• 한국구조물진단유지관리공학회 논문집
• /
• 제12권1호
• /
• pp.91-100
• /
• 2008

다단계 온도프리스트레싱 공법은 기존의 프리스트레싱 공법과 단면접합공법의 장점을 이용한 새로운 개념의 프리스트레싱 공법으로 프리스트레싱용 커버플레이트를 다단계로 가열하여 거더의 하부플랜지에 고장력볼트로 접합한 뒤, 열원을 제거하여 발생하는 다단계 수축력을 보강에 필요한 프리스트레싱력으로 이용한 공법이다. 본 연구는 다단계 온도프리스트레싱 공법의 실제적인 적용성 평가를 위하여 다단계 가열을 위한 가열 장비의 가열성능 평가 실험을 실시하였으며, 라멘형 강거더 임시교량을 제작하고 다단계 온도프리스트레싱 공법을 적용하여 도입 프리스트레싱력을 확인하였다. 또한, 트럭을 이용한 하중재하 실험을 실시하여 구조해석 결과와 비교하였다.

• 한국강구조학회 논문집
• /
• 제18권6호
• /
• pp.783-792
• /
• 2006

본 연구는 압연형강이나 조립형강과 같은 강구조물의 지간증가나 하중 증가로 큰 휨강성이 필요한 경우 상부플랜지나 하부플랜지에 부착하여 구조물의 하중저항성능을 향상시켜주는 커버플레이트의 온도변형을 이용한 프리스트레싱 도입 방법의 개발에 관한 것으로 다단계 온도변형이 도입된 커버플레이트를 프리스트레싱 도입을 위한 구조물에 강결한 후 커버플레이트의 수축으로 발생하는 다단계 수축력을 프리스트레싱력으로 이용하는 방법이다. 본 연구에서는 온도변형에 의하여 구조물에 도입되는 프리스트레싱력의 이론적 연구와 다단계 온도변형을 이용한 다단계 프리스트레싱 기법의 도입을 위하여 커버플레이트의 다단계 온도분포에 대한 열전달 이론해의 제시와 H형강을 대상으로 다단계 온도변형에 의한 다단계 프리스트레스 도입 효과를 분석하였다.

• 대한수학회보
• /
• 제59권2호
• /
• pp.507-528
• /
• 2022

We propose a path integral method to construct a time stepwise local volatility for the stock index market under Dupire's model. Our method is focused on the pricing with the Monte Carlo Method (MCM). We solve the problem of randomness of MCM by applying numerical integration. We reconstruct this task as a matrix equation. Our method provides the analytic Jacobian and Hessian required by the nonlinear optimization solver, resulting in stable and fast calculations.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.949-952
• /
• 2002

A regression model is used in predicting the response variable given predictor variables However, in case of large number of predictor variables, a regression model has some problems such as multicollinearity, interpretation of the functional relationship between the response and predictors and prediction accuracy. A clustering method and stepwise regression could be used to reduce the amount of data by grouping predictors having similar properties and by selecting the subset of predictors. respectively. This paper proposes a prediction method combining clustering method and stepwise regression. The proposed method fits a global model and local models and predicts responses given new observations by using both models. The paper also compares the performance of proposed method with stepwise regression via a real data of ample obtained in a steel process.

• 품질경영학회지
• /
• 제47권1호
• /
• pp.33-46
• /
• 2019

Purpose: This study proposed a DEA (Data Envelopment Analysis)-based stepwise benchmarking target selection for inefficient DMU (Decision Making Unit) to improve its efficiency gradually to reach most efficient frontier considering resource (DEA inputs and outputs) improvement preferences. Methods: The proposed method proceeded in two steps. First step evaluates efficiency of DMUs by using DEA, and an evaluated DMU selects benchmarking targets of HCU (Hypothesis Composit Unit) or RU (Real Unit) considering resource improvement preferences. Second step selects stepwise benchmarking targets of the inefficient DMU. To achieve this, this study developed a new DEA model, which can select a benchmarking target of an inefficient DMU in considering inputs or outputs improvement preference, and suggested an algorithm, which can select stepwise benchmarking targets of the inefficient DMU. Results: The proposed method was applied to 34 international ports for validation. In efficiency evaluation, five ports was evaluated as most efficient port, and the remaining 29 ports was evaluated as relative inefficient port. When port 34 was supposed as evaluated DMU, its can select its four stepwise benchmarking targets in assigning the preference weight to inputs (berth length, total area of pier, CFS, number of loading machine) as (0.82, 1.00, 0.41, 0.00). Conclusion: For the validation of the proposed method, it applied to the 34 major ports around the world and selected stepwise benchmarking targets for an inefficient port to improve its efficiency gradually. We can say that the proposed method enables for inefficient DMU to establish more effective and practical benchmarking strategy than the conventional DEA because it considers the resource (inputs or outputs) improvement preference in selecting benchmarking targets gradually.

• Archives of Pharmacal Research
• /
• 제11권2호
• /
• pp.99-113
• /
• 1988

Quantitation of ethenzamide, isopropylantipyrine and caffeine takes about 41 hrs by conventional GC method. Quantitation of allylisoprorylacetylurea takes about 40 hrs by conventional UV method. But quantitation of them takes about 6 hrs by DRIFT developing method. Each standard and sample sieved, powdered and acquired DRIFT spectrum. Out of them peak of each component was selected and ratio of each peak to standard peak was acquired, and then linear stepwise multiple regression was performed with these data and concentration. Reflectance value, Kubelka-Munk equation and Inverse-Kubelka-Munk equation were modified by us. Inverse-Kubelka-Munk equation completed the deficit of Kubelka-Munk equation. Correlation coefficients acquired by conventioanl GC and UV against DRIFT were more than 0.95.

• Transactions on Electrical and Electronic Materials
• /
• 제9권4호
• /
• pp.137-142
• /
• 2008

The parasitic resistance is studied to silicon/metal contact junction for improving device performance and to lower contact/serial resistance silicide in natural sequence. In this paper constructs the stepwise Ni silicide process for parasitic resistance reduction for silicon/metal contact junction. We have investigated multi-step Ni silicide on SiGe substrate with stepwise annealing method as an alternative to compose more thermally reliable Ni silicide layer. Stepwise annealing for silicide formation is exposed to heating environment with $5^{\circ}C/sec$ for 10 seconds and a dwelling for both 10 and 30 seconds, and ramping-up and the dwelling was repeated until the final annealing temperature of $700\;^{\circ}C$ is achieved. Finally a direct comparison for single step and stepwise annealing process is obtained for 20 nm nickel silicide through stepwise annealing is $5.64\;{\Omega}/square$ at $600\;^{\circ}C$, and it is 42 % lower than that of as nickel sputtered. The proposed stepwise annealing for Ni silicidation can provide the least amount of NiSi at the interface of nickel silicide and silicon, and it provides lower resistance, higher thermal-stability, and superior morphology than other thermal treatment.

• 대한교통학회지
• /
• 제34권6호
• /
• pp.570-579
• /
• 2016

Stepwise 환승계수(이하 STC)는 환승회수 증가에 따라 환승비용을 실제보다 많게 인식하도록 한다. 통행시간과 최소환승회수 정보를 제공하는 것은 이러한 경향을 감안하는 취지이다. STC가 포함된 경로탐색문제는 비가산성비용을 포함하며 최적조건의 비성립으로 경로열거가 요구된다. 따라서 대중교통망에서 STC를 고려하는 경로탐색에 대한 이론적 검토를 통해서 경로탐색의 실패를 우회하는 방안이 요구된다. 본 연구는 STC가 포함되는 대중교통망에서 확률적 통행배정모형에 대하여 검토한다. 비가산성 경로문제를 완화하는 방안으로 유입링크기반 전체경로삭제기법을 활용하는 방안을 제안한다. 전체경로삭제기법은 출발지에서 도착지까지 서로 상이한 경로의 구성된 가능경로집합을 구축하기 용이하다. STC를 반영한 경로기반 Logit 모형을 대중교통통행배정기법으로 구축한다.

• 한국수소및신에너지학회논문집
• /
• 제28권1호
• /
• pp.98-105
• /
• 2017

In recent years, compression ignition engine has been equipped with some control devices such as common rail injection system and turbocharger. In order to control the large number of input parameter appropriately in consideration of $NO_x$, HC and engine power as the engine output objectives. The model construction which reproduces the characteristic value of $NO_x$, HC and engine power from input parameter is needed. In this research, the stepwise method was applied to construct the compression ignition engine model. By using the preliminary experimental data of single cylinder compression ignition engine, the prediction model of $NO_x$, HC and engine power on single injection compression ignition engine was built and compared with the main experimental data.

• Geomechanics and Engineering
• /
• 제18권3호
• /
• pp.225-234
• /
• 2019

A numerical stepwise approach for cavity expansion problem in strain-softening rock or soil mass is investigated, which is compatible with Mohr-Coulomb and generalized Hoek-Brown failure criteria. Based on finite difference method, plastic region is divided into a finite number of concentric rings whose thicknesses are determined internally to satisfy the equilibrium and compatibility equations, the material parameters of the rock or soil mass are assumed to be the same in each ring. For the strain-softening behavior, the strength parameters are assumed to be a linear function of deviatoric plastic strain (${\gamma}p^*$) for each ring. Increments of stress and strain for each ring are calculated with the finite difference method. Assumptions of large-strain for soil mass and small-strain for rock mass are adopted, respectively. A new numerical stepwise approach for limited pressure and plastic radius are obtained. Comparisons are conducted to validate the correctness of the proposed approach with Vesic's solution (1972). The results show that the perfectly elasto-plastic model may underestimate the displacement and stresses in cavity expansion than strain-softening coefficient considered. The results of limit expansion pressure based on the generalised H-B failure criterion are less than those obtained based on the M-C failure criterion.