• Korean Journal of Environmental Agriculture
• /
• v.41 no.2
• /
• pp.101-107
• /
• 2022

BACKGROUND: Soil amendment was necessary applied for the sand that had been used to root zone of green ground in golf course because of its low water retention power and cation exchangeable capacity. This study was conducted to evaluate the effect of the mixed ratio of peat moss and coconut coir as soil amendment materials on the soil physicochemical properties applied to rootzone based on sand. METHODS AND RESULTS: The soil amendments were blended at 0, 3, 5, 7 and 10% by soil volume. The pH in the peat moss treatment was lower than that of control (0% soil amendment), and pH and electrical conductivity (EC) in the coconut coir were higher. The blending ratio of peat moss was negatively correlated with pH of rootzone soil (p<0.01), and that of coconut coir positively with EC (p<0.01). As compared with control, capillary porosity, the physical factors such as air-filled porosity, total porosity, and hydraulic conductivity of rootzone soil were increased by applying peat moss and coconut coir. For correlation coefficients between percentage of soil amendments and soil physical factors, peat moss and coconut coir were positively correlated with porosity and hydraulic conductivity (p<0.01). CONCLUSION(S): These results indicated that the application of peat moss and coconut coir affected on the change of physicochemical properties of rootzone soil, and improved soil porosity and hydraulic conductivity.

• Korean Journal of Soil Science and Fertilizer
• /
• v.23 no.4
• /
• pp.302-309
• /
• 1990

World research on production, classification, processing, use, quality control, and components of peat was briefly introduced. Peat research in Korea was reviewed and prospect of peat use and research were discussed, peat will greatly increase soil productivity in korea. Peat research appears to be necessary in view of a new material for high technology agriculture.

• Geomechanics and Engineering
• /
• v.29 no.1
• /
• pp.13-23
• /
• 2022

Peat soil has the characteristics of high moisture content, large void ratio and low shear strength. In this study, unconfined compressive strength and SEM tests are conducted to investigate the effects of ultrahigh moisture content, cement content, organic content and pH value on the strength of solidified peat. As an increase in the cement content and curing period, the failure mode of solidified peat soil changes from ductile failure to brittle failure. The influence of moisture content on the strength of solidified peat is greater than the cement content. As cement content increases from 10% to 30%, strength of solidified peat at a curing age of 28 days increases by 161%~485%. By increasing water content by 100%, decreases of solidified peat at a curing age of 28 days is 42%~79%. Compared with the strength of solidified peat with a pH value of 5.5, the strength of peat with a pH value of 3.5 reduces by 10% ~ 46%, while the strength of peat with a pH value of 7.0 increases by 8% ~ 38%. It is recommended to use filler materials for stabilizing peat soil with moisture content greater than 200%. Because of small size of clay particles, clay added in the cement solidified peat can improve much higher strength that that of sand.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.2
• /
• pp.17-22
• /
• 2020

This study was conducted to find out the optimum composition of nursery soil for raising seedling of Zelkova serrata. The treatments were regulated with the three different soil types : full peat moss(PM 100%), peat moss + perlite + vermiculite(1:1:1), peat moss + perlite + vermiculite(1:2:1). The full peat moss(PM 100%) showed the highest photosynthetic activity such as maximum photosynthesis rate(PN max), water use efficiency(WUE), Fv/Fm, PIabs and SPAD value. And also, full peat moss(PM 100%) showed relatively better growth performances. As a result of surveying the whole experiment, full peat moss(PM 100%) soil increases growth performances and enhances overall quality.

• Journal of Environmental Health Sciences
• /
• v.33 no.5
• /
• pp.462-469
• /
• 2007

Isolation and application of oil-degradation microbes from the oil-contaminated soil and the determination of optimal operation conditions about the peat moss, the addition for the oil-biodegradation. After all experiments, we have acquired three important conclusions: First, we found out the 4 microbes, Pseudomonas fluorescens, Pseudomonas aeruinosa, Kurtia sp., Bacillus ceres, with excellent capability for the oil-degradation; Second, the optimal operating conditions of the peat moss for TPH treatment were pH $7{\sim}8$, temperature $25{\sim}30^{\circ}C$, water content 20%, mixing 2 times/ day, addition volume 2%; Third, in case of the application to the oil-contaminated soil with 4 mixed microbes, the removal efficiency of TPH was increased from 54% to 83% in oil-contaminated soil and from 65% to 85% in oil-contaminated soil with the peat moss.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.858-863
• /
• 2010

The blueberry farming requires the soil condition of well-drainage, pH of 4.5 to 5.2, and high in organic matters for stable growth and development. Most of soil type of cultivated land in Korea, however, belongs to alkaline soils with low organic matter content and poor drainage. Therefore, the blueberry farmers use peat moss heavily to improve the soil condition, but the guideline on the effective and economic ratio of peat moss is not established yet. This study was performed to determine the cost effective peat moss ratio for amending soils, and to investigate the feasibility of using sawdust and coco peat as soil amendments. Peat moss, coco peat and sawdust are mixed with soil at the ratio of 0, 12.5, 50 and 100% (v/v). Among 3 organic materials with various mixture ratios, the pH of soil was the lowest in 100% peat moss and sawdust mixtures (pH 3.67 and pH 3.73, respectively), followed by pH 5.30 at 50% peat moss. The soil organic matter content are directly proportional to the mixture ratios in all three organic materials and the same trend was observed in the variation of content of exchangeable potassium in the coco peat treatments. On the contrary, the content of available phosphate, exchangeable calcium and magnesium decreased with increasing the ratio of organic materials. The nitrogen content in the leaves decreased as increasing the ratio of peat moss and coco peat in soil, but not of sawdust. The content of phosphate decreased but potassium increased as the ratio of sawdust and coco peat increased. There was no clear difference in the contents of magnesium and calcium among 3 organic materials. The plant height, stem diameter and dry weight of blueberry plants were the highest in 50 % peat moss, followed by 12.5% peat moss and 12.5% coco peat. The plants in 100% peat moss showed very poor growth. It can be concluded that peatmoss, when applied and managed appropriately, will be a good material for improving soil condition as well as securing desirable growth for blueberry. Upon coupling economic aspect, the optimum mixing ratio of peatmoss for blueberry farming is approximately 25-50%.

• Geomechanics and Engineering
• /
• v.20 no.1
• /
• pp.75-86
• /
• 2020

This study aims to simulate the stabilization process of fibrous peat samples using end-bearing Cement Deep Mixing (CDM) columns by three area improvement ratios of 13.1% (TS-2), 19.6% (TS-3) and 26.2% (TS-3). It also focuses on the determination of approximate stress distribution between CDM columns and untreated fibrous peat soil. First, fibrous peat samples were mechanically stabilized using CDM columns of different area improvement ratio. Further, the ultimate bearing capacity of a rectangular foundation rested on the stabilized peat was calculated in stress-controlled condition. Then, this process was simulated via a FEM-based model using Plaxis 3-D foundation and the numerical modelling results were compared with experimental findings. In the numerical modelling stage, the behaviour of fibrous peat was simulated based on hardening soil (HS) model and Mohr-Coulomb (MC) model, while embedded pile element was utilized for CDM columns. The results indicated that in case of untreated peat HS model could predict the behaviour of fibrous peat better than MC model. The comparison between experimental and numerical investigations showed that the stress distribution between soil (S) and CDM columns (C) were 81%C-19%S (TS-2), 83%C-17%S (TS-3) and 89%C-11%S (TS-4), respectively. This implies that when the area improvement ratio is increased, the share of the CDM columns from final load was increased. Finally, the calculated bearing capacity factors were compared with results on the account of empirical design methods.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.135-138
• /
• 2004

본 연구는 중금속으로 오염된 폐수처리에 있어 친환경적 유기흡착제로서 휴믹물질의 활용성을 평가하기 위한 기초 연구로서 이탄(peat moss)으로부터 Humin을 분리 한 후, 중금속 이온(Cd(II),Cu(II))과의 흡착특성을 조사하였다. 이탄으로부터 추출한 peat-Humin의 함량은 94%이상을 나타냈으며, 분자의 작용기 특성은 일반 토양 휴믹물질(soil humic substance)과 유사하였다. peat-Humin과 중금속 이온(Cd(II),Cu(II))과의 흡착 반응은 5분내에 빠른 흡착형을 보였으며, pH 5-6에서 가장 높은 중금속 제거율을 보였다. pH 3의 산성조건에서도 50%정도의 제거율을 보였다. pH 5에서의 등온흡착 실험결과를 Freundlich 등온식에 적용하여 해석한 결과, 각의 중금속에 대한 peat-Humin의 흡착상수(Kf)는 Cd(II)이 8.07 그리고 Cu(II)가 4.56으로 나타났다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.235-242
• /
• 2004

For this study, a Peliyagoda area located on a route was selected among many sections of a CKE(Colombo to Katunayake Expressway) route in Sri-Lanka. Its subground consists of a very weak and thick peat soil named amorphous or fibrous peat. All of data, obtained in the design process of soft ground treatment were analyzed to evaluate the settlement characteristics resulted from an embankment load and to present reasonable methods for estimation of secondary compression settlement. For these purposes, soil parameters were used obtainedby field and laboratory tests the settlement analyses were conducted base on the field monitoring results within 20 months. In addition, Reasonable methods were studied to estimate primary consolidation and secondary compression settlement.

• Journal of Wetlands Research
• /
• v.22 no.4
• /
• pp.328-336
• /
• 2020

In this study, the soil characteristics of peat layer in Korea were analysed to predict new peat distribution areas in Taean, Chungcheongnam-do. The soil characteristics of peat distribution areas in Taean were compared with those in other areas in Korea. In Korea, peat researches were conducted in various regions, such as Taean in Chungcheongnam-do, Pyeongtaek in Gyeonggi Province, Gangneung in Gangwon-do, Ulsan, Iksan in Jeollabuk-do and Jangheung in Jeollanam-do. We summarized a) topographic distribution, b) deposition type, c) soil drainage classes, and d) soil suborder of previously studied area to determine criteria for prediction of peat distribution area. Through a case study, the type of peat layer distribution area in Taean were divided into two; (1) a) valley, b) co-alluvium, c) somewhat poorly drained, d) aqualfs and (2) a) marine plain, b) alluvium, c) very poorly drained, d) aquepts. A field survey was conducted to confirm the distribution of the actual peat layer. All peat layer were located within 10-km from the coastal line which is similar to previous studies, and the peat layer was characterized with pH 5, humic acid content of less than 15% and dark brown color. The new peat layer in Taean was deeper, thicker and less humificated than other studied areas.