한국산학기술학회논문지 (Journal of the Korea Academia-Industrial cooperation Society)

  • 제13권11호
  • /
  • Pages.5566-5571
  • /
  • 2012
  • /
  • 1975-4701(pISSN)
  • /
  • 2288-4688(eISSN)
한국산학기술학회 (The Korea Academia-Industrial cooperation Society)
권호 표지
DOI QR코드

DOI QR Code

볼트이음방식의 블록전단파괴에 미치는 영향에 대한 실험적 연구

An Experimental Study on the Effects of Bolted Connection Type on the Block Shear Failure

  • 이진옥 (충남대학교 토목공학과) ;
  • 박경현 (충남대학교 토목공학과) ;
  • 문지호 (고려대학교 건축사회환경공학부) ;
  • 이학은 (고려대학교 건축사회환경공학부) ;
  • 임남형 (충남대학교 토목공학과)
  • Lee, Chin-Ok (Department of Civil Engineering, Chungnam National University) ;
  • Park, Gyung-Hyeon (Department of Civil Engineering, Chungnam National University) ;
  • Moon, Jiho (School of Civil, Environmental & Architectural Engineering, Korea University) ;
  • Lee, Hak-Eun (School of Civil, Environmental & Architectural Engineering, Korea University) ;
  • Lim, Nam-Hyoung (Department of Civil Engineering, Chungnam National University)
  • 투고 : 2012.10.15
  • 심사 : 2012.11.08
  • 발행 : 2012.11.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

블록전단파괴는 인장부재의 한계상태에 해당하는 것으로 강구조물의 인장부재 또는 연결부 설계 시 주의를 요한다. 많은 연구 결과와 설계기준에서는 블록전단파괴에 대한 볼트 이음 방식의 영향을 고려하지 않고 있다. 본 연구에서는 볼트 이음 방식(지압이음과 마찰이음)이 블록전단파괴의 파괴모드와 파괴강도에 미치는 영향을 분석하고자 인장실험을 실시하였다. 실험결과의 분석으로부터 설계기준, 지압이음, 마찰이음에 따른 파괴모드의 차이를 제시하였으며 마찰이음에서 발생되는 마찰력으로 인한 블록전단파괴강도의 변화를 고찰하였다.

Block shear failure is one of limit states, and demands great caution in designing the tension member or connection joint of steel structures. From many studies and design specification, it is shown that the effect of the bolted connection type on the block shear failure was not considered. In order to investigate the effect of the bolted connection type(bearing type connection and slip critical connection) on the mode/strength of the block shear failure, tensile experiment is conducted in this study. Differences about the failure mode according to the design specification, bearing type connection, and slip critical connection are proposed from the analysis of test results. The variation of the block shear failure strength due to the frictional force in the slip critical connection is also investigated.

키워드

참고문헌

  1. Korea Road & Transportation Association, "Bridge Design Specification", Ministry of Land, Transport and Maritime Affairs, 2010.
  2. American Institute of Steel Construction(AISC), "Specification for structural steel buildings", AISC, 2005.
  3. European Committee for Standardization(ECS). "Eurocode 3: Design of Steel Structures (EN 1993-1 -8)", ECS, 2005.
  4. Birkemoe, P.C. and Gilmor, M.I., "Behavior of Be aring Critical Double-Angle Beam Connections", Engineering Journal, Vol. 15, No. 4, pp. 109-115, 1978.
  5. Ricles, J.M. and Yura, J.A., "Strength of Double- Row Bolted-Web Connections", Journal of the Structural Division, ASCE, Vol. 109, No. 1, pp. 126-142, 1983. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:1(126)
  6. Hardash, S.G. and Bjorhovde, R., "Gusset plate design utilizing block-shear concepts", M.S. Thesis, The University of Arizona, 1984.
  7. Epstein, H.I., "An Experimental Study of Block Shear Failure of Angles in Tension", Engineerin g Journal, AISC, VOl. 29, No. 2, pp. 75-84, 1992.
  8. Kulak, G.L. and Grondin, G.Y., "Block Shear Failure in Steel Members-A Review of Design Practice", Engineering Journal, AISC, Vol. 38, No. 4, pp. 199-203, 2001.
  9. Driver, R.G., et. al.,"A unified approach to design for block shear", Proc., Connections is Steel Structures V: Innovative Steel Connections, June 3-4, Amsterdam, The Netherlands, 2004.
  10. Lee Eun-Taik, et. al., "Block Shear Rupture and Shear Lag of Single Angle in Tension Joint -Single angle with two bolt connection-", Architectural Institute of Korea, Vol. 20, No. 11, p.p 19-26, 2004.
  11. Kim Tae-Soo, "A Study on Failure Mode and Ultimate Strength of Shear Bolted Connections in Cold-formed Steel", Architectural Institute of Korea, Vol. 23, No. 61, p.p 11-19, 2007.
  12. Korean Society of Steel Construction, "Design Specification of Steel Structure-LRFD", Ministry of Land, Transport and Maritime Affairs, 2009.
  13. Ministry of Land, Transport and Maritime Affairs, "Korean Building Code", MLTM, 2009.
  14. Canadian Standards Association, "Limit States Design of Steel Structures (CSA-S16-01)", CSA, Canada, 2001.
  15. Korean Standards Association, "Method of tensile test for metallic materials (KS B 0802)", KSA, 2003.