대한건축학회논문집 (Journal of the Architectural Institute of Korea)

  • 제37권8호
  • /
  • Pages.189-196
  • /
  • 2021
  • /
  • 2733-6239(pISSN)
  • /
  • 2733-6247(eISSN)
대한건축학회 (Architectural Institute of Korea)
권호 표지
DOI QR코드

DOI QR Code

열림 휨 모멘트를 받는 콘크리트 벽체 코너 접합부의 거동

Behavior of Corner Joints Subjected to Opening Bending Moment in Concrete Wall

  • 투고 : 2021.06.16
  • 심사 : 2021.08.06
  • 발행 : 2021.08.30
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, the structural behavior according to details of corner joint for precast concrete(PC) wall panels or in-situ reinforced concrete walls subjected to opening bending moment was investigated experimentally. Also, the pattern of crack and the corner efficiency of different reinforcement detailings were studied from a literature review. It is practically difficult to provide structural integrity so much that structural strength of corner joints in PC wall structure is equivalent to that of corner joints in cast-in-place, monolithic concrete wall structure. However, test results show that the efficiency of wet connection with loop bars, shear keys, and high strength non-shrink grouting for PC wall corner joints is greater than 100%. Therefore, it is recommended that the depth of shear key should be sufficient to resist the opening moment by interlocking and the strength of grout should be greater than that of the PC wall to increase structural integrity of corner joints.

키워드

과제정보

이 연구는 2021년도 국토교통과학기술진흥원(21RERP-B082884-8)의 연구비 지원에 의한 결과의 일부임.

참고문헌

  1. Abdul-Wahab, H. M. S., & Salman, S. A. R. (1999). Effect of Corner Angle on Efficiency of Reinforced Concrete Joints under Opening Bending Moment, ACI Structural Journal, 96(1), 115-121.
  2. Bang, J. S., Kang, K. S., & Han, K. S. (2015). Application of Building using Optimal Design Technique of Irregular Wall, Journal of the Computational Structural Engineering Institute of Korea, 28(1), 47-52. https://doi.org/10.7734/COSEIK.2015.28.1.47
  3. Campana, S., Ruiz, M. F., & Muttoni, A. (2013). Behaviour of Nodal Regions of Reinforced Concrete Frames subjected to Opening Moments and Proposals for their Reinforcement, Engineering Structures, 51, 200-210. https://doi.org/10.1016/j.engstruct.2013.01.029
  4. Darwin, D., Dolan, C. W., & Nilson, A. H. (2016). Design of Concrete Structures, 15th edition, McGraw-Hill Education, USA.
  5. Erik Skettrup, Jorgen Strabo, Niels Houmark Andersen, & Troels Brondum-Nielsen (1984). Concrete Frame Corners, ACI Journal, 81(6), 587-593.
  6. Fanella, D. A. (2016). Design Guide for Economical Reinforced Concrete Structures, Concrete Reinforcing Steel Institute, USA.
  7. Johansson, M. (2001). Reinforcement Detailing in Concrete Frame Corners, ACI Structural Journal, 98(1), 105-115.
  8. Kim, J. R., & Kim, J. Y. (2020). Analyses of Structural Behaviors According to Core Location in the Building with Symmetric Plan, Journal of The Korea Institute for Structural Maintenance and Inspection, 24(1), 116-124. https://doi.org/10.11112/JKSMI.2020.24.1.116
  9. Lal, R., Devgan, N. P., Singh, B., & Singh, S. P. (2015). Reinforcement Detailing for Opening Corners, International Journal of Engineering Sciences & Research Technology, 4(6), 1127-1134.
  10. LHI (2017). A Study on the Draw up Standard of Placing Drawing through the Setting up a Guideline for Bar Reinforcement, Land & Housing Institute, 2017-00, Korea.
  11. Moretti, M. L., Tassios, T. P., & Vintzileou, E. (2014). Behavior and Design of Corner Joints under Opening Bending Moment, ACI Structural Journal, 111(1), 3-14.
  12. Nilsson, I. H. E., & Losberg, A. (1976). Reinforced Concrete Corners and Joints subjected to Bending Moment, ASCE Journal of the Structural Division, 102(6), 1229-1254. https://doi.org/10.1061/JSDEAG.0004362
  13. Seo, S. Y., Yoon, S. J., & Kim, B. C. (2007). Hysteretic Behavior of R/C Corner Joint with Headed Reinforcements, Journal of the Architectural Institute of Korea (Structure and Construction Section) 23(8), 27-34.
  14. Tiong, P. L. Y., Chiew, S. P., & Teow, B. H. (2016). Case Study of Load-Bearing Precast Wall System subject to Low Seismic Intensity by Linear and Nonlinear Analyses, Case Studies in Structural Engineering, 6, 11-21. https://doi.org/10.1016/j.csse.2016.05.001
  15. Tolsma, K.V (2010). Precast Concrete Cores in High-Rise Buildings : Structural behaviour of Precast Corner Connections, Delft University of Technology, Master Thesis, Netherlands.
  16. Wight, J. K., & MacGregor, J. G. (2012). Reinforced Concrete : Mechanics and Design, 6th edition, Pearson Education Limited, USA.