Synthesis of Cholesteric Liquid Crystal and Its Application as a Polarizing Component on the Optical Film

콜레스테릭 액정의 합성과 광학필름용 편광성분으로서의 응용

  • Kim, Yong-Suk (Regional Innovation Center for Environmental Technology of Thermal Plasma (ETTP), Inha University) ;
  • Lee, Kwang-Yeon (Regional Innovation Center for Environmental Technology of Thermal Plasma (ETTP), Inha University) ;
  • Ahn, Cheol-Heung (Shinwha Intertek Corporation) ;
  • Kim, Geon-Joong (Regional Innovation Center for Environmental Technology of Thermal Plasma (ETTP), Inha University)
  • 김용석 (인하대학교 생명화학공학부) ;
  • 이광연 (인하대학교 생명화학공학부) ;
  • 안철흥 (신화 인터텍(주)) ;
  • 김건중 (인하대학교 생명화학공학부)
  • Received : 2008.09.23
  • Accepted : 2008.09.29
  • Published : 2008.12.10

Abstract

In this study, cholesteric liquid crystal (CLC) was synthesized and applied as a polarizing component on the optical film of back light units (BLU) for LCDs. After mixing CLC with nematic liquid crystal, this mixture was fulfilled in the module consisting of two films and then its amplifying efficiency and polarizing ability for a planarly emitted light were examined to apply as a BLU polarizer film for increasing the brightness of light. The properties of CLC compound were tested by UV/Visible spectroscopy and polarizing optical microscopy (POM). Flexible spacer was made by linear carboxylic acid group of cholesteric derivatives between cholesterol mesogen units for one-axis orientation in each layer. The CLC containing film could be used as a module to increase the ability of polarization and to enhance brightness of BLU and to widen wavelength range by stacking the films.

본 연구에서는 LCD 백라이트용 휘도향상 편광필름으로 사용하기 위해, 콜레스테릭 액정(CLC)을 합성하여 네미틱 액정과 혼합한 다음 이들이 충진된 모듈을 제작하였다. 광확산필름에 의해 면광원화된 빛을 통과시킬 때, LCD 백라이트상에서 이들의 투과광 증폭 및 편광능력에 대한 특성을 연구하였다. 합성된 콜레스테릭 액정의 특성은 UV/Visible 스펙트럼과 편광현미경(POM) 등으로 평가하였다. 여러 종류의 선형 카르복실산을 콜레스테롤 분자에 도입하여 콜레스테릭 메소젠 사이의 유연격자를 이루도록 유도하여 각 층에서 일정한 방향성을 유지하도록 하였다. 또한 CLC필름을 적층하여 가시광선대에서 편광능력, 휘도향상 및 투과파장영역을 넓히고 백라이트 유니트의 밝기를 향상시키는 모듈로 적용할 수 있었다.

Keywords

References

  1. 김재훈, 전자부품, 테크월드, 7, 66 (2006).
  2. 최이준, 진정일 저, 액정고분자, 문운당 (2001).
  3. S. Pieraccini, A. Ferrarini, G. Gottarelli, S. Lena, S. Masiero, and G. P. Spada, J. Org. Chem., 70, 8009 (2005). https://doi.org/10.1021/jo051122i
  4. S. D. Jacobs, K. A. Cerqua, K. L. Marshall, M. J. Guardalben, and K. J. Skerrett, J. Opt. Soc. Am. B, 5, 1962 (1988). https://doi.org/10.1364/JOSAB.5.001962
  5. Y. J. Wang, M. Pei, P. Peng, and G. O. Carlisle, J Mater Sci: Mater Electron, 17, 385 (2006). https://doi.org/10.1007/s10854-006-7475-2
  6. K. R. Patent No.10-1998-0708060, (1998).
  7. J. H. Liu and P. C. Yang, Polymer, 47, 4925 (2006). https://doi.org/10.1016/j.polymer.2006.05.043
  8. Y. G. Jia, B. Y. Zhang, Q. J. Sun, and H. X. Chang, Colloid Polym. Sci., 282, 1077 (2004). https://doi.org/10.1007/s00396-003-1035-6
  9. J. S. Hu, B. Y. Zhang, W. Pan, Y. H. Li, and S. C. Ren, J. Appl. Polm. Sci., 99, 2330 (2006). https://doi.org/10.1002/app.22700
  10. J. H. Liu, P. C. Yang, Y. K. Wang, and C. C. Wang, Liquid Crystal, 33, 237 (2006). https://doi.org/10.1080/02678290600577971
  11. A. H. Hartwig, T. K. Mahato, T. Kaese, and D. Wohrle, Macromol. Chem. Phys., 206, 1718 (2005). https://doi.org/10.1002/macp.200500198
  12. J. H. Liu and P. C. Yang, Liquid Crystals, 32, 539 (2005). https://doi.org/10.1080/02678290500117654
  13. M. Mitov and N. Dessaud, Nature Materials, 5, 361 (2006). https://doi.org/10.1038/nmat1619
  14. T. Tixier, M. H. Butler, and E. M. Terentjev, Langmuir, 22, 2365 (2006). https://doi.org/10.1021/la0531953