Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

Increase heat dissipation efficiency of Al plate according to surface roughness treatment by sandpaper or sandblast

사포, 샌드블라스트로 표면 거칠기 처리에 따른 알루미늄 판의 방열 효율 증대

  • Lee, Dong-Hee (Materials Science and Engineering, Chungnam National University) ;
  • Lee, Jong-Hyeon (Materials Science and Engineering, Chungnam National University)
  • 이동희 (충남대학교 신소재공학과) ;
  • 이종현 (충남대학교 신소재공학과)
  • Received : 2018.09.28
  • Accepted : 2019.01.04
  • Published : 2019.01.31
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, as the interest in energy savings has increased, there has been increasing use of LED lighting, which is an eco-friendly device that replaces high energy consuming fluorescent lamps and incandescent lamps. In the case of a high output LED, however, the life time is shortened due to deterioration caused by heat generation. As a solution to this problem, this paper evaluated the LED life extension effect by increasing the convective heat transfer coefficient of the heat sink surface for LED packaging. A roughing process was carried out using sandpaper and sand blasting. The changes in surface roughness and surface area after each surface treatment process were evaluated quantitatively and the convective heat transfer coefficient was measured. When sandblasting and sandpaper were used to roughen the aluminum surface, a higher convection heat transfer coefficient was obtained compared to the untreated case, and a high heat dissipation efficiency of 82.76% was obtained in the sandblast treatment. Therefore, it is expected that the application of heat dissipation to the heat sink will extend the lifetime of the LED significantly and economically by increasing the heat efficiency.

최근 에너지 절감에 대한 관심도가 높아짐에 따라 에너지 소비가 높은 형광등과 백열등을 대체하는 친환경소재인 LED의 조명을 활용하는 움직임이 활발하다. 그러나, 고출력 LED의 경우 발열에 의한 열화현상 때문에 수명이 단축되는 현상이 발생하게 된다. 이에 대한, 해결방안으로 본 논문은 LED Packing중 방열판표면의 거칠기 처리를 통하여 열전달 계수를 증대시킴으로서 LED 수명연장 효과를 평가하였다. 거칠기 공정은 사포 및 샌드블라스트를 이용하여 진행하였다. 각 표면처리 공정에 따른 거칠기 및 표면적 변화를 정량적으로 평가하였으며, 열전달 계수를 측정하였다. 샌드블라스트, 사포를 이용하여 알루미늄 표면에 거칠기처리를 진행했을 경우 미 처리 시 보다 높은 대류 열전달 계수를 얻을 수 있었고, 샌드블라스트 처리 시 약 82.76%의 높은 방열 효율 향상을 얻을 수 있어, 이를 방열판에 적용할 시 큰 경제적 부담 없이 기존대비 더 높은 방열효율 증대를 통해 LED 수명을 대폭 연장 시킬 것으로 기대된다.

Keywords

SHGSCZ_2019_v20n1_170_f0001.png 이미지

Fig. 1. Cell models for convective heat transfer coefficient measurement

SHGSCZ_2019_v20n1_170_f0002.png 이미지

Fig. 2. Convective heat transfer coefficient with roughness values obtained by sandblast and sandpaper treatment

SHGSCZ_2019_v20n1_170_f0003.png 이미지

Fig. 3. Convective heat transfer coefficient according to the number of sandpaper

SHGSCZ_2019_v20n1_170_f0004.png 이미지

Fig. 4. Convective heat transfer coefficient according to sandblast pressure

SHGSCZ_2019_v20n1_170_f0005.png 이미지

Fig. 5. Surface morphology of #50 specimen obtained by OLS5000

SHGSCZ_2019_v20n1_170_f0006.png 이미지

Fig. 6. Surface morphology of #220 specimen obtained by OLS5000

SHGSCZ_2019_v20n1_170_f0007.png 이미지

Fig. 7. Surface morphology of sandblast pressure 2 specimen obtained by OLS5000

SHGSCZ_2019_v20n1_170_f0008.png 이미지

Fig. 8. Surface morphology of sandblast pressure 6 specimen obtained by OLS5000

Table 1. Average roughness value of Al plate according to the number of sand paper

SHGSCZ_2019_v20n1_170_t0001.png 이미지

Table 2. Average roughness value of Al plate according to sandblast pressure with 3 sec. of operation

SHGSCZ_2019_v20n1_170_t0002.png 이미지

Table 3. Relative surface area measured by a confocal laser(sandpaper)

SHGSCZ_2019_v20n1_170_t0003.png 이미지

Table 4. Relative surface area measured by a confocal laser(sandblast)

SHGSCZ_2019_v20n1_170_t0004.png 이미지

References

  1. Bang G-W, Kim Y-H. LED for plant growth regulators for the study of light on the device. Journal of Digital Convergence, Vol.10, No.7, pp. 262-272, 2012. DOI: http://doi.org/10.14400/JDPM.2012.10.7.267
  2. Duclos SJ, Jansma J, Bortscheller JC, Wojnarowski RJ. Phosphor coating with self-adjusting distance from LED chip. Google Patents; 2003.
  3. Eui Keun-Ahn, Hyeok-min Lee, Hyun-soo Lee, Hyun-soo Lee, Kwang- Sup Kim, Development of automotive Bi-Function LED Headlamp; Vol.2010, No.5, pp. 1428-1433, 2010.
  4. Seong-Yong Yang, Chin-Woo Yi, A Study on Reliability Analysis for Reliability Testing & Field Degradation Data of LED Lighting Vol.25, No.12, pp. 54-59, 2011.
  5. Soon Ho Hwang, Young Lim Lee, Study on Thermal Performance of Multiple LED Packages with Heat Pipes, Vol. 35, No.6, pp. 569-575, 2011.
  6. Choi B-M, Hong S-H, Jeong Y-B, Kim K-B, Lee S-G, Park S-G. Improved Thermal Resistance of an LED Package Interfaced with an Epoxy Composite of Diamond Powder Suspended in H 2 O 2. Korean Journal of Optics and Photonics, Vol.25, No.4, pp. 221-224, 2014. DOI: http://doi.org/10.3807/KJOP.2014.25.4.221
  7. Woo-Jin Seo, Young- Moon Yu, Hee-Lack Choi, Design and Optimization of Heat Dissipation Engine with 200W COB LED, Korea Institute of Illuminating and Electrical Installation, Vol.32, No.2, pp 38-46, 2018. DOI: http://doi.org/10.5207/JIEIE.2018.32.2.038
  8. Duck Young Moon, A study of the heat radiation performance for COB LED on the heatsink structure, Korea Industrial Technology University Industrial Technology. Business graduate school, 2016.
  9. Soon Ho Hwang, Young Lim Lee, Study on thermal performance of multiple LED Packages with heat pipes, The Korean Society of Mechanical Enginerrs, Vol.35, No.6, pp. 569-575, 2011. DOI: http://doi.org/10.3795/KSME-B.2011.35.6.569
  10. Hyeon sang jeong, Analysis of market trends and commercialization issues of heat dissipation materials and heat-bondingtechnology, KISTI, 2013, http://gift.kisti.re.kr/announce/analysis-report/2014/miriran_14054.pdf, 2018.09.14.
  11. You jin Ho, Choi Won Seok, Jang ByungHwa, A study on flow boiling heat transfer enhancement of graphene coating surface, Vol.2013, No.12, pp. 700-703, 2013.
  12. Hoing Lae Lee, Sung Min Ha, Yungjae Yoo, Sung-Goo Lee, Current trends in thermally conductive polymer composites, the Polymer Society of Korea, Vol.24, No.1, pp. 30-37, 2013.
  13. Jae ho Kim, Graffin Industrialization Breakthrough-plasma, vaccum magazine, 2017, http://www.kvs.or.kr/file/story/2017_06_08.pdf, 2018.09.14.
  14. J. Nikuradse, National Advisory committee for aeronautics, pp. 1-62, 1950.11.
  15. D. W SAVAGE, J. E MYERS, The effect of Artificial Surface Roughness on Heat and Momentum Transfer, Vol.9, No.5, pp. 694-701, 1963. DOI: http://doi.org/10.1002/aic.690090523
  16. Ventola L, Robotti F, Dialameh M, Calignano F, Manfredi D, Chiavazzo E, etal. Rough surfaces with enhanced heat transfer for electronics cooling by direct metal laser sintering. International Journal of Heat and Mass Transfer, Vol 75, pp. 58-74, 2014. DOI: http://doi.org/10.1016/j.ijheatmasstransfer.2014.03.037
  17. Ventola L, Chiavazzo E, Calignano F, Manfredi D, Asinari P, editors. Heat transfer enhancement by finned heat sinks with micro-structured roughness. Journal of Physics: Conference Series; Vol.494, No.494, 2014. DOI: http://doi.org/10.1088/1742-6596/494/1/012009
  18. Min-Sik Lee, Hyun-Ho Kim, Chung-Gil Kang, Effect of surface Roughness of Al5052/CFRP Composites on the Adhesion and Mechnical properties, Korean Society for Composite Materials, Vol.26, No.5, pp. 295-302, 2013. DOI: http://doi.org/10.7234/composres.2013.26.5.295
  19. Ventola L, Robotti F, Dialameh M, Calignano F, Manfredi D, Chiavazzo E, et al. Rough surfaces with enhanced heat transfer for electronics cooling by direct metal laser sintering. International Journal of Heat and Mass Transfer. Vol .75, pp. 58-74, 2014. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2014.03.037
  20. Ventola L, Chiavazzo E, Calignano F, Manfredi D, Asinari P, editors. Heat transfer enhancement by finned heat sinks with micro-structured roughness. Journal of Physics: Conference Series Vol.494, 2014. DOI: https://doi.org/10.1088/1742-6596/494/1/012009
  21. Laouamri H, Giljean S, Arnold G, Kolli M, Bouaouadja N, Tuilier M-H. Roughness influence on the optical properties and scratch behavior of acrylic coating deposited on sandblasted glass. Progress in Organic Coatings, Elsevier, Vol.101, pp. 400-406, 2016. DOI: https://doi.org/10.1016/j.porgcoat.2016.09.014
  22. SLATINEANU L, POTARNICHE S, COTEATA M, GRIGORAS I, GHERMAN L, NEGOESCU F. Surface roughness at aluminium parts sand blasting. Proceedings in Manufacturing Systems. 2, Proceeding in Manufacturing systems, Vol.6, No.2, 2011. DOI: https://doi.org/10.1016/j.porgcoat.2016.09.014
  23. Du-rye Oh, Jeong-Jae Kim, Jin-seon, Gook, Sung-geun Oh, Seung, Jae Lee, Ga-Ram Kim, Min-ho Lee, Surface Modification of Titanium by Sand Blasting and Alkali Treatment, Journal of Biomedical Meterials Research, Vol.39, No. 1, pp. 1-7, 2012. DOI: https://doi.org/10.14815/kjdm.2012.03.39.1.1
  24. Yunus Celgel, Afshin Ghajar, heat and mass transfer, pp 3-6, McGraw-Hill Publishing company, 2015.
  25. Kim Chan-Jung, assistant heat transfer, pp. 1-15, buman books Co. Ltd.