• Journal of the Korean Wood Science and Technology
• /
• 제32권3호
• /
• pp.15-24
• /
• 2004

The present work was undertaken to investigate the anatomical and chemical characteristics of transgenic poplar down-regulated with antisense OMT gene. Also the distribution of lignin in transgenic poplar trees was investigated at cellular level. No visible abnormal phenotype was observed in the fibers and vessel elements of transgenic poplar. Any marked differences in the staining intensities of Wiesner and Mäule color reaction were not identified in the transgenic poplar. TEM micrographs did not show any staining intensities in the cell walls stained with KMnO₄. Interestingly, the UV spectroscopy of semi-thin sections exhibited a distinct decrease of lignin absorption at 280 nm in the vessel walls, indicating transgenic poplar wood with lower amount of guaiacyl lignin in vessel elements. Chemical composition of antisense OMT poplar was almost identical to that of wild-type poplar. Klason lignin content of transgenic poplar did not show any significant difference from that of the controls. The solid state NMR spectra revealed the transgenic poplar with only slightly more syringyl lignin than the control. The present work showed that antisense OMT gene constructed in the poplar was not enough to reduce the overall content of Klason lignin, and suggested that the expression of transformation was confined to vessel walls.

• 펄프종이기술
• /
• 제45권4호
• /
• pp.16-20
• /
• 2013

Yellow poplar grown in Korea and imported eucalyptus were compared their kraft pulping characteristics and evaluated the replacing possibility of eucalyptus by yellow poplar. Difference between yellow poplar and eucalyptus were investigated in chemical composition and fiber morphology. Yellow poplar kraft pulp resulted in the higher yield, longer fiber length and thicker fiber, and higher pulp strength than that of eucalyptus. More xylan survived in eucalyptus than yellow poplar during kraft pulping, which led to similar pulp yield even though polysaccharides in Eucalyptus was 4.5% less than in yellow poplar. Longer and thicker yellow poplar pulp fiber resulted in better beating response and pulp strength properties.

• 한국가구학회지
• /
• 제24권4호
• /
• pp.345-349
• /
• 2013

Yellow poplar is well known commercial hardwood species in the world because of its availability, rapid growth, large size, excellent form, early natural pruning, and the good working quality of the wood. Therefore, yellow poplar (Liriodendron tulipifera L.) has been adopted in South Korea for decades ago, and its cultivating the saplings and silvicultural system have been studied. However, yellow poplar is still embroiled in controversy for utilization of use and worth. This species has not only advantages such as lower weight, light color, and higher machinability and bending processing, but also has disadvantages which are bad smell and different colors on heartwood and sapwood. In this study, the objective was that use of yellow poplar board as furniture materials by drying and painting process. Thirty years old yellow poplar was cut and dried for 7 days by high-frequency dryness. Adjustment of color tone to walnut color was conducted with multiple colorants and various number of spread times. Uniform color of yellow poplar on heartwood and sapwood was accomplished by applying 1 time stain (green), 2 times transparent primer, 1 time middle-painting (walnut), and 2 times top-painting (walnut) in sequentially. The painted yellow poplar board was used to manufacture table and dressing table. During the furniture manufacture process, no critical issues were occurred on part of jointing and painting. This painting method may be useful data for future use of yellow poplar as furniture materials.

• 한국산림과학회지
• /
• 제99권5호
• /
• pp.744-749
• /
• 2010

Enzymatic hydrolysate from non pre-treated biomass of yellow poplar (Liriodendron tulipifera) was prepared and used as resource for bioethanol production. Fresh branch (1 year old) of yellow poplar biomass was found to be a good resource for achieving high saccharification yields and bioethanol production. Chemical composition of yellow poplar varied significantly depending upon age of tree. Cellulose content in fresh branch and log (12 years old) of yellow poplar was 44.7 and 46.7% respectively. Enzymatic hydrolysis of raw biomass was carried out with commercial enzymes. Fresh branch of yellow poplar hydrolyzed more easily than log of yellow poplar tree. After 72 h of enzyme treatment the glucose concentration from Fresh branch of yellow poplar was 1.46 g/L and for the same treatment period log of yellow poplar produced 1.23 g/L of glucose. Saccharomyces cerevisiae KCTC 7296 fermented the enzyme hydrolysate to ethanol, however ethanol production was similar (~1.4 g/L) from both fresh branch and log yellow poplar hydrolysates after 96 h.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 추계학술대회
• /
• pp.182-195
• /
• 2000

Indigenous bacteria from poplar roots (Populus mnadensis var. eugenei, 'Imperial Carolina') and Southern Californian shrub rhizospheres as well as two tree-colonizing Rhizobium strains (ATCC 10320 and 35645) were genetically engineered to express constitutively and stably toluene o-monooxygenase (TOM) from Burkholderia cepacia G4 by integrating the torn locus into the chromosome. The poplar and Rhizobium recombinants degraded trichloroethylene (TCE) at 0.8-2.1 nmol/min.mg protein (initial TCE concentration, 10u M) and competitive against the unengineered hosts in wheat and barley rhizospheres for one month (colonization at 1-23 $\times$ 10$^{5}$ CFU/cm root). In addition, six of these recombinants colonized poplar roots stably and competitively with populations as high as 79 $\pm$ 12% of all rhizosphere bacteria after 28 days (0.2-31 $\times$ 10$^{5}$ CFU/cm root). Furthermore, five of the most-competitive poplar recombinants (e.g., Pb3-1 and Pb5-1 which were identified as Pseudomonas PsK) retained the ability to express TOM for 29 days as 100 $\pm$ 0% of the recombinants detected in the poplar rhizosphere had constitutive expression of TOM.

• Journal of the Korean Wood Science and Technology
• /
• 제38권6호
• /
• pp.470-479
• /
• 2010

본 연구는 국산 백합나무의 육안 특성을 이용한 등급구분과 실대재 휨시험을 실시하여 이들의 강도 및 강성의 특성 구명을 통해 국산 백합나무의 구조용재로서의 이용가능성을 평가하였다. 활엽수의 육안등급구분규정이 국내에 존재하지 않아 몇몇 활엽수 제재목에 대한 규정을 포함하고 있는 NSLB (Northern Softwood Lumber Bureau) 규정에 따라 육안등급을 수행하였다. 수행 결과로부터 계산된 백합나무의 휨허용응력을 NDS (National Design Specification)에 제시된 설계치와의 비교를 통해 국산 백합나무가 충분한 강도성능을 가지고 있음을 확인 하였다. 또한 백합나무 제재목을 국내 등급규정에 따라 허용응력을 산정하여 이를 적용하는 데 있어 타당성을 평가하기 위해 국내 국립산림과학원 고시에 따라 육안등급을 수행하였다. 백합나무는 국립산림과학원 고시에 제시된 비중에 따른 수종군 중 소나무류에 포함되었다. 적합분포로 판단된 웨이블분포에 따른 휨허용응력은 1등급 10.0 MPa, 2등급 7.4 MPa, 3등급 4.1 MPa로 제시된 설계치보다 높은 값이 나타났다. 본 실험의 결과로부터 국내 규정에 준하여 국산 백합나무를 구조용재로 이용이 가능함을 확인하였다. 국산 백합나무의 휨탄성계수는 국내외 기준 설계치를 모두 충족시키지 못하였으나, 국산백합나무를 구조용재로 이용하기 위해 본 실험을 통해 얻어진 백합나무의 평균 휨탄성계수를 제안하되, 1등급과 2등급은 9,000 MPa, 3등급 이하는 8,000 MPa를 적용 하는 것이 타당한 것으로 보인다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.252-254
• /
• 2004

In the past several years phytoremediation, defined as the use of plants for removing contaminants from media such as soils or water, has attracted a great deal of interest as a potentially useful remediation technology. In this study, we have attempted to asses the effectiveness of phytoremeidation of disel contaminate soils using hybrid poplar species. 3 poplar species had removed disel from soil effectively and toxic effect was also observed over 2500mg/kg disel contaminated soil, which indicating reducing disel removal.

• 한국환경복원기술학회지
• /
• 제10권5호
• /
• pp.40-50
• /
• 2007

One-year-old rooted cuttings of ten poplar clones and one willow clone were planted in a riparian area in Osan. Survival rate, growth performance, biomass, vitality, defoliation, leaf damages by diseases and/or insects and stem borer damage of the poplar and willow clones have been investigated for three growing seasons. Average survival rate of all eleven clones was declined from 80.7% for the first year to 60.7% for the third year. At three years after planting, poplar clones Dorskamp, ST-148 and Eco-28 showed the best survival rate of 80%. For height and DBH growth, the poplar clone Ay-48 and the willow clone 131-25 were the highest 8.3m and 9.5cm, respectively. However, poplar clones 72-30 and 72-31 were lower than those of the other clones. Clones Ay-48 and 131-25 seemed to have strong vitality when compare to the other clones. No serious damages by diseases and insects were found in most clones. Clones Ay-48 and ST-148 were the most tolerant to various diseases and insects. Clone Ay-48 produced the largest biomass for individual and annual total biomass, 22.5kg and 18.7ton $ha^{-1}$, respectively. Clone Dorskamp showed the best adaptability, which was estimated with survival rate, biomass and damages by various diseases and insects in the riparian area and followed by clones Ay-48, 97-19 and Eco-28. As a consequence, the four clones seemed to be the best candidate poplar clones for the establishment of riparian woody buffer.

• 한국농공학회논문집
• /
• 제64권2호
• /
• pp.57-69
• /
• 2022

This study analyzes the fuel conditions and environmental effects of converting heating in rural villages that rely on fossil fuels into wood fuel. In particular, we tried to derive the most important considerations when using wooden chips as fuel in aging agricultural villages where various variables such as weather, facility characteristics, fuel quality, and maintenance capabilities work. Above all, an experiment was conducted by comparing it with oak trees to determine whether Italian poplar, a representative attribute water created to supply fuel wood in Korea, is suitable for heating fuel. Through experiments, 1) Even though the supply of poplar wood chips during 10 hours of operation was 60.74 kg less than that of hardwood chips, the production of hot water was 140 kWh higher. 2) The higher the exhaust gas temperature, the proportional (increase) oxygen concentration and inversely (decrease) PM and CO emissions. 3) Poplar has twice as much ash content as hardwood and three times more fine dust has been detected, but it meets all the standards for wood quality at the Korea Forest Science Institute. 4) Under the condition that there is a difference in water content (7.7%), hardwood cost 1.13 times more wood chips per 1 MWh than poplar, and even if the water content is corrected equally, hardwood cost 1.05 times more per 1 MWh than poplar. 5) In conclusion, it was proved that the fuel possibility, economic possibility, and environmental possibility of poplar wood chips are sufficient.

• 한국가구학회지
• /
• 제21권1호
• /
• pp.54-61
• /
• 2010

This study was carried out to identify the differences of some macro and microanatomical features between Eunsasi poplar (Populus tomentiglandulosa T. Lee) and Konara oak (Quercus serrata Thunb.). Anatomical features such as vessel and fiber diameter, cross sectional area of ray parenchyma and endwall pit aperture diameter in ray parenchyma were compared. Differences of anatomical features between two species were found statistically significant. Earlywood vessel diameter in poplar and oak increased from pith to bark while it was found almost stable in latewood. Fiber diameter in poplar was higher than oak fiber. Ray area and the pit aperture diameter in endwall of ray parenchyma were found higher in oak than those in poplar.