 4, 5, 6, 8개월 경과시 변색 평가를 실시하였는데, 매 평가시 원목 3개를 임의로 선정하여 원목당 수축방향에 대해 일정 간격으로 7~9개의 두께 3 cm 원판을 채취하여 변색 원인균을 분리한 후 변재변색의 방사방향 최대 침투깊이와 % 변색율을 측정하였다. 변재변색은 전적으로 충형변색이었으며, 주요 변색원인균인 Ophiostomatoid 균을 매개하는 수피천공충은 소나무좀으로 확인되었다. 소나무와 잣나무 원목은 5월 이전까지는 변재변색의 위험없이 저목할 수 있으나 5월 이후부터는 원목의 변재변색이 급속하게 증가하였다. 변색의 정도는 소나무보다 잣나무에서 심하였으며, 장마철 저목 중에 소나무 원목에서 개떡버섯과 치마버섯의 자실체를 다수 관찰할 수 있었다. 본 연구를 통해 밝혀진 결과들은 앞으로 동절기에 벌채되어 저목 중인 소나무와 잣나무 원목에 발생하는 변재변색을 예방하기 위한 제반 조치를 취하는데 매우 중요한 자료로 사용될 것이다.

국산 침엽수 원목의 경급구분 기준에 관한 연구 (A study on log diameter classes of Korean softwood log)

  • 박정환;김광모;엄창득;정두진
    • Journal of the Korean Wood Science and Technology
    • /
    • 제41권4호
    • /
    • pp.337-345
    • /
    • 2013
  • 국산 원목의 유통체계 개선을 위해서는 원목 품질을 신뢰할 수 있는 있는 등급체계가 정착되어야 한다. 원목시장의 현실과 괴리된 원목규격의 개선을 위해 국내에서 생산되는 원목 현황과 원목이 사용되는 시장에 대한 분석이 필요하다. 이를 위해 2010년과 2011년에 국내 5개 지방산림청에서 생산 매각한 천만 본 이상의 원목자료를 수집하여 각 수종별로 경급과 재장을 분석하였다. 이를 바탕으로 원목규격의 경급과 재장구분 기준에 대한 개선방안을 모색하고자 하였다. 본 연구 주요결과를 요약하면 다음과 같다. 국산 침엽수 원목의 경급은 100~160 mm 범위의 소경재가 대부분을 차지하여 현행 원목규격의 재종구분이 현실에 비해 다소 과도하게 설정되었음을 확인할 수 있었다. 원목의 경급분포는 수종별로 서로 상이한 분포특성을 보여 수종별로 차별화된 경급기준의 필요성이 제기되었다. 국내에서 생산되는 원목의 재장이 수종마다 서로 상이하고, 제재용으로 선호되는 재장을 적극적으로 생산하지 못하는 문제점을 반영하여 재장에 관한 기준이 원목규격에 포함될 필요가 있다는 점을 확인하였다. 이러한 결과를 바탕으로 3개 수종군, 6개 재종의 새로운 침엽수 원목 구분체계를 제안하였으며, 각 등급에 적합한 지름 및 재장기준을 제시하였다.

정밀발파의 표준화(下) (Standardization of Cautious blasting)

  • 허진
    • 기술사
    • /
    • 제23권6호
    • /
    • pp.41-46
    • /
    • 1990
  • First of all, Under given condition such as bit gage of 36mm Drill bit with right class of jack-logs experimental test carried out from two face of Bench, firing of each hole brought 90 degree Angle face and them measured length of Burden and charged ammount of powder as following. (equation omitted) A=Activated Area A=ndi=m S=Peripheral length of Charged. room Ca=Rock Coeffiecency d : di=Hole diameter When constructed subway of Seoul in 1980 the blasting works increased complaint of ground vibration. in order to prevent the damage to structures. Some empirical equations were made as follows on condition with Jackleg Drill (Bit Gage ø 36mm) and within 30 meter distance between blasting site and structures. V=K(D / W)$\^$-n/ N=1.60-1.78 K=48-138 Project one of contineous works to above a determination of empirical equation on the cautious blasting vibration with Crawler Drill(ø 70-75mm) in long distance. V=41(equation omitted) V=124(equation omitted).

  • PDF

영지버섯(Ganoderma lucidum) 단목재배시 토양접촉차단재 처리별 자실체 특성 (Characteristics of Ganoderma lucidum during short log cultivation with soil contact barrier treatment)

  • 김민경;황재순;박정희;신용습;조우식
    • 한국버섯학회지
    • /
    • 제16권3호
    • /
    • pp.231-235
    • /
    • 2018
  • 본 연구에서는 참나무원목을 이용한 영지버섯 재배하우스의 토양의 이화학성조사와 재배지 온도와 같은 영지 관리 특성을 조사하였으며, 초발이 소요일수는 부직포 피복처리 등 처리 별로 차이 없이 12~13일로 나타났으며, 색도조사에서 적색도(a)의 경우 비닐처리 19.5, 관행처리 20.2, 부직포처리 19.5로 나타났으며, 황색도(b)는 비닐처리 12.7, 관행처리 13.3, 부직포처리 12.4로 나타나 처리간 비슷한 경향을 나타내었다. 처리별 생육특성은 관행처리인 무피복 토양의 경우 갓의 길이 145.7 mm, 두께 23.6 mm, 대 길이 73.9 mm, 두께 11.5 mm, 중량은 130 g을 나타내었고, 부직포피복처리에서는 갓의 길이 157mm, 두께 22.3 mm, 대 길이 93.3 mm, 두께 11.9 mm, 중량은 164 g으로 관행처리보다 우수하였다.