• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.1
• /
• pp.49-56
• /
• 2011

The neck injury occupies the most of injury that happened by the rear impact car accident. This study was analyzed about influence of the neck injury in low speed rear impact and car crash accident investigation. There is no neck injury in low speed side rear impact. On the other hand, there is initial neck injury symptom of 10 % but no long-term neck injury symptom in low speed offset rear impact. It appeared that the possibility of neck injury in low speed rear impact is low. For the more study about the neck injury, it should be evaluate the effects of the car body structure, frame structure and rear crash pattern.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.20-24
• /
• 2010

The position of the automobile's head restraint is very important for the neck injury in rear end collision. This study is about influence of the head restraint height and distance on neck injury during rear end collision. The effects of the position have been evaluated experimentally. The neck injuries are calculated by the relative acceleration between the upper and lower neck. As a result, It is found that the head restraint should be close enough to the back of the head and high enough to the top of the head.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.893-894
• /
• 2012

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.5
• /
• pp.134-139
• /
• 2003

The car crash accidents in low speed occurs most frequently. Damage on a conventional bumper after the car accident causes the bumper to get fixed most of time. This study shows how a gas tube bumper reduces a damageability and increase repairability after the car accidents. The 15 km/h 40% offset front and rear crash test recommended by RCAR (Research council for automobile repairs) standard was performed and evaluated damages on the gas tube bumper by the pendulum impact tester. In this study, the gas tube bumper reduces damageability and increases repairability after car crash accidents. In addition, car frame design to apply the gas tube bumper may consider to be changed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.104-113
• /
• 2013

New USNCAP has been carried out by NHTSA including front and side crash from MY2011. In this paper, test results for USNCAP Side crash were reviewed by statistical analysis. This review focused on side crash test results to investigate the effect of changes from new USNCAP side crash test protocol among 30 passenger cars. These results were summarized as followings. Total number of 5 star vehicles on the front seat dummy (16 vehicles, 53.3%) was slightly smaller than the rear seat's (17 vehicles, 56.7%) in MDB test. For the ES-2re dummy, chest injury, ie maximum rib deflection contributed to 66% in the mean value of $P_{joint}$. Pelvis injury was highly dependent upon performance up to 87% in the SID-IIs dummy cited on the rear seat in average $P_{joint}$. For Pole test, pelvis injury made contribution to the average performance to 83%. For standard deviation, it showed the largest value in the same body region as the mean value for each dummy. Overall front seat performance showed 14 vehicles, 44.6% with 5 star vehicles less than each MDB or Pole test result. This result showed that performances in MDB test were different pattern to Pole test on driver position. Number of 5star vehicles for overall side NCAP performance are 18 passenger cars (60%). Curtain airbag and driver thorax airbag were equipped in all test vehicles. One vehicle is equipped with thorax airbag in the rear seat. Results from two side tests considered as reliability problem, ie the cause for large standard deviation in side crash test. Consequently, the countermeasure for new USNCAP side crash test is essential to design the effective side structures for side collision and to control well dummy kinematics with curtain and thorax airbag in order to reduce chest and pelvis injuries.

• Journal of Auto-vehicle Safety Association
• /
• v.9 no.3
• /
• pp.13-18
• /
• 2017

Since 2015, Euro-NCAP and C-NCAP have enhanced regulation on submarine of rear female passenger. This submarine regulation is a big obstacle to achieve the highest level crash performance. So the objective of this study is to develop new technical way to protect rear female passenger against submarine. In this study, we figured out how design factors of seatbelt affect submarine of rear female passenger by sled test. And we verified that rear passenger submarine can be improved by increasing intersection angle of seatbelt anchor and rotation amount of seatbelt buckle. Based on these results, this paper proposes a new invention of seatbelt buckle and anchor that can improve rear passenger submarine. One is seatbelt buckle that can be detached from stopper to prevent rotation and the other is seatbelt anchor that can be changed the structure so as to incline forward during crash. Finally we proved that submarine of rear female passenger can be improved by the effectiveness of new inventions.

• Journal of Mechanical Science and Technology
• /
• v.14 no.11
• /
• pp.1232-1243
• /
• 2000

Motor vehicle accidents in rear impacts cause more than fifty percents of drivers to suffer from neck injuries. It is known that most neck injuries are associated with rear-end collisions at a speed lower than 32 km/h and between the Abbreviated Injury Scale (AIS) 1 and AIS 2. Two different types of low speed crash tests such as the frontal barrier and rear moving barrier crashes have been conducted by following the procedure of the Research Committee for Automobile Repairs (RCAR). The injury for the neck and the Head Injury Criteria (HIC) were measured by using the sensors mounted on dummies. We reviewed neck injures and the relationship between the neck and head injuries, and examined the deceleration of the body. Using the experimental test data at the neck, we investigated an improved neck injury criterion Nij. Also, the effects of the position of a head restraint on reducing the frequency and severity of the neck injury in rear-end collisions were investigated.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.5
• /
• pp.29-34
• /
• 2005

141,841 car-to-car collision had occurred in 2003, and among the accidents 51,796 were rear-end impact. According to insurance company for loss or damage, more than $60\%$ of rear-end impact victims suffer neck injury. This means at least 31,000 neck injury victims have happened in 2003. More than $97\%$ of the neck injury victims have low severity injury than A.I.S 2. Head restraint, which is designed to limit rearward head movement and equipped on seat, can considerably protect neck from rear-end impact. In this paper we evaluated head restraint geometry and drivers' sitting position according to RCAR standard and carried out low speed volunteer crash test. The crash speed is 4km/h and N.I.C value is used to determine injury probability. Through these research results we can introduce the method to prevent neck injury at rear-end impact.

• Journal of Auto-vehicle Safety Association
• /
• v.12 no.4
• /
• pp.39-47
• /
• 2020

In this study, crash situations of representative bus crash types were elicited by analyzing a total of 1,416 bus repair record which were collected in 2018~2019. K-means clustering was used as a methodology for this study. Bus repair record contain the information of repair term, type of bus operation, responsibility of accident, weather condition, road surface condition, type of accident, other party, type of road and type of location for each data. Also, by checking collision parts of each bus repair record, each record was classified by types of collision regions. From this, 760 record are classified to frontal type, 363 record are classified to middle-frontal type, 374 record are classified to middle-rear type and 331 record are classified to rear type. As mentioned, k-means clustering was performed on each type of collision parts. As a result, this study analyzed the severity of bus crash based on actual bus accident data which are based on bus repair record not the crash data from the TAAS. Also, this study presented crash situation of representative bus crash types. It is expected that this study can be expanded to analyzing hydrogen bus crash and defining indicators of hydrogen bus safety.

• Journal of Korean Society of Transportation
• /
• v.29 no.3
• /
• pp.73-82
• /
• 2011

Recent advancement in traffic surveillance systems has allowed the researchers to obtain more detailed vehicular movement such as individual vehicle trajectory data. Understanding the characteristics of interactions between leading and following vehicles in the traffic flow stream is a backbone for designing and evaluating more sophisticated traffic and vehicle control strategies. This study proposes a methodology for estimating rear-end crash potential, as a probabilistic measure, in real-time based on the analysis of vehicular movements. The methodology presented in this study consists of three components. The first predicts vehicle position and speed every second using a Kalman filtering technique. The second estimates the probability for the vehicle's trajectory to belong to either 'changing lane' or 'going straight'. A binary logistic regression (BLR) is used to model the lane-changing decision of the subject vehicle. The other component calculates crash probability by employing an exponential decay function that uses time-to-collision (TTC) between the subject vehicle and the front vehicle. The result of this study is expected to be adapted in developing traffic control and information systems, in particular, for crash prevention.