• Journal of the Korean Society of Safety
• /
• v.21 no.2 s.74
• /
• pp.121-127
• /
• 2006

Nursing often requires heavy physical work activities such as lifting heavy loads, working in awkward postures, transferring patients, operating hazardous equipment, etc. Among various nursing tasks, patients transferring is one of the most physically demanding tasks. This study aims to investigate workload of the patients transferring, and to propose its improving methods for reducing high workload. The results showed that irrespective of methods for patients transferring and the number of workers involved, workload for most patients transferring tasks exceeded the action limit represented in terms of L5/SI compressive force of 3,400N or LI of 1.0 by NIOSH. The loads for some tasks were far larger than the maximum permissible limit of 6,400N. It is recommended that the mechanical devices for transferring patients such as ceiling crane, sling lift etc. should be introduced rather than simply increasing the number of workers in the tasks.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.2
• /
• pp.193-201
• /
• 2011

Clamp type transferring mechanism for package substrate's wet processes was newly developed instead of conventional roller type transferring mechanism. Clamp type transferring mechanism has the advantages of reducing the panel deflection and of minimizing the contact problem between the panel and the transferring mechanism. Individual clamp of the mechanism has two distinct mechanical functions which are perfectly fixing a panel during the transferring and generating adequate tension for the panel. To determine the mechanical parameters of the clamp, panel deflection simulation was conducted and the result was verified by the panel deflection measurement. Also, fixing angle of a clamp could be determined by the free body force analysis of individual clamp. Finally clamp type transferring mechanism was actually manufactured and the transferring performance was verified during the water spraying condition of the package substrate's wet processes.

• Journal of Korean Academy of Nursing
• /
• v.33 no.6
• /
• pp.722-730
• /
• 2003

Purpose: This study attempted to describe the essential structure of the lived experience of a students transferring into the nursing program. Method: The data was collected from 14 graduates and undergraduates who enrolled in nursing school as transfer student. The analysis of the data was made by phenominological analytic method suggested by Colaizzi(1978). Result: In this study, 6 essential themes were extracted: ‘Constant anxiety of being a stranger’, ‘Feeling of constant burden’, ‘Thankfulness of a clinical practice group’, ‘Being supportive with each other between transferring students’, ‘Pleasure of studying a desired major’, ‘Feeling the responsibility of own choice of a new major’, Conclusion: With rapidly increasing number of transferring students, the significance of this study in the field of nursing is that by understanding the transferring experience of nursing students, it describes the need of systematic and emotional support for transferring students.

• The Journal of Korean Physical Therapy
• /
• v.21 no.3
• /
• pp.119-124
• /
• 2009

Purpose: The National Institute for Occupational Safety and Health (NIOSH) lifting equation (NLE) is a useful tool to ergonomically analyze a workload. The NLE has high reliability and it can assess tasks by analyzing the work process. The purpose of this case study was to try using the NLE to analyze the workload of transferring patients by physical therapists in the hospital setting. Methods: We observed a physical therapist (PT) transferring patients from a wheelchair to a tilt table and a therapeutic table in one day. Two types of patient transferring methods were evaluated; (1) the manual single person method of stand, pivot and transfer, and (2) manual two person lifting under the thigh and grasping the waist for totally dependent patients. Results: The NIOSH lifting indexes of a person grasping the waist during the manual two person lifting were 5.52~4.48 according to the patient's weight. The NIOSH lifting indexes were 3.34 and 4.48 for the tasks performed by the manual single person method. Conclusion: Because transferring patients is not done very frequently, patients transferring tasks by a PT are not included as one of the musculoskeletal disorder related risky work criteria of the Korea Ministry of Labor. But the NIOSH lifting indexes of a person grasping the waist during the manual two person lifting and the manual single person method were over the NIOSH recommended weight limit threshold.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.2
• /
• pp.43-50
• /
• 2006

The purpose of this study was to investigate applicability of NIOSH lifting equation(NLE) to analysis of workload for patient transferring. In principle, the NLE is not applied to analyzing workload of patient transferring, because 1) the task is generally performed by two or more persons; 2) unlike ordinary objects, human body of patients is basically unstable load with their location of the center of mass significantly varying during lifting activity; and 3) the task is done in a restricted work space. This study was conducted through comparison of NIOSH lifting indexes(LIs) and L5/S1 compressive forces by 3DSSPP for patient transferring tasks performed by 2~6 persons. The results showed that LIs are linearly correlated with L5/S1 compressive forces with correlation coefficient of 0.92, which resulted in a significant simple linear regression equation for LIs and L5/S1 compressive forces. Consequently, it was concluded that the NLE is applicable to transferring patient only with slight modification. Based on the results, instead of 1.0 originally used by NIOSH, the LI of 1.5 was proposed as a gauge to estimate whether or not the task needs corrective action to reduce risk for developing lifting-related low back pain.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.4
• /
• pp.280-284
• /
• 2002

This paper presents computer simulations of the stacking and transferring system for the fast freeform fabrication system. The stacking and transferring system is essential for the fast freeform fabrication system and its stable motion is very important for consistent stacking of the cut slices. The stacking and transferring system can be modeled as a pneumatic system. The system consists of air compressor, the control valve, and the cylinder. The governing parameters have been changed and the simulation results are shown to predict the time response of the system. The results show some parameters should be correctly tuned to obtain stable system response.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.9
• /
• pp.873-882
• /
• 2004

Multimedia database system can be improve data transferring efficiency by consulting catalogue database which is storing the object and serving multimedia meta-database and perform the pre-scheduling for data transferring and by delaying of transferring to reduce the responding timeand reordering the data by various method of transferring. By Introducing these techniques we can enhance the server resources utilizing, minimizing the users responding time and can decrease failure at the scheduling itself and easily search and transfer the information that the user wanted. Like this, the importance of multimedia information treating skill and efficient management are widely recognized and expected lots of research and development to form a butter efficient multimedia database syst

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.916-919
• /
• 2004

This paper studied about the (100) orientation of PZT thin films coated on the LNO electrode using a different thermal annealing. The thermal annealing method is divided into two things. The one is the method transferring heat to only the lower substrate and another is transferring heat to all directions. Orientation factor of PZT in the method of transferring heat to only the lower substrate was F=99% in the thermal annealing of the LNO. Orientation factor of PZT was F=67% in the method of transferring heat to all directions.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12
• /
• pp.21-28
• /
• 2021

In this paper, a novel data transferring method is introduced that can transmit sensor data without using data bandwidth or an extra-processing cycle in a delay insensitive network. The proposed method uses human devices as Mules, does not disturb the device owner for permission, and saves energy while transferring sensor data to the collection hub in a wireless sensor network. This paper uses IP addressing technique as the data transferring mechanism by embedding the sensor data with the IP address of a Mule. The collection hub uses the ARP sequence method to extract the embedded data from the IP address. The proposed method follows WiFi standard in its every step and ends when data collection is over. Every step of the proposed method is discussed in detail with the help of figures in the paper.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.6
• /
• pp.816-824
• /
• 2010

The forces applying to an object in the transferring pipe of waste are analyzed and the equation of motion is established in this paper. It is shown that the equation of motion becomes the 1st order non-linear differential equation. Using its general solution, the velocity of the object in the transferring pipe of waste can be expressed in the explicit form. Noting that the velocity of object is impact velocity to the elbow or curved part of the transferring pipe of waste, the kinetic energy of the object can be calculated and the necessary impact strength of inner wall is obtained. The velocity of object is also calculated and presented in the graphic forms with the condition of air velocity 30m/sec. The impact test of cast basalt tube is carried out by the free fall of a weight and the test results show that the impact strength of the cast basalt tube is sufficient to apply to protecting inner wall of the transferring pipe of waste.