• 제목/요약/키워드: small data scattering

검색결과 54건 처리시간 0.027초

양상태 해수면 음파산란 측정 (Measurements of Bistatic Sea Surface Scattering Signals)

  • 최지웅;나정열;나영남
    • 한국음향학회지
    • /
    • 제20권4호
    • /
    • pp.81-86
    • /
    • 2001
  • 126-kHz양상태 해수면 음파산란 측정을 강원도 삼척시 연안에서 수행하였다. 수평입사각을38%, 52%로 고정시킨 상태에서 트랜스듀서와 청음기의 거리를 변화시키면서 산란각의 변화에 따른 전방산란 신호의 변화를 관찰하였다. 해저면 산란신호와는 달리 해수면 산란신호는 해수면 유동성에 의해서 도달시간 변이와 진폭의 변이를 나타내었으며 신호간의 상관관계도 불규칙적인 경향을 나타내었다. 전방산란강도를 계산하여 Kirchhoff approximation (KA)과 small slope approximation (SSA)을 비교한 결과 두 모델 모두 실측치와 잘 일치하였다.

  • PDF

거제 내만해역에서의 고주파 양상태 해수면 음파산란 채널 측정 및 모의 (Measurement and simulation of high-frequency bistatic sea surface scattering channel in shallow water of Geoje bay)

  • 최강훈;김용빈;김시문;최지웅
    • 한국음향학회지
    • /
    • 제40권1호
    • /
    • pp.1-9
    • /
    • 2021
  • 해수면 상태에 따른 고주파 양상태 해수면 음파산란 채널 측정 실험은 2020년 4월 거제 내만해역에서 수행되었으며 산란이론을 기반으로 한 모의결과와 비교하였다. 신호는 중심주파수 128 kHz, 대역폭 32 kHz의 선형 주파수 변조 신호를 이용하였다. 파고부이를 통해 측정된 해수면 거칠기로부터 해수면 파수 스펙트럼을 계산하였고 산란이론인 Small Slope Approximation(SSA)에 적용하여 해수면 거칠기에 의한 산란강도를 추정하였다. 또한 실험 당시 풍속을 이용하여 해수면 부근 공기방울층 음파산란을 고려하여 산란강도를 계산하였다. 모의된 산란강도를 이용하여 해수면 산란 채널 세기 임펄스 응답을 모의하였고, 해수면 파수 스펙트럼과 공기방울층 산란에 따른 모의결과를 측정치와 비교, 분석하였다.

SMALL DATA SCATTERING OF HARTREE TYPE FRACTIONAL SCHRÖDINGER EQUATIONS IN DIMENSION 2 AND 3

  • Cho, Yonggeun;Ozawa, Tohru
    • 대한수학회지
    • /
    • 제55권2호
    • /
    • pp.373-390
    • /
    • 2018
  • In this paper we study the small-data scattering of the d dimensional fractional $Schr{\ddot{o}}dinger$ equations with d = 2, 3, $L{\acute{e}}vy$ index 1 < ${\alpha}$ < 2 and Hartree type nonlinearity $F(u)={\mu}({\mid}x{\mid}^{-{\gamma}}{\ast}{\mid}u{\mid}^2)u$ with max(${\alpha}$, ${\frac{2d}{2d-1}}$) < ${\gamma}{\leq}2$, ${\gamma}$ < d. This equation is scaling-critical in ${\dot{H}}^{s_c}$, $s_c={\frac{{\gamma}-{\alpha}}{2}}$. We show that the solution scatters in $H^{s,1}$ for any s > $s_c$, where $H^{s,1}$ is a space of Sobolev type taking in angular regularity with norm defined by ${\parallel}{\varphi}{\parallel}_{H^{s,1}}={\parallel}{\varphi}{\parallel}_{H^s}+{\parallel}{\nabla}_{{\mathbb{S}}{\varphi}}{\parallel}_{H^s}$. For this purpose we use the recently developed Strichartz estimate which is $L^2$-averaged on the unit sphere ${\mathbb{S}}^{d-1}$ and utilize $U^p-V^p$ space argument.

Wavelet 변환의 전자기학적 응용 (Application of wavelet transform in electromagnetics)

  • Hyeongdong Kim
    • 전자공학회논문지A
    • /
    • 제32A권9호
    • /
    • pp.1244-1249
    • /
    • 1995
  • Wavelet transform technique is applied to two important electromagnetic problems:1) to analyze the frequency-domain radar echo from finite-size targets and 2) to the integral solution of two- dimensional electromagnetic scattering problems. Since the frequency- domain radar echo consists of both small-scale natural resonances and large-scale scattering center information, the multiresolution property of the wavelet transform is well suited for analyzing such ulti-scale signals. Wavelet analysis examples of backscattered data from an open- ended waveguide cavity are presented. The different scattering mechanisms are clearly resolved in the wavelet-domain representation. In the wavelet transform domain, the moment method impedance matrix becomes sparse and sparse matrix algorithms can be utilized to solve the resulting matrix equationl. Using the fast wavelet transform in conjunction with the conjugate gradient method, we present the time performance for the solution of a dihedral corner reflector. The total computational time is found to be reduced.

  • PDF

Crystallization Behavior of Polymers as Viewed from the Molecular Level

  • Tashiro, Kohji;Sasaki, Sono;Ueno, Yoko;Yoshioka, Akiko;Kobayashi, Masamichi
    • Macromolecular Research
    • /
    • 제8권3호
    • /
    • pp.103-115
    • /
    • 2000
  • The structural changes viewed from the molecular level have been investigated for the isothermal crystallization phenomena of polyethylene (PE) and the solvent-induced crystallization phenomenon of syndiotactic polystyrene (sPS) glassy sample. The data, which were collected by the time-resolved measurements of Fourier-transform infrared spectra, Raman spectra, synchrotron-sourced small-angle X-ray scattering, wide-angle X-ray scattering, and so on, were combined together to extract the detailed structural information in these phase transition phenomena. In the case of PE, the isothermal crystallization from the melt to the orthorhombic form was found to occur via the conformationally-disordered trans chain form, followed by the formation of the lamellar stacking structure of regular orthorhombic-type crystals. In the case of sPS, the amorphous chains in the glassy sample were found to enhance the mobility through the interaction with the injected solvent molecules, which act as a trigger to cause the conformational ordering from the random coil to the regular T$_2$G$_2$-type helical form. The thus created short helical segments were found to grow into longer helices, which gathered together to form the crystallites, as revealed by the organized coupling of the infrared, Raman and X-ray scattering data.

  • PDF

APPLICATION OF THE BIFOCUSING METHOD IN MICROWAVE IMAGING WITHOUT BACKGROUND INFORMATION

  • SEONG-HO SON;WON-KWANG PARK
    • Journal of the Korean Society for Industrial and Applied Mathematics
    • /
    • 제27권2호
    • /
    • pp.109-122
    • /
    • 2023
  • In this study, we consider the application of the bifocusing method (BFM) for identifying the locations and shapes of small anomalies from scattering parameter data when the exact values of background permittivity and conductivity are unknown. To this end, an imaging function using numerical focusing operator is introduced and its mathematical structure is revealed by establishing a relationship with an infinite series of Bessel functions, antenna arrangements, and anomaly properties. On the basis of the revealed structure, we demonstrate why inaccurate location and size of anomalies were retrieved via the BFM. Some simulation results are illustrated using synthetic data polluted by random noise to support the theoretical result.

불규칙적으로 거친 유전체 표면에서의 레이더 산란계수 수치해석적 계산 (Numerical Computation of Radar Scattering Coefficient for Randomly Rough Dielectric Surfaces)

  • 차형준;오이석
    • 대한원격탐사학회지
    • /
    • 제16권1호
    • /
    • pp.65-72
    • /
    • 2000
  • 본 논문에서는 불규칙적으로 거친 유전체 표면에서의 레이더 산란계수를 FDTD 방법과 Monte Carlo 방법을 이용하여 계산하였다. 본 연구의 FDTD 방법에서는 입사파의 입사각과 편파를 바꾸어 가며 전파 산란을 계산할 수 있으며, thin wire의 RCS를 이 FDTD 방법을 이용해 계산하여 본 알고리즘을 검증하였다. 2차원적으로 거친 표면에서의 전파산란을 연구하기 위해 우선 주어진 표면 높이 분포가 Gaussian 상관함수를 갖는. 2차원적으로 거친 표면을 컴퓨터로 생성하였다. Maxwell 방정식을 차등 방정식으로 바꾼 후 계산 영역은 total field 영역과 scattered field 영역으로 나누어 FDTD를 이용해서 거친 표면 조각들에서의 산란 전계를 계산했다. 통계적으로 독립적인 50개의 표면 조각들에서 계산된 산란 전계를 이용해 레이더 후방산란계수를 구하였으며, 이 결과를 이론적 모델 중의 하나인 SPM과 비교해 보았다. FDTD 방법을 이용해 얻은 결과와 SPM을 이용해 얻은 결과가 대체적으로 잘 일치하였다.

저온에서의 La2.1Sr1.9Mn3O10 세라믹스의 열기전력 특성 (Low Temperature Thermoelectric Power Properties in La2.1Sr1.9Mn3O10 System)

  • 정우환
    • 한국세라믹학회지
    • /
    • 제40권9호
    • /
    • pp.849-854
    • /
    • 2003
  • 80-373 K의 온도범위에서 La$_{2.1}$ Sr$_{1.9}$ Mn$_3$O$_{10}$ 의 열기전력의 온도의존성을 조사하였다. 저온강자성영역에서 열기전력(S)의 온도의존성은 광범위한 온도영역에서 S=S$_{0}$ +S$_{1.5}$ T$^{1.5}$ +S$_4$T$^4$로 표현할 수 있었다. 강자성 전이온도 이하에서 열기전력의 완만한 피크 및 복잡한 온도의존성은 편력성 강자성체에서 예상되는 electron-magnon 산란으로 이해할 수 있으며, 고온에서의 열기전력은 Mott의 small polaron hopping 모델로 설명 가능하였다.

Current Status of the Synchrotron Small-Angle X-ray Scattering Station BL4C1 at the Pohang Accelerator Laboratory

  • Jorg Bolze;Kim, Jehan;Huang, Jung-Yun;Seungyu Rah;Youn, Hwa-Shik;Lee, Byeongdu;Shin, Tae-Joo;Moonhor Ree
    • Macromolecular Research
    • /
    • 제10권1호
    • /
    • pp.2-12
    • /
    • 2002
  • The small-angle X-ray scattering (SAXS) beamline BL4C1 at the 2.5 GeV storage ring of the Pohang Accelerator Laboratory (PAL) has been in its first you of operation since August 2000. During this first stage it could meet the basic requirements of the rapidly growing domestic SAXS user community, which has been carrying out measurements mainly on various polymer systems. The X-ray source is a bending magnet which produces white radiation with a critical energy of 5.5 keV. A synthetic double multilayer monochromator selects quasi-monochromatic radiation with a bandwidth of ca. 1.5%. This relatively low degree of monochromatization is sufficient for most SAXS measurements and allows a considerably higher flux at the sample as compared to monochromators using single crystals. Higher harmonics from the monochromator are rejected by reflection from a flat mirror, and a slit system is installed for collimation. A charge-coupled device (CCD) system, two one-dimensional photodiode arrays (PDA) and imaging plates (IP) are available its detectors. The overall performance of the beamline optics and of the detector systems has been checked using various standard samples. While the CCD and PDA detectors are well-suited for diffraction measurements, they give unsatisfactory data from weakly scattering samples, due to their high intrinsic noise. By using the IP system smooth scattering curves could be obtained in a wide dynamic range. In the second stage, stating from August 2001, the beamline will be upgraded with additional slits, focusing optics and gas-filled proportional detectors.

SAXS와 AFM에 의한 HF-용액내 양극 에칭에 의해 제조된 기공성 실리콘의 구조연구 (SAXS and AFM Study on Porous Silicon Prepared by Anodic Etching in HF-based Solution)

  • 김유진;김화중
    • 한국전기전자재료학회논문지
    • /
    • 제17권11호
    • /
    • pp.1218-1223
    • /
    • 2004
  • Porous silicon materials have been shown to have bright prospects for applications in light emitting, solar cell, as well as light- and chemical-sensing devices. In this report, structures of porous silicon prepared by anodic etching in HF-based solution with various etching times were studied in detail by Atomic Force Microscopy and Small Angle X -ray Scattering technique using the high energy beam line at Pohang Light Source in Korea. The results showed the coexistence of the various pores with nanometer and submicrometer scales. For nanameter size pores, the mixed ones with two different shapes were identified: the larger ones in cylindrical shape and the smaller ones in spherical shape. Volume fractions of the cylindrical and the spherical pores were about equal and remained unchanged at all etching times investigated. On the whole uniform values of the specific surface area and of the size parameters of the pores were observed except for the larger specific surface area for the sample with the short etching time. The results implies that etching process causes the inner surfaces to become smoother while new pores are being generated. In all SAXS data at large Q vectors, Porod slope of -4 was observed, which supports the fact that the pores have smooth surfaces.