한국분무공학회지 (Journal of ILASS-Korea)

  • 제17권3호
  • /
  • Pages.146-151
  • /
  • 2012
  • /
  • 1226-2277(pISSN)
  • /
  • 2288-9051(eISSN)
한국분무공학회 (Institute for Liquid Atomization and Spray Systems-Korea)
권호 표지
DOI QR코드

DOI QR Code

후처리장치 부착에 따른 대형디젤엔진의 입자 배출특성

Particle Emission Characteristics of Heavy-duty Diesel Engine using Aftertreatment Systems

  • 권상일 (국립환경과학원 교통환경연구소) ;
  • 박용희 (국립환경과학원 교통환경연구소)
  • 투고 : 2012.09.03
  • 심사 : 2012.09.14
  • 발행 : 2012.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study was primarily focused on the experimental comparison of the particle emission characteristics for heavy duty engine. PM and particle number from various heavy duty engines and DPF type were analyzed with a golden particle measurement system recommended by the Particle Measurement Program. And the repeatability and reproducibility between test mode was analyzed. This study was conducted for the experimental comparison on particulate emission characteristics between the European and World-Harmonized test cycles for a heavy-duty diesel engine. To verify the particulate mass and particle number concentrations from various operating modes, ETC/ESC and WHTC/WHSC, both of which will be enacted in Euro VI emission legislation, were evaluated. Real-time particle formation of the transient cycles ETC and WHTC were strongly correlated with engine operating conditions and after-treatment device temperature. A higher particle number concentration during the ESC mode was ascribed to passive DPF regeneration and the thermal release of low volatile particles at high exhaust temperature conditions.

키워드

참고문헌

  1. Proposal for supplement 7 to the 05 series of amendments to regulation, No.83, 2008.
  2. J. Andersson, B. Giechaskiel, R. Munoz-Bueno, E. Sandbach and P. Dillara, "Particle measurement programme( PMP) light-uuty inter-laboratory correlation exercise(ILCE-LD) final report", 2007.
  3. J. Andersson and D. Clarke, "UN-GRPE PMP Phase3: inter-laboratory correlation exercise: updated framework and laboratory guide for heavy duty(HD) engine testing", A Document for the UK Department for Transport, 2008.
  4. J. Anderson, A. Mamakos and B. Gieschaskiel, "Particle measurement programme(PMP) heavy-duty interlaboratory correlation exercise(ILCE-HD) final report", 2010.
  5. M. Koebel, M Elsener and M. Kleemann, "Urea SCR: a promising technique to reduce $NO_x$ emissions from automotive diesel engines", Catalysis Today, Vol 59, No. 3, 2000, pp. 335-345. https://doi.org/10.1016/S0920-5861(00)00299-6
  6. W. C. Hinds, "Aerosol technology", John Wiley&Sons, New York, USA, 1999.
  7. H. Lee, S. Kwon, etc, "Diesel light duty vehicle interlaboratory correlation exercise by Korea particle measurement program to meet PM number regulations", KSAE09-B002, 2009, pp. 8-13.
  8. S. Kwon, Y. Park, J. Kim and C. Lee, "Effect of DPF regeneration on the nano particle emission of diesel passenger vehicle", KSAE, Vol. 15, No 3, 2007, pp. 153-159.
  9. K. Park, S. Kwon, W. Lee and J. Hong, "Emission characteristics of ultrafine particles according to fuel injection type in gasoline and LPG vehicle", Ilass korea, Vol. 14, No 4, 2009, pp. 184-189.
  10. J. Andersson, B. Giechaskiel, M. Carriero and G. Martini, "Heavy duty particle measurement programme (PMP): exploratory work for the definition of the test protocol", SAE 2009-01-1767, 2009.